ASHRAE 62 : 2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY
Hardcopy , PDF
23-07-2013
English
01-01-2001
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Purpose
2 Scope
3 Definitions
4 Classification
5 Systems and Equipment
6 Procedures
7 References
Appendix A - Conversion Factors (A-1), Parts Per
Million and Mass Per Unit Volume
Appendix B - Guidance for the Establishment of Air
Quality Criteria for the Indoor Environment
Appendix C - Rationale for Minimum Physiological
Requirements for Respiration Air Based on CO2
Concentration
Appendix D - Procedure for Use of Cleaned Recirculated Air
Appendix E - Ventilation Effectiveness
Appendix F - Rationale for Lag or Lead Time for
Transient Occupancy
Appendix G - Rationale for Reducing Outdoor Air When
Loads on a Multi-Zone System Are Unequal
Appendix H - Addenda Description Information
Applicable to all in-door or enclosed spaces that people may occupy. Covers the release of moisture in residential kitchens and bathrooms, locker rooms and swimming pools. Considers chemical, physical and biological contaminants that can affect air quality. Thermal comfort requirements are not included.
| Committee |
TC 4.3
|
| DevelopmentNote |
Redesignated as ASHRAE 62.1 (02/2005)
|
| DocumentType |
Standard
|
| Pages |
162
|
| PublisherName |
American Society of Heating, Refrigerating & Air Conditioning Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 15/30322689 DC : 0 | BS EN 16883 - CONSERVATION OF CULTURAL HERITAGE - GUIDELINES FOR IMPROVING THE ENERGY PERFORMANCE OF HISTORIC BUILDINGS |
| ASTM E 741 : 2011 : R2017 | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| ASTM E 1664 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| ASTM E 741 : 2011 | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| ASTM E 241 : 2009 | Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM E 1664 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors<rangeref></rangeref > |
| UFC 4-141-04 : Change 1 | UNIFIED FACILITIES CRITERIA - EMERGENCY OPERATIONS CENTER PLANNING AND DESIGN |
| ASTM E 1664 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| CSA B651 : 2012 : R2017 | ACCESSIBLE DESIGN FOR THE BUILT ENVIRONMENT |
| BS EN 16883:2017 | Conservation of cultural heritage. Guidelines for improving the energy performance of historic buildings |
| CSA B651 : 2012 : INC : UPD 1 : 2015 | ACCESSIBLE DESIGN FOR THE BUILT ENVIRONMENT |
| SAE AIR 4766 : 2012 | AIR QUALITY FOR COMMERCIAL AIRCRAFT CABINS |
| ASTM E 2619 : 2008 | Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings |
| ASTM E 1677 : 2011 : REDLINE | SPECIFICATION FOR AIR BARRIER (AB) MATERIAL OR SYSTEM FOR LOW-RISE FRAMED BUILDING WALLS |
| UFC 4-211-01 : Change 1 | UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS |
| ANSI Z245.41 : 2015 | FACILITIES FOR THE PROCESSING OF COMMINGLED RECYCLABLE MATERIALS - SAFETY REQUIREMENTS |
| CSA B651 : 2012 | ACCESSIBLE DESIGN FOR THE BUILT ENVIRONMENT |
| ASTM E 241 : 2009 : R2014 : EDT 1 | Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM E 1661 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| CSA Z8000 : 2011 : R2016 | CANADIAN HEALTH CARE FACILITIES |
| NASA STD 3001 VOL 2 : 2015 | NASA SPACE FLIGHT HUMAN-SYSTEM STANDARD - VOLUME 2: HUMAN FACTORS, HABITABILITY, AND ENVIRONMENTAL HEALTH |
| CSA Z8000 : 2011 | CANADIAN HEALTH CARE FACILITIES |
| CSA Z8000 : 2011 : INC : UPD 1 : 2013 | CANADIAN HEALTH CARE FACILITIES |
| ASHRAE 84 : 2013 | METHOD OF TESTING AIR-TO-AIR HEAT/ENERGY EXCHANGERS |
| ASTM E 1660 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| AIHA Z9.10 : 2010 | FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES |
| ASTM E 1661 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 1661 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 1660 : 1995 : REV A : R1999 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 1660 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 1661 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 1660 : 1995 : REV A : R2005 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| I.S. EN 16883:2017 | CONSERVATION OF CULTURAL HERITAGE - GUIDELINES FOR IMPROVING THE ENERGY PERFORMANCE OF HISTORIC BUILDINGS |
| SAE ARP85F | Air Conditioning Systems for Subsonic Airplanes |
| CSA Z204 : 1994(R1999) | GUIDELINES FOR MANAGING INDOOR AIR QUALITY IN OFFICE BUILDINGS |
| ASTM E 1664 : 1995 : REV A : R2012 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| ASTM E 2320 : 2004 : R2018 | Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions |
| ASTM E 2320 : 2004 : R2012 | Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions |
| ASTM E 2320 : 2004 | Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions |
| 05/30128995 DC : 0 | PREN 15251 - CRITERIA FOR THE INDOOR ENVIRONMENT INCULDING THERMAL, INDOOR AIR QUALITY, LIGHT AND NOISE |
| ASTM E 2267 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022) |
| ASTM E 2267 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality |
| EN 16883:2017 | Conservation of cultural heritage - Guidelines for improving the energy performance of historic buildings |
| MIL-HDBK-1024-1 Base Document:1994 | AVIATION OPERATIONAL AND SUPPORT FACILITIES |
| DIN EN 16883:2015-07 (Draft) | CONSERVATION OF CULTURAL HERITAGE - GUIDELINES FOR IMPROVING THE ENERGY PERFORMANCE OF HISTORIC BUILDINGS |
| SAE AIR4766/2 | Airborne Chemicals in Aircraft Cabins |
| ASTM E 2129 : 2010-11 | PRACTICE FOR DATA COLLECTION FOR SUSTAINABILITY ASSESSMENT OF BUILDING PRODUCTS |
| SAE AIR 4766/1 : 2011 | AIR QUALITY FOR COMMERCIAL AIRCRAFT CABIN - PARTICULATE CONTAMINANTS |
| CSA Z8001 : 2013 | COMMISSIONING OF HEALTH CARE FACILITIES |
| ASHRAE 100.6 : 1991 | ENERGY CONSERVATION IN EXISTING BUILDINGS - PUBLIC ASSEMBLY (IES COSPONSORED) |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| NFPA 90B : 2018 | INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
| UL 181:11ED 2013-07-25 | Factory-Made Air Ducts and Air Connectors |
| ASHRAE 55 : 2017 | THERMAL ENVIRONMENTAL CONDITIONS FOR HUMAN OCCUPANCY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.