Skip to content
Please enter a keyword to search

  • MIL-PRF-22750 Revision G:2011

    Current The latest, up-to-date edition.

    COATING, EPOXY, HIGH-SOLIDS

    Available format(s):  PDF

    Language(s): 

    Published date: 

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. REQUIREMENTS
    4. VERIFICATION
    5. PACKAGING
    6. NOTES

    Abstract - (Show below) - (Hide below)

    Specifies the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter (g/l) (2.8 pounds/gallon (lbs/gal)).

    General Product Information - (Show below) - (Hide below)

    Committee FSC 8010
    Development Note Supersedes MIL C 22750 (E). (09/2011)
    Document Type Standard
    Product Note NEW CHILD NOT 1 2019 IS NOW ADDED.
    Publisher US Military Specs/Standards/Handbooks
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
    MIL-DTL-32403 Base Document:2012 Fire Extinguisher, Employing HFC-227ea Agent Enhanced with Special Sodium Bicarbonate Powder (HFC-227ea/SBCS), Portable, with Bracket
    MIL-DTL-53072 Revision F:2017 CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION
    MIL-W-13855 Revision D:1973 WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR
    MIL-DTL-85670 Revision D:2012 ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A
    MIL-PRF-32405 Base Document:2013 CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC
    MIL-PRF-6799 Revision L:2010 COATINGS, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION
    MIL-DTL-14072 Revision F:2013 FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
    MIL-DTL-45068 Revision E:2006 LIGHT, DOME, VEHICULAR, 24 VOLT DC
    MIL-DTL-62366 Revision D:2010 RING ASSEMBLIES, ELECTRICAL CONTACT
    MIL-STD-186 Revision F:2002 PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
    MIL-DTL-55041 Revision F:2012 Switches, Waveguide, General Specification for
    MIL-PRF-7907 Revision C:2007 Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces)
    MIL-DTL-10215 Revision M:2010 SPEEDOMETERS, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES, FLEXIBLE SHAFT ASSEMBLY CORES AND ADAPTERS
    MIL-DTL-18264 Revision E:2015 FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF
    MIL-PRF-85704 Revision C:1998 CLEANING COMPOUND, TURBINE ENGINE GAS PATH
    ASTM E 2463 : 2011 : REDLINE PERFORMANCE SPECIFICATION FOR CARGO BED COVER (CBC) M105A2 TRAILER, TYPE 2
    MIL-STD-7179 Revision A:2009 Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment
    MIL-DTL-62481 Revision A:1998 INTERCOMMUNICATION CONTROL UNIT
    MIL-STD-171 Revision F:2011 FINISHING OF METAL AND WOOD SURFACES
    MIL-DTL-62461 Revision E:1998 TRANSMISSION ASSEMBLY
    SAE AMS 3167 : 2005 SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
    ASTM E 2517 : 2013 : REDLINE Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
    MIL-DTL-53077 Revision A:2011 MOUNTING KIT: M1, ROLLER, MINE CLEARING TRACK-WIDTH, TANK MOUNTED
    MIL-PRF-87937 Revision D:2001 CLEANING COMPOUND, AEROSPACE EQUIPMENT
    SAE AMS 3092 : 2015 RELEASE AGENT, FOR USE DURING FORM-IN-PLACE GASKET PREPARATION

    Standards Referencing This Book - (Show below) - (Hide below)

    FED-STD-313 Revision D:1996 MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
    ASTM D 5895 : 2013 : REDLINE Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
    MIL-PRF-23377 Revision K:2012 PRIMER COATINGS: EPOXY, HIGH-SOLIDS
    ASTM D 1200 : 2010 Standard Test Method for Viscosity by Ford Viscosity Cup
    MIL-DTL-53030 Revision D:2011 Primer Coating, Epoxy, Water Based, Lead and Chromate Free
    MIL-DTL-53022 Revision E:2012 PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE
    MIL-PRF-87257 Revision C:2017 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
    MIL-DTL-5541 Revision F:2006 Chemical Conversion Coatings on Aluminum and Aluminum Alloys
    ASTM D 610 : 2008 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
    TT-R-2918 Revision A:2001 REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS)
    ASTM D 2244 : 2016 : REDLINE Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    ASTM G 154 : 2016 : REDLINE Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
    MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
    MIL T 81772 : B THINNER, AIRCRAFT COATING
    MIL-DTL-12468 Revision E:2009 DECONTAMINATING AGENT, STB
    ASTM G 155 : 2013 : REDLINE Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
    MIL-PRF-85582 Revision E:2012 PRIMER COATINGS: EPOXY, WATERBORNE
    ASTM D 522 : 1993 : REV A Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
    FED-STD-595 Revision C:2008 COLORS USED IN GOVERNMENT PROCUREMENT
    ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
    TT-C-490 Revision F:2013 CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS)
    ASTM E 1331 : 2015 : REDLINE Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective