ASTM E 2371 : 2013
|
Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
ASTM E 1 : 2014 : REDLINE
|
Standard Specification for ASTM Liquid-in-Glass Thermometers |
ASTM A 537/A537M : 2013
|
Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
CFR 29(PTS1900-1910) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ASTM A 204/A204M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
ASTM B 96/B96M : 2016 : REDLINE
|
Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels |
ISO 544:2011
|
Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings |
ASTM B 575 : 2017 : REDLINE
|
Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium Alloy Plate, Sheet, and Strip |
ASTM A 29/A29M : 2016 : REDLINE
|
Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
ISO 864:1988
|
Arc welding Solid and tubular cored wires which deposit carbon and carbon manganese steel Dimensions of wires, spools, rims and coils |
ISO 2560:2009
|
Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
ASTM A 516/A516M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
AWS A1.1 : 2016
|
METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY |
AWS A5.5 : 1996
|
SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
ASTM E 260 : 1996
|
Standard Practice for Packed Column Gas Chromatography |
ISO 14344:2010
|
Welding consumables — Procurement of filler materials and fluxes |
ASTM B 582 : 2007
|
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip |
ISO 3580:2017
|
Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification |
ASTM E 1473 : 2016 : REDLINE
|
Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
AWS A5.1 : 91(R1999)
|
SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
AWS A5.01M/A5.01 : 2013
|
WELDING CONSUMABLES - PROCUREMENT OF FILLER METALS AND FLUXES |
ISO 18274:2010
|
Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification |
AWS F3.2M/F3.2 : 2001
|
VENTILATION GUIDE FOR WELD FUME |
ASTM E 350 : 2012-09
|
TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON |
AWS A4.3 : 1993
|
DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING |
ASTM E 1409 : 2013 : REDLINE
|
Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion |
ISO 31-0:1992
|
Quantities and units Part 0: General principles |
ASTM B 214 : 2016 : REDLINE
|
Standard Test Method for Sieve Analysis of Metal Powders |
ASTM E 353 : 2014 : REDLINE
|
Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
ISO 14172:2015
|
Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification |
ASTM B 152/B152M : 2013 : REDLINE
|
Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
AWS A4.4M : 2001
|
STANDARD PROCEDURES FOR DETERMINATION OF MOISTURE CONTENT OF WELDING FLUXES AND WELDING ELECTRODE FLUX COVERINGS |
ASTM B 103/B103M : 2015 : REDLINE
|
Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar |
ASTM B 160 : 2005 : EDT 1
|
Standard Specification for Nickel Rod and Bar |
MIL-S-24645 Revision A:1990
|
STEEL PLATE, SHEET, OR COIL, AGE HARDENING ALLOY, STRUCTURAL, HIGH YIELD STRENGTH (HSLA 8O) |
ASTM F 288 : 1996
|
Standard Specification for Tungsten Wire for Electron Devices and Lamps |
AWS B4.0M : 2000
|
STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
ASTM B 209 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
ASTM E 11 : 2017 : REDLINE
|
Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ISO 80000-1:2009
|
Quantities and units — Part 1: General |
MIL-E-21562 Revision E:1989
|
ELECTRODES AND RODS - WELDING, BARE, NICKEL ALLOY |
AWS A5.01 : 93(R1999)
|
FILLER METAL PROCUREMENT GUIDELINES |
AWS A5.02/A5.02M : 2007
|
SPECIFICATION FOR FILLER METAL STANDARD SIZES, PACKAGING, AND PHYSICAL ATTRIBUTES |
ASTM A 533/A533M : 2016 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
AWS A5.32/A5.32M : 2011
|
WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES |
ANSI Z49.1 : 2012
|
SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES |
ASTM A 517/A517M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered |
MIL E 22200/1 : G
|
ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM AND HIGH TENSILE STEEL, AS WELDED OR STRESS-RELIEVED WELD APPLICATION |
ASTM A 515/A515M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
ASTM A 203/A203M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
ASTM E 1371 : 2005
|
Standard Test Method for Gravimetric Determination of Phosphorus in Phosphorus-Copper Alloys or Phosphorus-Copper-Silver Alloys (Withdrawn 2006) |
AWS B4.0:2016
|
STANDARD METHODS FOR MECHANICAL TESTING OF WELDS |
ISO 18275:2011
|
Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification |
ASTM A 588/A588M : 2015 : REDLINE
|
Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
ASTM E 354 : 2014 : REDLINE
|
Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
AWS A3.0M/A3.0 : 2010
|
STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING |
ASTM A 285/A285M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
AWS A5.8 : 1992
|
FILLER METALS FOR BRAZING AND BRAZE WELDING, SPECIFICATION FOR |
ASTM A 302/A302M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
ASTM B 122/B122M : 2016 : REDLINE
|
Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 333 : 2003
|
Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip |