ASTM A 1105 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Corrugated Steel Manhole Assemblies
Hardcopy , PDF
14-11-2022
English
08-12-2017
CONTAINED IN VOL. 01.06, 2017 Defines the manufacture and purchase requirements of products used for assembly and construction of circular reinforced corrugated steel manholes used in sewer and water works.
Committee |
A 05
|
DocumentType |
Standard
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This specification covers the manufacture and purchase requirements of products used for assembly and construction of circular reinforced corrugated steel manholes used in sewer and water works. Products covered by this specification are not normally used for the conveyance of sanitary or industrial wastes. The steel sheet used in fabrication of the manhole structures has a protective metallic coating of zinc (galvanizing), aluminum, 55 % aluminum-zinc alloy, or zinc-5 % aluminum-mischmetal alloy, or a polymer pre-coating.
1.2Part I, Sections 1 through 11, of this specification presents general requirements and requirements that are common to each corrugated steel product in the sections outlined in 1.3.
1.3Part II of this specification presents specific requirements for each manhole product in the following section:
Product | Section |
Grade Rings | 12 |
Manhole Structures | 13 |
Base Section | 14 |
Steps and Ladders | 15 |
1.4Steel sheet with zinc, aluminized or polymeric coating may be specified for the fabrication of the manhole structures. Manhole structures made from sheets with composite coatings are always furnished with an approved coating.
Note 1:Pipe fabricated with polymeric coated sheet may be used for sanitary sewers and industrial applications.
Note 2:This specification is a manufacturing specification and purchase specification only and does not include requirements for backfill, or the relationship between field load conditions.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM A 615/A615M : 2020 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
ASTM C 1619 : 2019 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
ASTM D 1056 : 2007 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
ASTM A 742/A742M : 2020 | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
ASTM A 760/A760M : 2015 : REDLINE | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
ASTM C 150/C150M : 2017-04 | SPECIFICATION FOR PORTLAND CEMENT |
ASTM A 929/A929M : 2017-03 | SPECIFICATION FOR STEEL SHEET, METALLIC-COATED BY THE HOT-DIP PROCESS FOR CORRUGATED STEEL PIPE |
ASTM C 39/C39M : 2021 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 595/C595M : 2021 | Standard Specification for Blended Hydraulic Cements |
ASTM B 695 : 2004 : R2016 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
ASTM D 1056 : 1968 : EDT 1 | Standard Specification for Sponge and Expanded Cellular Rubber Products |
ASTM D 1056 : 2000 | Standard Specification for Flexible Cellular Materials-Sponge or Expanded Rubber |
ASTM C 595/C595M : 2020 | Standard Specification for Blended Hydraulic Cements |
ASTM A 615/A615M : 2022 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
ASTM A 929/A929M : 2018 | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
AASHTO T 249 : 2003 | METHOD OF TEST FOR HELICAL LOCK SEAM CORRUGATED PIPE |
ASTM C 150/C150M : 2021 | Standard Specification for Portland Cement |
ASTM C 39/C39M : 2020 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM B 695 : 2021 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
ASTM C 309 : 2011 : REDLINE | Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
ASTM C 618 : 2022 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM C 1619 : 2011 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
ASTM C 1619 : 2005 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
ASTM A 563 : 2015 | Standard Specification for Carbon and Alloy Steel Nuts |
ASTM D 1056 : 2014 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
ASTM D 1056 : 2014 : REDLINE | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
ASTM A 762/A762M : 2015 : REDLINE | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
AASHTO T 241 : 1995 | METHOD OF TEST FOR HELICAL CONTINUOUSLY WELDED SEAM CORRUGATED STEEL PIPE |
ASTM C 1619 : 2011 : R2017 | Standard Specification for Elastomeric Seals for Joining Concrete Structures |
ASTM C 618 : 2019 | Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete |
ASTM A 762/A762M : 2019 | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
ASTM C 497 : 1998 | Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile |
ASTM C 150/C150M : 2022 | Standard Specification for Portland Cement |
ASTM A 929/A929M : 1997 | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
ASTM A 760/A760M : 2015 : R2020 | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.