ASTM B 214 : 2016 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Sieve Analysis of Metal Powders
Available format(s)
PDF
Superseded date
10-09-2022
Superseded by
Language(s)
English
Published date
29-04-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 02.05, 2017 Explains the dry sieve analysis of metal powders or mixed powders, using sieves with openings ranging from 45 to 1000 micrometers.
| Committee |
B 09
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1This test method covers the dry sieve analysis of metal powders, using sieves with openings ranging from 45 to 850 micrometres.
1.2This test method is based on a particular type of mechanical sieve shaker (see 5.2). Other types of sieve shakers are also available, but their precision and reproducibility have not been determined.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| SAE AMS 5792 : 2012 | POWDER, PLASMA SPRAY, 50 (88WC - 12CO) + 35 (70NI - 16.5CR - 4FE - 4SI - 3.8B) + 15 (80NI - 20AL), THREE-COMPONENT MIXTURE |
| MIL-I-82819 Base Document:1986 | INSULATION, THERMAL, POLYISOPRENE, SILICA & ASBESTOS FILLED |
| SAE AMS4784G:2012(R2018) | GOLD-PALLADIUM-NICKEL ALLOY, BRAZING FILLER METAL, HIGH TEMPERATURE, 50AU - 25PD - 25NI, 2015 TO 2050 DEGREES F (1102 TO 1121 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 3430 : 2014 | BRAZING FILLER METAL, PASTE, COPPER, WATER THINNING |
| SAE AMS 4770 : 2015 | Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range |
| AWS A5.13 : 2000 | SOLID SURFACING WELDING RODS AND ELECTRODES, SPECIFICATION FOR, |
| MIL-A-82832 Base Document:1986 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING |
| MIL-M-48245 Revision B:1988 | MOLDING COMPOUND, HOUSING |
| SAE AMS 4774 : 2015 | SILVER ALLOY BRAZING FILLER METAL 63AG - 28.5CU - 6.0SN - 2.5NI 1275 TO 1475 DEGREES F (691 TO 802 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| MIL-Z-81572 Base Document:1968 | Zirconium Oxide, Lime-Stabilized, Powder and Rod, for Flame Spraying |
| SAE AMS 2453 : 2015 | LOW STRESS GRINDING OF STEEL PARTS HEAT TREATED TO 180 KSI OR OVER, AND LOW STRESS GRINDING OF CHROME PLATING APPLIED TO STEEL PARTS HEAT TREATED TO 180 KSI OR OVER |
| AWS A5.21/A5.21M:2011 | SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING |
| ASTM D 520 : 2000 | Standard Specification for Zinc Dust Pigment |
| AWS A5.13/A5.13M : 2010 | SPECIFICATION FOR SURFACING ELECTRODES FOR SHIELDED METAL ARC WELDING |
| AWS A5.21 : 2001 | SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING |
| I.S. EN ISO 14232-1:2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| SAE AMS 4788 : 2015 | SILVER ALLOY BRAZING FILLER METAL, 50AG - 28ZN - 20CU - 2.0NI, 1220 TO 1305 DEGREES F (660 TO 707 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| ASTM F 106 : 2012 : R2017 | Standard Specification for Brazing Filler Metals for Electron Devices (Withdrawn 2024) |
| EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| SAE AMS 4998 : 2013 | TITANIUM ALLOY POWDER, 6Al - 4V |
| ASTM C 699 : 1979 | Method for Chemical, Mass Spectrometric, and Spectrochemical Analysis of, and Physical Tests on Beryllium Oxide Powder (Withdrawn 1992) |
| MIL-DTL-512 Revision C:2001 | Aluminum Powder, Flaked, Grained, and Atomized |
| 16/30301923 DC : 0 | BS EN ISO 14232-1 - THERMAL SPRAYING - POWDERS - PART 1: CHARACTERISATION AND TECHNICAL SUPPLY CONDITIONS |
| BS EN ISO 14232-1:2017 | Thermal spraying. Powders Characterization and technical supply conditions |
| SAE AMS 7875 : 2017 | POWDER, CHROMIUM CARBIDE PLUS NICKEL-CHROMIUM ALLOY, 75CR[2]C[3] + 25 (80NI - 20CR ALLOY) |
| MIL-P-62426 Base Document:1991 | POWDER, CHROMIUM CARBIDE - NICKEL CHROMIUM ALLOY (METRIC) |
