ASTM E 1219 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
ASTM E 273 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
API 934-E : 2018
|
RECOMMENDED PRACTICE FOR MATERIALS AND FABRICATION OF 1[1/4]CR-[1/2]MO STEEL PRESSURE VESSELS FOR SERVICE ABOVE 825 DEGREES F (440 DEGREES C) |
ASTM E 2373/E2373M : 2014 : REDLINE
|
Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique |
BS ISO 11484:2009
|
Steel products. Employers qualification system for non-destructive testing (NDT) personnel |
ASTM E 2700 : 2014 : REDLINE
|
Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays |
MIL-DTL-46100 Revision E:2008
|
ARMOR PLATE, STEEL, WROUGHT, HIGH-HARDNESS |
ASTM E 1417/E1417M : 2016 : REDLINE
|
Standard Practice for Liquid Penetrant Testing |
ASTM E 1955 : 2004 : R2014
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs |
API 577 : 2013
|
WELDING PROCESSES, INSPECTION, AND METALLURGY |
ASTM E 498 : 1995 : R2000
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM E 1118 : 2005
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
ASTM E 703 : 2014 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals |
SAE AS 6081 : 2012
|
FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS |
ASTM E 1571 : 2011 : R2016 : EDT 1
|
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
ASTM E 498 : 1995 : R2006
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM E 1030/E1030M : 2015 : REDLINE
|
Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 3045 : 2016
|
Standard Practice for Crack Detection Using Vibroacoustic Thermography |
ASTM E 2984/E2984M : 2014
|
Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization |
ASTM E 1030 : 2005
|
Standard Test Method for Radiographic Examination of Metallic Castings |
ASTM E 1955 : 2004 : R2009
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
ASTM E 1066 : 1995 : R2000
|
Standard Test Method for Ammonia Colorimetric Leak Testing |
ASTM E 494 : 2015 : REDLINE
|
Standard Practice for Measuring Ultrasonic Velocity in Materials |
ASTM E 1444 : 2005
|
Standard Practice for Magnetic Particle Testing |
API 575 : 2014
|
INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
ASTM E 2661/E2661M : 2015 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications |
ASTM E 1495/E1495M : 2017 : REDLINE
|
Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
ASTM E 1817 : 2008
|
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 1603/E1603M : 2011 : R2017
|
Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
ASTM E 2581 : 2014 : REDLINE
|
Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications |
ASTM E 1312 : 2009 : R2013 : EDT 1
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
NFPA 1901:2016
|
AUTOMOTIVE FIRE APPARATUS |
ASME PTB 2 : 2009
|
GUIDE TO LIFE CYCLE MANAGEMENT OF PRESSURE EQUIPMENT INTEGRITY |
NACE SP 03 13 : 2013
|
GUIDED WAVE TECHNOLOGY FOR PIPING APPLICATIONS |
ASTM E 1209 : 2010
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
MIL-DTL-32332 Base Document:2009
|
ARMOR PLATE, STEEL, WROUGHT, ULTRA-HIGH-HARDNESS |
NFPA 1914 : 2002
|
TESTING FIRE DEPARTMENT AERIAL DEVICES |
ASTM E 1208 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
ASTM C 1331 : 2018 : REDLINE
|
Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method |
ASTM E 2907/E2907M : 2013
|
Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing |
ASTM E 2928/E2928M : 2017 : REDLINE
|
Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique |
ASTM E 2024 : 2005
|
Standard Test Methods for Atmospheric Leaks Using a Thermal Conductivity Leak Detector |
SAE AMS I 83387 : 2016
|
INSPECTION PROCESS, MAGNETIC RUBBER |
ASTM E 569/E569M : 2013 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
ASTM E 751/E751M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
ASTM E 1931 : 2016 : REDLINE
|
Standard Guide for Non-computed X-Ray Compton Scatter Tomography |
ASTM E 1000 : 2016 : REDLINE
|
Standard Guide for Radioscopy |
ASTM E 1030 : 2005 : R2011
|
Standard Test Method for Radiographic Examination of Metallic Castings |
ASTM E 1255 : 2016 : REDLINE
|
Standard Practice for Radioscopy |
ASTM E 1496 : 2005 : R2010
|
Standard Test Method for Neutron Radiographic Dimensional Measurements (Withdrawn 2012) |
ASTM E 1418 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
ASTM E 1359 : 2017 : REDLINE
|
Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies |
ASTM E 2598 : 2007
|
Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
ASTM E 749/E749M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Monitoring During Continuous Welding |
ASTM E 2479 : 2016 : REDLINE
|
Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves |
ASTM E 1496 : 2005
|
Standard Test Method for Neutron Radiographic Dimensional Measurements |
ASTM E 1210 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
