• There are no items in your cart

ASTM A 563 : 2015 : REDLINE

Current

Current

The latest, up-to-date edition.

Standard Specification for Carbon and Alloy Steel Nuts

Available format(s)

PDF

Language(s)

English

Published date

01-07-2015

CONTAINED IN VOL. 01.08, 2017 Defines chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts.

1.1This specification2 covers chemical and mechanical requirements for eight grades of carbon and alloy steel nuts for general structural and mechanical uses on bolts, studs, and other externally threaded parts.

Note 1:See Appendix X1 for guidance on suitable application of nut grades.

1.2The requirements for any grade of nut may, at the supplier's option, and with notice to the purchaser, be fulfilled by furnishing nuts of one of the stronger grades specified herein unless such substitution is barred in the inquiry and purchase order.

1.3Grades C3 and DH3 nuts have atmospheric corrosion resistance and weathering characteristics comparable to that of the steels covered in Specifications A242/A242M, A588/A588M, and A709/A709M. The atmospheric corrosion resistance of these steels is substantially better than that of carbon steel with or without copper addition (see 5.2). When properly exposed to the atmosphere, these steels can be used bare (uncoated) for many applications.

Note 2:A complete metric companion to Specification A563 has been developed—A563M; therefore, no metric equivalents are presented in this specification.

1.4Terms used in this specification are defined in Terminology F1789 unless otherwise defined herein.

Committee
F 16
DocumentType
Redline
Pages
11
PublisherName
American Society for Testing and Materials
Status
Current

