ASTM A 1008/A1008M : 2016-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SPECIFICATION FOR STEEL, SHEET, COLD-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY, SOLUTION HARDENED, AND BAKE HARDENABLE
Published date
01-09-2016
Superseded date
14-08-2020
Sorry this product is not available in your region.
CONTAINED IN VOL. 01.03, 2017 Defines cold-rolled, carbon, structural, high-strength low-alloy, high-strength low-alloy with improved formability, solution hardened, and bake hardenable steel sheet, in coils and cut lengths.
| Committee |
A 01
|
| DevelopmentNote |
Supersedes ASTM A366/A366M, ASTM A607, ASTM A611, ASTM A620/A620M, ASTM A715, ASTM A963/A963M and ASTM A969/A969M and ASTM A 1008 (11/2000)
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| Supersedes |
| BS ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ASTM A 599/A599M : 2007 : R2012 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
| ASTM A 599/A599M : 2007 : R2017 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
| ASTM A 599/A599M : 2007 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
| MIL-DTL-2439 Revision G:2014 | Container, Ammunition, Fiber, Spirally Wound |
| TT-P-28 Revision H:2007 | Coating, Heat Resisting |
| MIL-PRF-18458 Revision C:2002 | Grease, Wire Rope and Exposed Gear |
| MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
| MS75009 Revision J:2005 | Bracket Assembly, Resistor (Power Type) |
| MIL-STD-2003-3 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Penetrations) |
| MIL-PRF-46002 Revision D:2010 | Preservative Oil, Contact and Volatile Corrosion-Inhibited |
| MIL-DTL-14055 Revision G:2014 | Cup, Hydraulic Brake Actuating Cylinder: Synthetic Rubber |
| MIL-STD-2148 Revision A:2016 | Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs |
| A-A-52559 Revision A:2010 | Guard, Roadway Crossing (Metric) |
| MIL-STD-2003-2 Revision A:2009 | Electric Plant Installation Standard Methods for Surface Ships and Submarines (Equipment) |
| A-A-52406 Revision B:2010 | Clamp, Loop, Muffler |
| KKK-W-291 Revision G:2016 | Wheelbarrows (Future acquisitions for this material should refer to A-A-3135) |
| MIL-DTL-53022 Revision E:2012 | Primer, Epoxy Coating, Corrosion Inhibiting Lead and Chromate Free |
| A-A-52505 Revision A:2011 | Retainer, Battery (Metric) |
| OO-S-256 Revision K:2012 | Sewing Machine, Industrial, General Specification for |
| MIL-PRF-22750 Revision G:2011 | Coating, Epoxy, High-Solids |
| ASTM F 821/F821M : 2001 : R2012 | Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine |
| ASTM F 782 : 2001 : R2007 | Standard Specification for Doors, Furniture, Marine |
| ASTM F 782 : 2001 | Standard Specification for Doors, Furniture, Marine |
| ASTM F 782 : 2001 : R2012 | Standard Specification for Doors, Furniture, Marine |
| ASTM F 1178 : 2011 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| MS90908 Revision C:2011 | Filler Tube, Fuel Tank-Military Vehicles |
| ISO 13887:2017 | Steel sheet, cold-reduced, of higher yield strength with improved formability |
| ANSI/AWWA D110:2013(R2018) | WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
| ASTM C 361 : 2019 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE |
| ASTM A 794/A794M : 2012 | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled |
| ASTM A 1092 : 2015 | Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet |
| BS ISO 13887:2017 | Steel sheet, cold-reduced, of higher yield strength with improved formability |
| ASTM F 1244 : 2008 | Standard Specification for Berths, Marine |
| ASTM F 1244 : 2008 : R2013 | Standard Specification for Berths, Marine |
| ASTM A 794/A794M : 2012 : R2017 | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled |
| MIL-DTL-53030 Revision D:2011 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL-DTL-53072 Revision F:2017 | Chemical Agent Resistant Coating (CARC) System Application Procedures and Quality Control Inspection |
| ASTM A 917 : 2008 : R2015 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
| ISO 4997:2015 | Cold-reduced carbon steel sheet of structural quality |
| ACI 543R : 2012 | GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
| ASTM D 609 : 2017 : REDLINE | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| MIL-PRF-32550 Base Document:2016 | Metal-Rich Primer |
| ACI 350.5 : 2012 | SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES |
| ASTM C 754 : 2017-02 | SPECIFICATION FOR INSTALLATION OF STEEL FRAMING MEMBERS TO RECEIVE SCREW-ATTACHED GYPSUM PANEL PRODUCTS |
| MIL-PRF-81705 Revision E:2009 | Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable |
| MIL-DTL-6054 Revision G:2007 | Drum, Metal-Shipping and Storage |
| MIL-PRF-14105 Revision E:2011 | Paint, Heat-Resisting (for Steel Surfaces) |
| ASTM C 1423 : 2016 : REDLINE | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM A 917 : 2008 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
| ASTM A 749/A749M : 2014 : REDLINE | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| ASTM F 2435 : 2015 : REDLINE | Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe |
| ASTM F 2562/F2562M : 2015 : REDLINE | Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
| ASTM A 879/A879M : 2012 | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
| ASTM A 879/A879M : 2012 : R2017 | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
| A-A-52444 Revision A:2011 | Gaskets: Combination of Metal and Nonasbestos Facing Material (Metric) |
| ASTM F 821/F821M : 2001 : R2007 : EDT 1 | Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine |
| ASTM C 361M : 2016 : REDLINE | SPECIFICATION FOR REINFORCED CONCRETE LOW-HEAD PRESSURE PIPE [METRIC] |
| ASTM F 821/F821M : 2001 | Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine |
| ASTM F 1267 : 2015-12 | SPECIFICATION FOR METAL, EXPANDED, STEEL |
| ANSI A250.8 : 2014 | SPECIFICATIONS FOR STANDARD STEEL DOORS AND FRAMES |
| NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
| ASTM F 1178 : 2011 : R2015 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
| ASTM F 2408 : 2016 : REDLINE | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
| ASCE/SEI 10 15 : 2015 | DESIGN OF LATTICED STEEL TRANSMISSION STRUCTURES |
| MS35644 Revision G:2011 | Filler Neck: Fuel Tank-Military Vehicles |
| ASTM A 568/A568M : 2019 : REV A : REDLINE | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| DSCC 88052 : D | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, SCREW ACTUATED, METAL |
| NAAMM HMMA 863 : 2014 | GUIDE SPECIFICATIONS FOR DETENTION SECURITY HOLLOW METAL DOORS AND FRAMES |
| ASME B107.500 : 2010 | PLIERS |
| PIP ARS08111 : 2012 | STANDARD STEEL DOORS AND FRAMES SUPPLIER SPECIFICATION |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| DSCC 84168 : F | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL |
| NAAMM HMMA 862 : 2013 | GUIDE SPECIFICATIONS FOR COMMERCIAL SECURITY HOLLOW METAL DOORS AND FRAMES |
| NAAMM HMMA 861 : 2014 | GUIDE SPECIFICATIONS FOR COMMERCIAL HOLLOW METAL DOORS AND FRAMES |
| PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
| ASTM E 517 : 2000 : R2006 | Standard Test Method for Plastic Strain Ratio r for Sheet Metal |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.