AS/NZS 60079.0:2012
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Explosive atmospheres Equipment - General requirements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
22-02-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.This part of IEC 60079 specifies the general requirements for construction, testing and marking of electrical equipment and Ex Components intended for use in explosive atmospheres.
| Committee |
EL-014
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 033
|
| Pages |
88
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| IEC 60079-0:2011 | Identical |
Originated as AS/NZS 60079.0:2000.
Third edition 2008.
Fourth edition 2012.
| IEEE 303-2004 | IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations |
| AS/NZS 60079.26:2007 | Explosive atmospheres Equipment with equipment protection level (EPL) Ga |
| AS 1110.2-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Screws |
| AS/NZS 60079.2:2007 | Explosive atmospheres Equipment protection by pressurized enclosure 'p' |
| AS/NZS 60079.28:2007 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
| AS/NZS 60079.30.1:2007 | Explosive atmospheres Electrical resistance trace heating - General and testing requirements |
| AS/NZS 60079.5:2007 | Explosive atmospheres Equipment protection by powdered filling 'q' |
| AS 60034.5-2009 | Rotating electrical machines Degrees of protection provided by the integral design of rotating electrical machines (IP Code) - Classification |
| AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
| AS/NZS 60079.31:2011 | Explosive atmospheres Equipment dust ignition protection by enclosure 't' |
| AS/NZS 60079.15:2011 | Explosive atmospheres Equipment protection by type of protection 'n' |
| AS/NZS 61241.4:2002 | Electrical apparatus for use in the presence of combustible dust Type of protection 'pD' |
| AS 60034.1-2009 | Rotating electrical machines Rating and performance |
| AS 60947.1-2004 | Low-voltage switchgear and controlgear General rules |
| AS 1110.1-2000 | ISO metric hexagon bolts and screws - Product grades A and B - Bolts |
| AS/NZS 60079.11:2011 | Explosive atmospheres Equipment protection by intrinsic safety ‘i’ (Reconfirmed 2022) |
| AS/NZS 60079.6:2007 | Explosive atmospheres Equipment protection by oil immersion 'o' |
| AS/NZS 60079.18:2011 | Explosive atmospheres Equipment protection by encapsulation 'm' |
| AS/NZS 4029.2:2000 | Stationary batteries - Lead-acid Valve-regulated type (IEC 60896-2:1995, MOD) |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 62013.1:2001 | Caplights for use in mines susceptible to firedamp General requirements - Construction and testing in relation to the risk of explosion |
| AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
| AS/NZS 60079.1:2007 | Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
| AS/NZS 1421:1996 | ISO metric hexagon socket set screws |
| AS/NZS 60079.25:2011 | Explosive atmospheres Intrinsically safe electrical systems |
| AS/NZS 3800:2012 | Electrical equipment for explosive atmospheres - Repair and overhaul |
| AS/NZS 4641:2018 | Electrical equipment for detection of oxygen and other gases and vapours at toxic levels - General requirements and test methods |
| AS/NZS 3010:2017 | Electrical installations - Generating sets |
| AS/NZS 4871.6:2013 | Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment |
| AS/NZS 60079.33:2012 | Explosive atmospheres Equipment protection by special protection 's' (Reconfirmed 2024) |
| AS/NZS 2290.1:2014 | Electrical equipment for coal mines - Introduction, inspection and maintenance For hazardous areas |
| AS 4606-2012 | Grade S fire resistant and antistatic requirements for conveyor belting and conveyor accessories (Reconfirmed 2024) |
| AS/NZS 1680.2.4:2017 | Interior and workplace lighting Industrial tasks and processes |
| AS ISO 21789:2014 | Gas turbine applications - Safety |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.