| SAE AMS 3420 : 2016 | DEHYDRATING AGENT, SILICA GEL |
| SAE AMS 4997 : 1977 | TITANIUM ALLOY POWDER 5AL - 2SN - 2ZR - 4CR - 4MO - 0.100 PREMIUM QUALITY |
| SAE AMS 4769 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 45AG - 24CD - 16ZN - 15CU, 1125 TO 1145 DEGREES F (607 TO 618 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AS 7101 : 2007 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM |
| SAE AMS4785J:2015 | GOLD-PALLADIUM-NICKEL ALLOY, BRAZING FILLER METAL, HIGH TEMPERATURE, 30AU - 34PD - 36NI, 2075 TO 2130 DEGREES F (1135 TO 1166 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| AWS A5.8/A5.8M : 2013 | SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING |
| SAE AMS 4783 : 2014 | COBALT ALLOY, HIGH TEMPERATURE BRAZING FILLER METAL, 50CO - 8.0SI - 19CR - 17NI - 4.0W - 0.80B, 2050 TO 2100 DEGREES F (1121 TO 1149 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 4768 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 35AG - 26CU - 21ZN - 18CD, 1125 TO 1295 DEGREES F (607 TO 702 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 4740 : 2012 | COPPER POWDER 99.0 CU, MINIMUM AS FABRICATED |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| SAE MAM 4778 : 2003 | NICKEL ALLOY, BRAZING FILLER METAL, 92NI - 4.5SI - 3.1B, 980 TO 1040 DEGREE C SOLIDUS-LIQUIDUS RANGE |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| SAE AMS 4766 : 2015 | SILVER ALLOY, BRAZING FILLER METAL 85AG - 15MN 1760 TO 1780 DEGREES F (960 TO 971 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| ASTM D 521 : 2002 : R2012 | Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| SAE AMS 5793 : 2012 | POWDER, PLASMA SPRAY, 95NI - 5AL |
| ASTM F 3049 : 2014 | Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes |
| SAE AMS 4786 : 2015 | GOLD-PALLADIUM-NICKEL ALLOY, BRAZING FILLER METAL, HIGH TEMPERATURE, 70AU - 8.0PD - 22NI, 1845 TO 1915 DEGREES F (1007 TO 1046 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| AWS TSS : 1985 | THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION |
| NASA MSFC SPEC 3706 : 2016 | SPECIFICATION FOR 60NI-40TI BILLETS |
| DIN EN ISO 14232-1 E : 2017 | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| MIL-P-62423 Base Document:1982 | POWDER, POLYESTER-ALUMINUM (METRIC) |
| MIL-P-83348 Revision A:1983 | POWDER, PLASMA SPRAY |
| MIL-P-85856 Base Document:1988 | POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS GENERAL SPECIFICATION FOR |
| MIL-P-62424 Base Document:1982 | POWDER, YTTRIUM, ALUMINUM, NICKEL-CHROMIUM (METRIC) |
| MIL-A-82836 Base Document:1987 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS |
| SAE AMS 4778 : 2013 | NICKEL ALLOY, BRAZING FILLER METAL, 92NI - 4.5SI - 3.1B, 1800 TO 1900 DEGREES F SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 4773 : 2016 | SILVER ALLOY, BRAZING FILLER METAL, 60AG - 30CU - 10SN, 1115 TO 1325 DEGREES F (602 TO 718 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| ASTM F 1377 : 2013 : REDLINE | Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075) |
| ASTM F 3187 : 2016 | Standard Guide for Directed Energy Deposition of Metals |
| DIN EN ISO 14232-1:2016-02 (Draft) | THERMAL SPRAYING - POWDERS - PART 1: CHARACTERIZATION AND TECHNICAL SUPPLY CONDITIONS (ISO 14232-1:2017) |
| SAE AMS 2430 : 2015 | SHOT PEENING |
| SAE AMS 3040 : 2014 | MAGNETIC PARTICLES, NONFLUORESCENT, DRY METHOD |
| QQ-B-650 Revision C:1987 | BRAZING ALLOYS, COPPER, COPPER ZINC, AND COPPER PHOSPHORUS |
| MIL-U-70457 Base Document:1983 | Uranium Tetrafluoride (UF4), Depleted |
| SAE AMS 7879 : 2013 | TUNGSTEN CARBIDE-COBALT POWDER |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| MIL-DTL-32495 Base Document:2014 | ALUMINUM-BASED POWDERS FOR COLD SPRAY DEPOSITION |
