ASTM C 1077 : 2017 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
17-01-2024
English
12-10-2017
CONTAINED IN VOL. 04.05, 2017 Specifies and defines the duties, responsibilities, and minimum technical requirements of testing agency personnel and the minimum technical requirements for equipment utilized in testing concrete and concrete aggregates for use in construction.
Committee |
C 09
|
DocumentType |
Redline
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This practice identifies and defines the duties, responsibilities, and minimum technical requirements of testing agency personnel and the minimum technical requirements for equipment utilized in testing concrete and concrete aggregates for use in construction.
1.2This practice provides criteria for the evaluation of the capability of a testing agency to perform designated ASTM test methods on concrete and concrete aggregates. It can be used by an evaluation authority in the inspection or accreditation of a testing agency or by other parties to determine if the agency is qualified to conduct the specified tests.
Note 1:Specification E329 provides criteria for the evaluation of agencies that perform the inspection of concrete during placement.
1.3This practice provides criteria for Inspection Bodies and Accreditation Bodies that provide services for evaluation of testing agencies in accordance with this practice.
1.4The text of this standard references notes and footnotes, which provide explanatory material and shall not be considered as requirements of this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ACI 330R : 2008 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
ACI PRC-363.2 : 2011 | GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE |
ANSI/AWWA D107-16 ERR 1(CSV) | COMPOSITE ELEVATED TANKS FOR WATER STORAGE |
ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
ASTM C 1116/C1116M : 2010 : REV A : R2015 | Standard Specification for Fiber-Reinforced Concrete |
ASTM C 470/C470M : 2015 : REDLINE | Standard Specification for Molds for Forming Concrete Test Cylinders Vertically |
ASTM C 31/C31M : 2018-02 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE FIELD |
ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
ACI 207.5R : 2011 | REPORT ON ROLLER-COMPACTED MASS CONCRETE |
ASTM D 3740 : 2012-06 | PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION |
ACI 301 : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
ACI 349.3R : 2018 | REPORT ON EVALUATION AND REPAIR OF EXISTING NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES |
ASTM C 78/C78M : 2018 : REDLINE | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
ASTM C 1116/C1116M : 2010 | Standard Specification for Fiber-Reinforced Concrete |
ACI 311.6 : 2009 | SPECIFICATION FOR READY MIXED CONCRETE TESTING SERVICES |
NACE SP 03 08 : 2008(R2018) | INSPECTION METHODS FOR CORROSION EVALUATION OF CONVENTIONALLY REINFORCED CONCRETE STRUCTURES |
ACI 301M : 2016 | SPECIFICATIONS FOR STRUCTURAL CONCRETE |
ACI 423.7 : 2014 | SPECIFICATION FOR UNBONDED SINGLE-STRAND TENDON MATERIALS |
ACI 311.4R : 2005 | GUIDE FOR CONCRETE INSPECTION |
ACI 350M : 2006 | METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
ACI 350 : 2006 | CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
ACI 318M : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
ACI PRC-506 : 2016 | GUIDE TO SHOTCRETE |
ACI 311.6M : 2009 | SPECIFICATION FOR READY MIXED CONCRETE TESTING SERVICES |
ACI ITG-8R : 2010 | REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
ACI 350.5 : 2012 | SPECIFICATIONS FOR ENVIRONMENTAL CONCRETE STRUCTURES |
ACI 506.2M : 2013 | SPECIFICATION FOR SHOTCRETE [METRIC] |
ASTM C 1116/C1116M : 2010 : REV A | Standard Specification for Fiber-Reinforced Concrete |
ACI 311.5R : 2004 | GUIDE FOR CONCRETE PLANT INSPECTION AND TESTING OF READY-MIXED CONCRETE |
ASTM C 685/C685M : 2017 : REDLINE | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
ACI 308.1 : 2011 | SPECIFICATION FOR CURING CONCRETE |
ASTM C 39/C39M : 2018 : REDLINE | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM E 329 : 2018 : REDLINE | Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection |
ACI 308.1M : 2011 | SPECIFICATION FOR CURING CONCRETE |
ACI 303.1 : 1997 | STANDARD SPECIFICATION FOR CAST-IN-PLACE ARCHITECTURAL CONCRETE |
ASTM C 1800/C1800M : 2016 | Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor |
ACI 330.2R:2017(R2023) | Guide for the Design and Construction of Concrete Site Paving for Industrial and Trucking Facilities |
ACI 214 : 1977(R1989) | EVALUATION OF STRENGTH TEST RESULTS OF CONCRETE |
ASTM C 617/C617M : 2015 : REDLINE | Standard Practice for Capping Cylindrical Concrete Specimens |
ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
ASTM C 802 : 2014 : REDLINE | Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
ISO/IEC 17011:2004 | Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
ASTM C 1231/C1231M : 2015 : REDLINE | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens |
ASTM C 136/C136M : 2014 : REDLINE | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM C 173/C173M : 2016 : REDLINE | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
ASTM C 172/C172M : 2017 : REDLINE | Standard Practice for Sampling Freshly Mixed Concrete |
ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
ASTM D 2419 : 2014 : REDLINE | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
ASTM C 1064/C1064M : 2017 : REDLINE | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
ASTM D 75/D75M : 2014 : REDLINE | Standard Practice for Sampling Aggregates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.