|
ACI 522R : 2010
|
REPORT ON PERVIOUS CONCRETE |
|
ACI 439.4R : 2009 : R2017
|
REPORT ON STEEL REINFORCEMENT - MATERIAL PROPERTIES AND U.S. AVAILABILITY |
|
ACI 336.1 : 2001
|
REFERENCE SPECIFICATION FOR THE CONSTRUCTION OF DRILLED PIERS AND COMMENTARY |
|
NACE 6 : 2003
|
SURFACE PREPARATION OF CONCRETE |
|
AASHTO GFRP 1 : 0
|
LRFD BRIDGE DESIGN GUIDE SPECIFICATIONS FOR GFRP-REINFORCED CONCRETE BRIDGE DECKS AND TRAFFIC RAILINGS |
|
ASTM D 5295 : 2000
|
Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
|
ACI 315R : 2018
|
GUIDE TO PRESENTING REINFORCING STEEL DESIGN DETAILS |
|
ACI 376 : 2011
|
CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY |
|
ACI 439.3R : 2007
|
TYPES OF MECHANICAL SPLICES FOR REINFORCING BARS |
|
ACI 440.5 : 2008
|
SPECIFICATION FOR CONSTRUCTION WITH FIBER-REINFORCED POLYMER REINFORCING BARS |
|
ACI SP 4 : 2014
|
FORMWORK FOR CONCRETE |
|
ACI 330.1R : 2003
|
SPECIFICATION FOR UNREINFORCED CONCRETE PARKING LOTS |
|
ACI 211.1 : 1991
|
SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE |
|
ANSI/AWWA D110:2013(R2018)
|
WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS |
|
ASTM F 2551 : 2009
|
Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes |
|
ASTM C 898 : 2001
|
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course |
|
ASTM C 898/C898M : 2009
|
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course |
|
ASTM D 6950/D6950M : 2004 : R2012 : EDT 1
|
Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks (Withdrawn 2015) |
|
UFC 3-430-02FA : Change 1
|
UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS |
|
FC 4-211-03F : 2016
|
FACILITIES CRITERIA - AIR FORCE FIGHTER ENGINE MAINTENANCE FACILITY |
|
ANS 57.7 : 88(R1997)
|
DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE) |
|
FC 4-721-02F : 2015
|
FACILITIES CRITERIA - AIR FORCE LEVEL 1 CONFINEMENT FACILITY |
|
PIP STS02465 : 2012
|
AUGERED CAST-IN-PLACE PILES INSTALLATION SPECIFICATION |
|
NACE SP 01 87 : 2017
|
DESIGN FOR CORROSION CONTROL OF REINFORCING STEEL IN CONCRETE |
|
ACI 211.3R : 2002
|
GUIDE FOR SELECTING PROPORTIONS FOR NO-SLUMP CONCRETE |
|
ACI ITG-4.1 : 2007
|
SPECIFICATION FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
|
ACI 544.3R : 2008
|
GUIDE FOR SPECIFYING, PROPORTIONING, AND PRODUCTION OF FIBER-REINFORCED CONCRETE |
|
ACI 336.1R : 2017
|
SPECIFICATIONS FOR THE CONSTRUCTION OF DRILLED PIERS |
|
ACI 350.2R : 2004
|
CONCRETE STRUCTURES FOR CONTAINMENT OF HAZARDOUS MATERIALS |
|
ACI 305R : 2010
|
GUIDE TO HOT WEATHER CONCRETING |
|
ACI 304.5R : 91(R1997)
|
BATCHING, MIXING, AND JOB CONTROL OF LIGHTWEIGHT CONCRETE |
|
ASTM A 1055 : 2008
|
Standard Specification for Zinc and Epoxy Dual Coated Steel Reinforcing Bars |
|
ASTM D 5295 : 2000 : R2006
|
Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
|
ACI 560R : 2016
|
REPORT ON DESIGN AND CONSTRUCTION WITH INSULATING CONCRETE FORMS (ICFS) |
|
ACI 228.1R : 2003
|
IN-PLACE METHODS TO ESTIMATE CONCRETE STRENGTH |
|
ANSI/AWWA D103 : 2009
|
FACTORY-COATED BOLTED CARBON STEEL TANKS FOR WATER STORAGE |
|
CTI ESG 123 : 2012
|
RECOMMENDED GUIDELINES FOR CONCRETE RESTORATION AND REPAIRS TO NATURAL AND MECHANICAL DRAFT COOLING TOWERS |
|
ACI 121 : 1985
|
QUALITY MANAGEMENT SYSTEM FOR CONCRETE CONSTRUCTION |
|
ACI 309R : 2005
|
GUIDE FOR CONSOLIDATION OF CONCRETE |
|
ACI 233R : 2017