C83-17 COMMUNICATION AND POWER LINE HARDWARE
API SPEC 12D : 2017 SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS
ASTM F 1018 : 1987 : REV A : R2010 Standard Specification for Steel Emergency Gear Stowage Locker
ISO 6182-12:2014 Fire protection Automatic sprinkler systems Part 12: Requirements and test methods for grooved-end components for steel pipe systems
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
BS EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements
ASTM B 695 : 2004 : R2009 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM B 695 : 2004 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
IFI 144 : 2000 : R2013 TEST EVALUATION PROCEDURES FOR COATING QUALIFICATION INTENDED FOR USE ON HIGH-STRENGTH STRUCTURAL BOLTS
IFI 143 : 2002 : R2013 TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP ON BOTH EXTERNALLY AND INTERNALLY THREADED FASTENERS
AASHTO M 314 : 1990 SPECIFICATION FOR STEEL ANCHOR BOLTS
CSA Z662.1 : 2013 COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
AISC 348 : 2004 SPECIFICATION FOR STRUCTURAL JOINTS USING HIGH-STRENGTH BOLTS
AISC 350 : 99 ERRATA 2001 LOAD AND RESISTANCE FACTOR DESIGN SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
ASTM F 1073 : 1987 : R2012 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
ASTM F 1476 : 2007 : R2013 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F 2798 : 2009 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM A 1105 : 2017 Standard Specification for Corrugated Steel Manhole Assemblies
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 1018 : 1987 : REV A : R2017 Standard Specification for Steel Emergency Gear Stowage Locker
ASTM F 3125 : 2015 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions
ASTM F 1718 : 2001 : R2013 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 1476 : 2007 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F 2798 : 2009 : R2018 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
DIN EN 13411-5:2009-02 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
NACE 02107 : 0 COATINGS FOR PROTECTION OF THREADED FASTENERS USED WITH STRUCTURAL STEEL, PIPING, AND EQUIPMENT
ASTM F 2329/F2329M : 2015 : REDLINE Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM A 760/A760M : 2015 : REDLINE Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
MIL C 18295 : E CHAIN AND FITTINGS FOR FLEET MOORINGS
AASHTO LRFDLTS 1 : 1900 LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS
CSA S136-12 PACKAGE : 2012 CONSISTS OF S136-12 - NORTH AMERICAN SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS AND S136.1-12 - COMMENTARY ON NORTH AMERICAN SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS
MIL-DTL-62015 Revision G:1995 CARRIER, CARGO, FULL-TRACKED, M548A1 AND M548A3 - PROCESSING FOR STORAGE AND SHIPMENT OF
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
ASCE/SEI 10 15 : 2015 DESIGN OF LATTICED STEEL TRANSMISSION STRUCTURES
ASCE 48 05 : 2006 DESIGN OF STEEL TRANSMISSION POLE STRUCTURES
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
IFI 160 : 2007 TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS - INCH SERIES
ACI 301 : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
AISC 303 : 0 CODE OF STANDARD PRACTICE FOR STRUCTURAL STEEL BUILDINGS AND BRIDGES
ASTM F 1073 : 1987 : R1999 Standard Specification for Door Fittings, for Watertight/Gastight/Airtight, Weathertight, and Non-Tight Doors, for Marine Use
ASTM A 978/A978M : 2008 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
ASTM F 2798 : 2009 : R2014 : EDT 1 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM A 394 : 2008 : R2015 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM F 1510 : 2007 : R2013 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM F 1155 : 2010 Standard Practice for Selection and Application of Piping System Materials
ASTM A 449 : 2014 : REDLINE Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASTM A 1042/A1042M : 2004 : R2009 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains (Withdrawn 2015)
ASTM F 1155 : 2010 : R2015 Standard Practice for Selection and Application of Piping System Materials
DIN EN 13411-5 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
I.S. EN ISO 10440-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
I.S. EN 13411-5:2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
NEMA TT 1 : 1983 TAPERED TUBULAR STEEL STRUCTURES,
ASME B31.3:2016 PROCESS PIPING
WW-P-405 Revision B:1974 PIPE, CORRUGATED (IRON OR STEEL, ZINC COATED)
10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
ASTM F 1554 : 2018 : REDLINE Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
16/30328642 DC : 0 BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 12: REQUIREMENTS AND TEST METHODS FOR GROOVED-END COMPONENTS FOR STEEL PIPE SYSTEMS
04/30114086 DC : DRAFT JUL 2004 EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
ASTM A 385/A385M : 2017 : REDLINE Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
IEEE 1630-2012 IEEE Standard for Supporting Structures for Overhead Contact Systems for Transit Systems
CSA M430 : 1990 : R2011 ROOF AND ROCK BOLTS, AND ACCESSORIES
IFI 144 : 2000 TEST EVALUATION PROCEDURES FOR COATING QUALIFICATION INTENDED FOR USE ON HIGH-STRENGTH STRUCTURAL BOLTS
ASTM F 2437/F2437M : 2017 : REDLINE Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
ANSI/AWWA D103 : 2009 FACTORY-COATED BOLTED CARBON STEEL TANKS FOR WATER STORAGE
CSA M430 : 1990 : R2016 ROOF AND ROCK BOLTS, AND ACCESSORIES
ASTM A 1019/A1019M : 2001 Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains
ASTM F 1475 : 1993 Specification for Dispensing Tanks, 250 Liter Maximum (Withdrawn 1998)
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASTM F 1718 : 2001 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
I.S. EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
CSA G401 : 2014 CORRUGATED STEEL PIPE PRODUCTS
ASTM F 1018 : 1987 : REV A : R1999 : EDT 1 Standard Specification for Steel Emergency Gear Stowage Locker
ASTM A 1019/A1019M : 2001 : R2007 Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains (Withdrawn 2012)
ASTM F 1018 : 1987 : REV A : R2004 Standard Specification for Steel Emergency Gear Stowage Locker
ASTM A 978/A978M : 2008 : R2013 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications (Withdrawn 2020)
ASTM F 1718 : 2001 : R2006 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM B 695 : 2004 : R2016 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM F 2363/F2363M : 2017 : REDLINE Standard Specification for Sewage and Graywater Flow Through Treatment Systems
UNI EN 13411-5 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
UNI EN ISO 10440-1 : 2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
ASTM A 761/A761M : 2017-02 SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
MIL-B-29194 Revision B:1994 BUILDING ADDITION, PREFABRICATED, READY-CUT, METAL RIGID FRAME, FOR 40- BY 100-FOOT BUILDING
ASTM A 394 : 2008 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM A 762/A762M : 2015 : REDLINE Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
IFI 525 : 2007 TEST PROCEDURE FOR THE PERFORMANCE OF METRIC ADHESIVE COATED PREVAILING-TORQUE SCREWS
ASTM A 394 : 2008 : EDT 1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
CSA M430 : 1990 : R2007 ROOF AND ROCK BOLTS, AND ACCESSORIES
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASTM A 1042/A1042M : 2004 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains
CSA B242 : 2005 GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
AWWA C230 : 2016 STAINLESS-STEEL FULL-ENCIRCLEMENT REPAIR AND SERVICE CONNECTION CLAMPS FOR 2-IN. THROUGH 12-IN. (50-MM THROUGH 300-MM) PIPE
ACI 301M : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
ASTM F 1510 : 2007 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
CSA S16 : 2014 DESIGN OF STEEL STRUCTURES
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
BS EN 13411-5 : 2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
AISC 335 : 89 SUPP 1 1999 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS - ALLOWABLE STRESS DESIGN, PLASTIC DESIGN
AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
MIL-STD-2193 Revision C:2012 Ship Hydraulic System Components
API SPEC 12P : 2016 SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASCE 10-97 : 2000 DESIGN OF LATTICED STEEL TRANSMISSION STRUCTURES
AWWA C207 : 2013 STEEL PIPE FLANGES FOR WATERWORKS SERVICE, SIZES 4 IN. THROUGH 144 IN. (100 MM THROUGH 3,600 MM)
CSA B242 : 2005 : R2016 GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS
SAE J 2485 : 2012 FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH)
IFI 143 : 2002 TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP ON BOTH EXTERNALLY AND INTERNALLY THREADED FASTENERS
API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
AASHTO M 167M/M 167 : 2014 SPECIFICATION FOR CORRUGATED STEEL STRUCTURAL PLATE, ZINC-COATED, FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
SAE J 2295 : 2016 FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED)
ASTM F 1073 : 1987 : R2007 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
ASTM F 432 : 2013 : REDLINE Standard Specification for Roof and Rock Bolts and Accessories
ASCE/SEI 48 11 : 2011 DESIGN OF STEEL TRANSMISSION POLE STRUCTURES
ASTM B 745/B745M : 2015 : REDLINE Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ASTM B 746/B746M : 2016 : REDLINE Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASME A112.6.4 : 2003 : R2008 ROOF, DECK, AND BALCONY DRAINS
ASME A112.6.4 : 2003 : R2012 ROOF, DECK, AND BALCONY DRAINS
ASME A112.6.3 : 2016 FLOOR AND TRENCH DRAINS
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
ASME B31.3 SPANISH : 2010 PROCESS PIPING
ASME A112.6.4 : 2003 ROOF, DECK, AND BALCONY DRAINS
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
NBR 14243 : 1998 JUNTAS DE FERRO FUNDIDO DUCTIL TIPO "GIBAULT" - REQUISITOS

ASTM A 687 : 1993 Standard Specification for High-Strength Nonheaded Steel Bolts and Studs (Withdrawn 1999)
ASTM A 449 : 2014 : REDLINE Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASME B18.2.2 : 2015 NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES)
ASTM A 588/A588M : 2015 : REDLINE Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

View more information
€69.98
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.