| SAE AMS 4762 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 40AG - 30CU - 30ZN, 1245 TO 1340 DEGREE F (674 TO 727 DEGREE C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 4771 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 50AG - 16CD - 15.5ZN - 15.5CU - 3.0NI, 1170 TO 1270 DEGREES F (632 TO 688 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 2449 : 2010 | GRINDING OF HVOF SPRAYED TUNGSTEN CARBIDE COATINGS APPLIED TO HIGH STRENGTH STEELS |
| SAE AMS 4764 : 2013 | COPPER ALLOY, BRAZING FILLER METAL 52.5CU - 38MN - 9.5NI 1615 TO 1700 DEGREES F (879 TO 927 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 2431 : 2018 | PEENING MEDIA, GENERAL REQUIREMENTS |
| SAE AMS 4765 : 2015 | SILVER ALLOY, BRAZING FILLER METAL 56AG - 42CU - 2.0NI 1420 TO 1640 DEGREES F (771 TO 893 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 7878 : 1987 | TUNGSTEN CARBIDE POWDER, COBALT COATED |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| NASA MSFC SPEC 3717 : 2017 | SPECIFICATION FOR CONTROL AND QUALIFICATION OF LASER POWDER BED FUSION METALLURGICAL PROCESSES |
| SAE AMS 4763 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 56AG - 22CU - 17ZN - 5.0SN, 1145 TO 1205 DEGREES F (618 TO 652 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| ASTM F 106 : 2012 | Standard Specification for Brazing Filler Metals for Electron Devices |
| ASTM F 3001 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion |
| ISO 14232-1:2017 | Thermal spraying — Powders — Part 1: Characterization and technical supply conditions |
| SAE AMS 4767 : 2015 | SILVER ALLOY, BRAZING FILLER METAL 92.5AG - 7.2CU - 0.22LI 1435 TO 1635 DEGREES F (779 TO 891 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| MIL A 512 : A | ALUMINUM POWDER, FLAKED, GRAINED AND ATOMIZED |
| MIL-P-62680 Base Document:1992 | POWDER, NICKEL-CHROMIUM/ALUMINUM COMPOSITE (METRIC) |
| SAE AMS 4780 : 2012 | MANGANESE ALLOY, BRAZING FILLER METAL 66MN - 16NI - 16CO - 0.80B, 1770 TO 1875 F (966 TO 1024 C) SOLIDUS-LIQUIDUS RANGE |
| MIL-R-17131 Revision C:1981 | RODS AND POWDERS, WELDING, SURFACING |
| MIL-A-82728 Base Document:1984 | ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES) |
| UNE-EN ISO 14232-1:2017 | Thermal spraying - Powders - Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) |
| SAE AMS 4772 : 2015 | SILVER ALLOY, BRAZING FILLER METAL, 54AG - 40CU - 5.0ZN - 1.0NI, 1325 TO 1575 DEGREES F (718 TO 857 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| SAE AMS 4787 : 2017 | GOLD-NICKEL ALLOY, BRAZING FILLER METAL, HIGH TEMPERATURE, 82AU - 18NI, 1740 DEGREES F (949 DEGREES C) SOLIDUS-LIQUIDUS TEMPERATURE |
| SAE AMS 5791 : 2015 | COBALT ALLOY, POWDER, PLASMA SPRAY, 56.5CO - 25.5CR - 10.5NI - 7.5W |
| SAE AMS 7001 : 2018 | NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, POWDER FOR ADDITIVE MANUFACTURING, 62NI - 21.5CR - 9.0MO - 3.65NB |
| SAE AMS 4761 : 2015 | SILVER ALLOY, BRAZING FILLER METAL 38AG - 32CU - 28ZN - 2.0SN 1200 TO 1330 DEGREES F (649 TO 721 DEGREES C) SOLIDUS-LIQUIDUS RANGE |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| ASTM D 521 : 2002 | Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ASTM D 520 : 2000 : R2005 | Standard Specification for Zinc Dust Pigment |
| ASTM D 520 : 2000 : R2011 | Standard Specification for Zinc Dust Pigment |
| ASTM D 521 : 2002 : R2007 | Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder) |
| ASTM B 212 : 2017 : REDLINE | Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel |
| ASTM B 215 : 2015 : REDLINE | Standard Practices for Sampling Metal Powders |
| ASTM B 703 : 2017 | Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.