|
GUIDE TO THE USE OF SLAG CEMENT IN CONCRETE AND MORTAR |
|
ACI 349.3R : 2018
|
REPORT ON EVALUATION AND REPAIR OF EXISTING NUCLEAR SAFETY-RELATED CONCRETE STRUCTURES |
|
ACI 371R : 2016
|
GUIDE FOR THE ANALYSIS, DESIGN, AND CONSTRUCTION OF ELEVATED CONCRETE AND COMPOSITE STEEL-CONCRETE WATER STORAGE TANKS |
|
ASTM C 898/C898M : 2009 : R2017
|
Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course |
|
ASTM D 7693/D7693M : 2015
|
Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks |
|
ASTM C 1804 : 2014 : EDT 1
|
Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
|
FC 4-179-03F : 2015
|
FACILITIES CRITERIA - AIR FORCE INDOOR SMALL ARMS FIRING RANGE |
|
ACI 237R : 2007
|
SELF-CONSOLIDATING CONCRETE |
|
ACI 306.1 : 1990
|
STANDARD SPECIFICATION FOR COLD WEATHER CONCRETING |
|
ACI 332.1R : 2006
|
GUIDE TO RESIDENTIAL CONCRETE CONSTRUCTION |
|
ACI ITG-4.2R : 2006
|
MATERIALS AND QUALITY CONSIDERATIONS FOR HIGH-STRENGTH CONCRETE IN MODERATE TO HIGH SEISMIC APPLICATIONS |
|
ASTM D 5295/D5295M : 2018 : REDLINE
|
Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems |
|
ASTM A 775/A775M : 2019 : REDLINE
|
Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
|
AWWA D121 : 2014
|
BOLTED ABOVEGROUND THERMOSETTING FIBERGLASS-REINFORCED PLASTIC PANEL-TYPE TANKS FOR WATER STORAGE |
|
ACI 362.1R : 2012
|
GUIDE FOR THE DESIGN AND CONSTRUCTION OF DURABLE CONCRETE PARKING STRUCTURES |
|
ACI 318 : 2014
|
BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
|
CSA S269.1 : 2016
|
FALSEWORK AND FORMWORK |
|
ACI 212.4R : 2004
|
GUIDE FOR THE USE OF HIGH-RANGE WATER-REDUCING ADMIXTURES (SUPERPLASTICIZERS) IN CONCRETE |
|
ASTM D 6950 : 2004
|
Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks |
|
ACI 376M : 2011
|
CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES (METRIC) |
|
ASTM C 981:2005
|
Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks |
|
CTI ESG 153 : 0
|
RECOMMENDED GUIDELINES FOR PORTLAND CEMENT CONCRETE FOR MECHANICAL DRAFT COOLING TOWERS |
|
ACI 423.3R : 2017
|
RECOMMENDATIONS FOR CONCRETE MEMBERS PRESTRESSED WITH SINGLE-STRAND UNBONDED TENDONS |
|
ACI 303.1 : 1997
|
STANDARD SPECIFICATION FOR CAST-IN-PLACE ARCHITECTURAL CONCRETE |
|
ACI 303R : 2012
|
GUIDE TO CAST-IN-PLACE ARCHITECTURAL CONCRETE PRACTICE |
|
ACI PRC-363.2 : 2011
|
GUIDE TO QUALITY CONTROL AND ASSURANCE OF HIGH-STRENGTH CONCRETE |
|
ACI 533R : 2011
|
GUIDE FOR PRECAST CONCRETE WALL PANELS |
|
ACI 347R : 2014
|
GUIDE TO FORMWORK FOR CONCRETE |
|
ACI 311.4R : 2005
|
GUIDE FOR CONCRETE INSPECTION |
|
ACI 350M : 2006
|
METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
|
ACI 350 : 2006
|
CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY |
|
ACI 351.2R : 2010
|
REPORT ON FOUNDATIONS FOR STATIC EQUIPMENT |
|
ACI PRC-506 : 2016
|
GUIDE TO SHOTCRETE |
|
ACI 222.3R : 2011
|
GUIDE TO DESIGN AND CONSTRUCTION PRACTICES TO MITIGATE CORROSION OF REINFORCEMENT IN CONCRETE STRUCTURES |
|
ACI 334.3R : 2005
|
CONSTRUCTION OF CONCRETE SHELLS USING INFLATED FORMS |
|
ACI E3 : 2013
|
CEMENTITIOUS MATERIALS FOR CONCRETE |
|
ACI 543R : 2012
|
GUIDE TO DESIGN, MANUFACTURE, AND INSTALLATION OF CONCRETE PILES |
|
ACI ITG-8R : 2010
|
REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
|
ACI 562 : 2016
|
CODE REQUIREMENTS FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES AND COMMENTARY |