ASTM E 3024/E3024M : 2016
|
Standard Practice for Magnetic Particle Testing for General Industry |
ASTM E 498/E498M : 2011 : R2017
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ISO/TS 11774:2011
|
Non-destructive testing — Performance-based qualification |
ASTM E 543 : 2015 : REDLINE
|
Standard Specification for Agencies Performing Nondestructive Testing |
ASTM E 1888/E1888M : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
ASME PV CODE 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF POWER BOILERS |
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
ASME PV CODE 11 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS |
ASTM E 588 : 2003 : R2009
|
Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
MIL-HDBK-1823 Revision A:2009
|
NONDESTRUCTIVE EVALUATION SYSTEM, RELIABILITY ASSESSMENT |
ASTM E 588 : 2003
|
Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
ASTM E 214 : 2005
|
Standard Practice for Immersed Ultrasonic Testing by the Reflection Method Using Pulsed Longitudinal Waves (Withdrawn 2007) |
ASTM E 690 : 2015 : REDLINE
|
Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes |
ASTM E 2983 : 2014
|
Standard Guide for Application of Acoustic Emission for Structural Health Monitoring |
ASTM E 1220 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
ASTM E 1033 : 2013 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature |
ASTM E 1930/E1930M : 2017 : REDLINE
|
Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission |
API 570 REDLINE : 2009
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
ASTM E 1118/E1118M : 2016 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
ASTM E 1817 : 2008 : R2014
|
Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) |
ASTM E 499 : 1995 : R2000
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
ISO 11484:2009
|
Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
ASTM E 2033 : 2017 : REDLINE
|
Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
API 5C8 : 2017
|
CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING |
ASTM E 797/E797M : 2015 : REDLINE
|
Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
ASTM E 1962 : 2014 : REDLINE
|
Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques |
B339-14
|
Cylinders, spheres, and tubes for the transportation of dangerous goods |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
ASTM E 2985/E2985M : 2014
|
Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy |
ASTM E 2981 : 2015
|
Standard Guide for Nondestructive Testing of the Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 1067/E1067M : 2018 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
ASTM E 493/E493M : 2011
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
ASTM E 2580 : 2017 : REDLINE
|
Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications |
ASTM E 2191/E2191M : 2016 : REDLINE
|
Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission |
ASTM E 588 : 2003 : R2014
|
Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
ASTM E 1742/E1742M : 2018 : REDLINE
|
Standard Practice for Radiographic Examination |
ASTM E 498/E498M : 2011
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
ASTM E 2884 : 2017 : REDLINE
|
Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays |
ASTM E 1961 : 2016 : REDLINE
|
Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units |
ASTM E 1211/E1211M : 2017 : REDLINE
|
Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
ASTM E 1161 : 2009 : R2014
|
Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
NASA STD 8719.9 : 2015
|
LIFTING STANDARD |
NASA STD 5003 : 0
|
FRACTURE CONTROL REQUIREMENTS FOR PAYLOADS USING THE SPACE SHUTTLE |
ASTM E 215 : 2016 : REDLINE
|
Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |
ASTM E 499/E499M : 2011 : R2017
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
ASTM E 114 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing |
ASTM E 1312 : 2009
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
ASTM E 309 : 2016 : REDLINE
|
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ASTM E 587 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Angle-Beam Contact Testing |
ASTM E 1212 : 2017 : REDLINE
|
Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies |
API RP 2611 : 2011
|
TERMINAL PIPING INSPECTION - INSPECTION OF IN-SERVICE TERMINAL PIPING SYSTEMS |
ASTM E 1603/E1603M : 2011
|
Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
AWS D14.4/D14.4M : 2012
|
SPECIFICATION FOR THE DESIGN OF WELDED JOINTS IN MACHINERY AND EQUIPMENT |
09/30179492 DC : 0
|
BS ISO 11774 - NON-DESTRUCTIVE TESTING - PERFORMANCE BASED QUALIFICATION |
AWS C7.3 : 2016
|
PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING |
ASTM E 1066 : 1995 : R2006
|
Standard Test Method for Ammonia Colorimetric Leak Testing |
ASTM E 427 : 1995 : R2006
|
Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) (Withdrawn 2013) |
ASTM E 1571 : 2011
|
Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
ASTM E 3100 : 2017
|
Standard Guide for Acoustic Emission Examination of Concrete Structures |
ASTM E 493 : 2006
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
ASTM E 2076/E2076M : 2015 : REDLINE
|
Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
API 573 : 2013
|
INSPECTION OF FIRED BOILERS AND HEATERS |
API 620 CHINESE : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
API 510 CHINESE : 2014
|
PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
API 570 CHINESE : 2009
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
API 620 : 2013
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
ASTM E 664/E664M : 2015 : REDLINE
|
Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method |
ASTM E 426 : 2016 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
API 620 REDLINE : 2008
|
DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
ASTM E 1774 : 2017 : REDLINE
|
Standard Guide for Electromagnetic Acoustic Transducers (EMATs) |
ASTM E 2076 : 2005
|
Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
ASTM E 2338 : 2017 : REDLINE
|
Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards |
ASTM E 3052 : 2016
|
Standard Practice for Examination of Carbon Steel Welds Using Eddy Current Array |
ASTM E 2375 : 2016 : REDLINE
|
Standard Practice for Ultrasonic Testing of Wrought Products |
ASTM E 1736 : 2015 : REDLINE
|
Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
ASTM E 493/E493M : 2011 : R2017
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
API 1615 : 2011
|
INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
API 650 : 2013+ADD 3 : 2018
|
WELDED TANKS FOR OIL STORAGE |
API 650 CHINESE : 2013
|
WELDED TANKS FOR OIL STORAGE |
ASTM E 571 : 2012 : REDLINE
|
Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products |
ASTM E 2863 : 2017 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization |
AISC 360 : 2016
|
SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
API 570 : 2016
|
PIPING INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION OF PIPING SYSTEMS |
ASTM E 499/E499M : 2011
|
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
ASTM E 2096/E2096M : 2016 : REDLINE
|
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing |
ASTM E 2906/E2906M : 2013
|
Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles |
ASTM E 1955 : 2004
|
Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs |
ASTM E 1001 : 2016 : REDLINE
|
Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves |
ASTM E 499 : 1995 : R2006
|
Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
API 510 : 2014
|
PRESSURE VESSEL INSPECTION CODE: IN-SERVICE INSPECTION, RATING, REPAIR, AND ALTERATION |
ASTM E 2261/E2261M : 2017 : REDLINE
|
Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique |
API 577 CHINESE : 2013
|
WELDING PROCESSES, INSPECTION AND METALLURGY |
ASTM E 1004 : 2017 : REDLINE
|
Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM E 1161 : 2009
|
Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
SAE AS 6171/5 : 2016
|
TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RADIOLOGICAL TEST METHODS |
ASTM E 2930 : 2013
|
Standard Practice for Pressure Decay Leak Test Method |
API TR 17TR8 : 2018
|
HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
ASTM E 1570 : 2011 : REDLINE
|
PRACTICE FOR COMPUTED TOMOGRAPHIC (CT) EXAMINATION |
ASTM E 2598/E2598M : 2013 : REDLINE
|
Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers |
ASTM E 2478 : 2011 : R2016
|
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
ASTM E 2698 : 2010
|
Standard Practice for Radiological Examination Using Digital Detector Arrays |
ASTM E 2905/E2905M : 2013 : REDLINE
|
PRACTICE FOR EXAMINATION OF MILL AND KILN GIRTH GEAR TEETH - ELECTROMAGNETIC METHODS |
ASTM E 2982 : 2014
|
Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications |
ASTM E 1603 : 1999
|
Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode |
ASTM E 427 : 1995 : R2000
|
Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
ASTM E 1814 : 2014 : REDLINE
|
Standard Practice for Computed Tomographic (CT) Examination of Castings |
API 575 CHINESE : 2014
|
INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
API 1615 REDLINE : 2011
|
INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
API 650 : 2013
|
WELDED TANKS FOR OIL STORAGE |
ASTM C 1332 : 2018 : REDLINE
|
Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique |
ASTM E 1139/E1139M : 2017 : REDLINE
|
Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
ASTM E 1606 : 2015 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes |
ASTM E 2478 : 2011
|
Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission |
ASME B31.3 SPANISH : 2010
|
PROCESS PIPING |