ASTM B 248 : 2022
Current
The latest, up-to-date edition.
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
Hardcopy , PDF
English
23-05-2022
Committee |
B 05
|
DocumentType |
Standard
|
Pages |
13
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification establishes the general requirements common to several wrought product specifications. Unless otherwise specified in the purchase order or in an individual specification, these general requirements shall apply to copper and copper-alloy plate, sheet, strip, and rolled bar supplied under each of the following product specifications issued by ASTM: B19, B36/B36M, B96/B96M, B101, B103/B103M, B121/B121M, B122/B122M, B130, B152/B152M, B169/B169M, B194, B370, B422/B422M, B465, B534, B591, B592, B694, B740, B747, B768, B888/B888M, and B936.2
1.2Units—This specification is the companion specification to SI Specification B248M; therefore, no SI equivalents are shown in this specification.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 171/B171M : 2018 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers |
ASTM B 36/B36M : 2018 | Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar |
ASTM B 936 : 2019 | Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar |
ASTM B 694 : 2019 | Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding |
ASTM B 103/B103M : 2019 | Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar |
ASTM B 888/B888M : 2019 | Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts |
ASTM B 152/B152M : 2019 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
ASTM A 466/A466M : 2007 : R2020 | Standard Specification for Weldless Chain |
ASTM B 100 : 2020 | Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use |
ASTM B 747 : 2020 | Standard Specification for Copper-Zirconium Alloy Sheet and Strip |
ASTM B 592 : 2020 | Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 534 : 2020 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 169/B169M : 2020 | Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar |
ASTM B 19 : 2020 | Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
ASTM B 272 : 2012 : R2019 | Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip) |
ASTM B 882 : 2010 : R2018 | Standard Specification for Pre-Patinated Copper for Architectural Applications |
ASTM B 591 : 2020 : REV A | Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar |
ASTM B 465 : 2020 | Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 96/B96M : 2020 | Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels |
ASTM B 122/B122M : 2020 | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 950 : 2021 : EDT 1 | Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys |
ASTM B 740 : 2021 | Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip |
ASTM B 768 : 2022 | Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet |
ASTM B 194 : 2015 | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 121/B121M : 2016 | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
ASTM B 422/B422M : 2017 | Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip |
ASTM F 3166 : 2016 | Standard Specification for High-Purity Titanium Sputtering Target Used for Through-Silicon Vias (TSV) Metallization (Withdrawn 2023) |
ASTM F 3192 : 2016 | Standard Specification for High-Purity Copper Sputtering Target Used for Through-Silicon Vias (TSV) Mettalization (Withdrawn 2023) |
ASTM B 101 : 2022 | Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction |
ASTM B 248M : 2022 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric) |
ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM E 1004 : 2023 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 255 : 2023 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
ASTM B 846 : 2019 : REV A | Standard Terminology for Copper and Copper Alloys |
ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM E 478 : 2024 | Standard Test Methods for Chemical Analysis of Copper Alloys |
ASTM B 194 : 2022 | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM B 936 : 2023 | Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar |
ASTM B 846 : 2024 | Standard Terminology for Copper and Copper Alloys |
ASTM E 527 : 2023 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
ASTM B 152/B152M : 2024 | Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
ASTM E 527 : 2016 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
ASTM B 36/B36M : 2023 | Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar |
ASTM B 888/B888M : 2024 | Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts |
ASTM E 1004 : 2017 | Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method |
ASTM B 820 : 2023 | Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip |
ASTM B 422/B422M : 2022 | Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip |
ASTM B 121/B121M : 2023 | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
ASTM B 130 : 2024 | Standard Specification for Commercial Bronze Strip for Bullet Jackets |
ASTM E 50 : 2017 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
ASTM E 18 : 2019 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM E 478 : 2008 : R2017 | Standard Test Methods for Chemical Analysis of Copper Alloys |
ASTM B 422/B422M : 2017 | Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip |
ASTM B 820 : 2018 | Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip |
ASTM E 50 : 2024 | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
ASTM B 130 : 2019 | Standard Specification for Commercial Bronze Strip for Bullet Jackets |
ASTM B 103/B103M : 2023 | Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar |
ASTM E 112 : 2013 : R2021 | Standard Test Methods for Determining Average Grain Size |
ASTM E 255 : 2007 : R2014 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition (Withdrawn 2023) |
ASTM B 194 : 2015 | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
ASTM E 112 : 2024 | Standard Test Methods for Determining Average Grain Size |
ASTM B 370 : 2022 | Standard Specification for Copper Sheet and Strip for Building Construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.