|
ACI 506.2M : 2013
|
SPECIFICATION FOR SHOTCRETE [METRIC] |
|
ACI 223R : 2010
|
GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE |
|
ACI 213 : 1987(R1999)
|
GUIDE FOR STRUCTURAL LIGHTWEIGHT-AGGREGATE CONCRETE |
|
ACI 211.4R : 2008
|
GUIDE FOR SELECTING PROPORTIONS FOR HIGH-STRENGTH CONCRETE USING PORTLAND CEMENT AND OTHER CEMENTITIOUS MATERIALS |
|
ASTM A 1055/A1055M : 2016 : REDLINE
|
Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars |
|
ASTM F 2551 : 2009 : R2016
|
Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes |
|
CSA A23.1 A23.2 : 2014
|
CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
|
ACI 334.2R : 1991
|
REINFORCED CONCRETE COOLING TOWER SHELLS |
|
ACI 330R : 2008
|
GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
|
ASCE 9 91 : 1991
|
STANDARD PRACTICE FOR CONSTRUCTION AND INSPECTION OF COMPOSITE SLABS |
|
AISC 360 : 2016
|
SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
|
ACI 214R : 2011
|
GUIDE TO EVALUATION OF STRENGTH TEST RESULTS OF CONCRETE |
|
ACI 211.2 : 1998
|
SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
|
ACI 313 : 2016
|
DESIGN SPECIFICATION FOR CONCRETE SILOS AND STACKING TUBES FOR STORING GRANULAR MATERIALS AND COMMENTARY |
|
ACI 325.14R : 2017
|
GUIDE FOR DESIGN AND PROPORTIONING OF CONCRETE MIXTURES FOR PAVEMENTS |
|
ACI 365.1R : 2017
|
REPORT ON SERVICE LIFE PREDICTION |
|
NACE RP 03 95 : 0
|
FUSION-BONDED EPOXY COATING OF STEEL REINFORCING BARS |
|
ACI 555R : 2001
|
REMOVAL AND REUSE OF HARDENED CONCRETE |
|
ACI 311.5R : 2004
|
GUIDE FOR CONCRETE PLANT INSPECTION AND TESTING OF READY-MIXED CONCRETE |
|
ASCE 3 91 : 1994
|
STANDARD FOR THE STRUCTURAL DESIGN OF COMPOSITE SLABS |
|
ASTM C 1804 : 2014
|
Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
|
ASTM C 981 : 2005 : R2013
|
Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks |
|
ACI 522R : 2010(R2011)
|
REPORT ON PERVIOUS CONCRETE |
|
ACI 304.3R : 1996(R2004)
|
HEAVYWEIGHT CONCRETE: MEASURING, MIXING, TRANSPORTING, AND PLACING |
|
AWWA D100 : 2011
|
WELDED CARBON STEEL TANKS FOR WATER STORAGE |
|
ACI 363R : 2010
|
REPORT ON HIGH-STRENGTH CONCRETE |
|
ANS 51.1 : 83(R1988)
|
NUCLEAR SAFETY CRITERIA FOR THE DESIGN OF STATIONARY PRESSURIZED WATER REACTOR PLANTS |
|
NACE SP 03 95 : 2013
|
FUSION-BONDED EPOXY COATING OF STEEL REINFORCING BARS |
|
NACE RP 01 87 : 2005
|
DESIGN CONSIDERATIONS FOR CORROSION CONTROL OF REINFORCING STEEL IN CONCRETE |
|
ACI 314R : 2016
|
GUIDE TO SIMPLIFIED DESIGN FOR REINFORCED CONCRETE BUILDINGS |
|
ACI 304.3R : 1996
|
HEAVYWEIGHT CONCRETE: MEASURING, MIXING, TRANSPORTING, AND PLACING |
|
ACI PRC-308 : 2016
|
GUIDE TO EXTERNAL CURING OF CONCRETE |
|
ACI 439.4R : 2009
|
REPORT ON STEEL REINFORCEMENT - MATERIAL PROPERTIES AND U.S. AVAILABILITY |
|
AWS D5.2 : 1984
|
WELDED STEEL ELEVATED TANKS, STANDPIPES, AND RESERVOIRS FOR WATER STORAGE, STANDARD FOR, |
|
ANS 52.1 : 83(R1988)
|
NUCLEAR SAFETY CRITERIA FOR THE DESIGN OF STATIONARY BOILING WATER REACTOR PLANTS |
|
ACI 318M : 2014
|
BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
|
ACI 346 : 2009
|
SPECIFICATION FOR CAST-IN-PLACE CONCRETE PIPE |
|
ASTM C 685/C685M : 2017 : REDLINE
|
Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
|
ASME NQA 2 : 89 SPECIAL NOTICE
|
QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS |