ASTM C 1128 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
Hardcopy , PDF
17-02-2023
English
30-01-2018
Committee |
C 26
|
DocumentType |
Guide
|
Pages |
26
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers the preparation and characterization of working reference materials (WRM) that are produced by a laboratory for its own use in the analysis of nuclear fuel cycle materials. Guidance is provided for proper preparation, packaging, and storage; requirements for characterization; homogeneity and stability considerations; and establishing traceability of WRMs to certified reference materials by a defined, statistically sound characterization process. While the guidance provided is generic for nuclear fuel cycle materials, detailed examples for some materials are provided in the appendixes.
1.2This guide does not apply to the preparation and characterization of certified reference materials (CRM). Refer to ISO 17034 and Guide 35 for those requirements.
1.3The information provided by this guide is found in the following sections:
Section | |
Perform WRM Planning | 6 |
Select, Collect, Prepare, and Process Materials | 7 |
Packaging and Store Materials | 8 |
Perform Homogeneity Study | 9 |
Perform Stability Studies | 10 |
Characterize Materials | 11 |
Perform Uncertainty Analysis | 12 |
Produce Documentation | 13 |
Carry Out WRM Utilization and Monitoring | 14 |
1.4The values stated in SI units are to be regarded as standard. Any non-SI units of measurement shown in parentheses are for information only.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 791 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide |
ASTM C 1210 : 2018 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1267 : 2017 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 758 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal |
ASTM C 1009 : 2013 : REV A | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1156 : 2018 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
ASTM C 1832 : 2023 | Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer |
ASTM C 1871 : 2022 | Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1204 : 2014 : R2023 | Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration |
ASTM E 3264 : 2021 | Standard Guide for Homogeneity of Samples and Reference Materials Used for Inter- and Intra-Laboratory Studies |
ASTM C 1592/C1592M : 2021 | Standard Guide for Making Quality Nondestructive Assay Measurements |
ASTM C 759 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions |
ASTM C 1068 : 2015 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1855 : 2018 | Standard Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence |
ASTM C 1832 : 2016 | Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1718 : 2010 : R2019 | Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning |
ASTM C 1865 : 2018 | Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer |
ASTM C 809 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum<brk/>Oxide-Boron Carbide Composite Pellets |
ASTM C 1316 : 2008 : R2017 | Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using <sup>252</sup>Cf Shuffler |
ASTM C 1204 : 2014 | Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration |
ASTM C 761 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride |
ASTM C 1207 : 2010 : R2018 | Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting |
ASTM C 1871 : 2018 : REV A | Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1133/C1133M : 2010 : R2018 | Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning |
ASTM C 1689 :2008 | Standard Practice for Subsampling of Uranium Hexafluoride |
ASTM C 1009 : 2013 : REV A | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1210 : 2018 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1267 : 2000 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 1347 : 2008 : R2014 : EDT 1 | Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis |
ASTM C 859 : 2014 : REV B | Standard Terminology Relating to Nuclear Materials |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM C 1637 : 2013 | Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis |
ASTM C 1009 : 1996 : EDT 1 | Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry (Withdrawn 2005) |
ASTM C 1672 : 2017 | Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1210 : 1996 : EDT 1 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry (Withdrawn 2005) |
ASTM C 1210 : 2021 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within Nuclear Industry |
ASTM C 1165 : 1990 : R2005 | Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<sub>2</sub>SO<sub>4</sub> at a Platinum Working Electrode |
ASTM C 1068 : 1996 : EDT 1 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1165 : 2022 | Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<inf>2</inf>SO<inf>4</inf> at a Platinum Working Electrode |
ASTM C 1108 : 2017 | Standard Test Method for Plutonium by Controlled-Potential Coulometry |
ASTM C 1210 : 2012 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1168 : 2015 | Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
ASTM C 1347 : 2008 : R2023 | Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis |
ASTM C 1165 : 1990 : R2000 : EDT 1 | Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<sub>2</sub>SO<sub>4</sub> at a Platinum Working Electrode |
ASTM C 1068 : 2003 : R2011 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1210 : 2006 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1637 : 2006 | Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM C 1108 : 1999 | Standard Test Method for Plutonium by Controlled-Potential Coulometry |
ASTM C 1689 : 2021 | Standard Practice for Subsampling of Uranium Hexafluoride |
ASTM C 1625 : 2019 | Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry |
ASTM C 1267 : 2011 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 1068 : 2015 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1068 : 2021 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1165 : 2012 | Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<inf>2</inf>SO<inf>4</inf> at a Platinum Working Electrode |
ASTM C 1297 : 2003 : R2011 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1672 : 2007 : R2014 | Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1297 : 2003 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 859 : 2022 | Standard Terminology Relating to Nuclear Materials |
ASTM C 859 : 2022 : REV A | Standard Terminology Relating to Nuclear Materials |
ASTM C 1297 : 1995 : EDT 1 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1625 : 2005 | Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM C 1068 : 2003 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1347 : 2002 | Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis |
