ASME PTB 8 : 2014
Current
The latest, up-to-date edition.
Procurement Guidelines for Metallic Materials (PTB-8 - 2014)
Hardcopy , PDF
English
01-01-2014
Foreword
1 INTRODUCTION
2 SCOPE
3 ASME ADOPTION OF MATERIAL SPECIFICATIONS
4 GENERAL REQUIREMENTS IN MATERIAL
SPECIFICATIONS FOR VARIOUS PRODUCT FORMS
5 ADDITIONAL CONSIDERATIONS FOR MATERIAL
SPECIFICATIONS
6 API 5L SPECIFICATION FOR LINE PIPE
7 ASME CODE REQUIREMENTS
8 FABRICATION EFFECTS
9 MATERIALS DEGRADATION MECHANISMS
10 OTHER CODES AND STANDARDS, OR
RECOMMENDED PRACTICES
11 PAST MATERIALS PROBLEMS
12 VENDOR QUALIFICATIONS
13 SUGGESTED MEASURES FOR ORDERING MATERIALS
14 MATERIALS PURCHASE SPECIFICATIONS
References
APPENDIX A: SUGGESTED Materials Quality Control Programs
for Material Manufacturers and Suppliers
APPENDIX B: SA-516, Grade 70 Plate Sample Material
Procurement Specification
APPENDIX C: SA-387, Grade 11, Class 1 Plate Sample Material
Procurement Specification
This report discusses the requirements in the ASME Codes and in the ASME material specifications for metallic materials, addresses the various issues that affect the materials, and provides guidelines for evaluating materials manufacturers and materials specifications preparation that include the requirements for procuring material for ASME Code construction.
| DocumentType |
Standard
|
| ISBN |
9780791869475
|
| Pages |
56
|
| PublisherName |
American Society of Mechanical Engineers
|
| Status |
Current
|
The ASME Codes and material specifications include specific requirements for use of the materials in ASME Code construction. However, they do not address all requirements.
| NACE 8X194 : 2006 | MATERIALS AND FABRICATION PRACTICES FOR NEW PRESSURE VESSELS USED IN WET H[2]S REFINERY SERVICE |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| ASME B31.1 : 2016 | POWER PIPING |
| ASME PV CODE 3 NCA DIV 1&2 : 2017 | BPVC Section III-Rules for Constructions of Nuclear Facility Components BOILER AND PRESSURE VESSEL CODE - RULES FOR THE CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - GENERAL REQUIREMENTS FOR DIVISION 1 AND DIVISION 2 |
| API 934-C : 2008 | MATERIALS AND FABRICATION OF 1 [1/4]CR-[1/2]MO STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-PRESSURE HYDROGEN SERVICE OPERATING AT OR BELOW 825 DEGREES F (441 DEGREES C) |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ASME B31.3:2016 | PROCESS PIPING |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASME PV CODE 4 : 2017 | BPVC Section IV-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF HEATING BOILERS |
| API TR 934-D : 2010 | TECHNICAL REPORT ON THE MATERIALS AND FABRICATION ISSUES OF 1[1/4]CR-[1/2]MO AND 1CR-[1/2]MO STEEL PRESSURE VESSELS |
| ASME PV CODE 12 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION AND CONTINUED SERVICE OF TRANSPORT TANKS |
| NACE SP 04 72 : 2015 | METHODS AND CONTROLS TO PREVENT IN-SERVICE ENVIRONMENTAL CRACKING OF CARBON STEEL WELDMENTS IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| API 571 : 2011 | DAMAGE MECHANISMS AFFECTING FIXED EQUIPMENT IN THE REFINING INDUSTRY |
| ASME PV CODE 2D METRIC : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (METRIC) |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| ASME PV CODE 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
| API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
| API 934-E : 2010 | RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C) |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| API TR 934-B : 2011 | FABRICATION CONSIDERATIONS FOR VANADIUM-MODIFIED CR-MO STEEL HEAVY WALL PRESSURE VESSELS |
| ASME PV CODE 2A : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END) |
| ASME PV CODE 2D CUSTOMARY : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - PROPERTIES (CUSTOMARY) |
| NACE SP 04 03 : 2015 | AVOIDING CAUSTIC STRESS CORROSION CRACKING OF REFINERY EQUIPMENT AND PIPING |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.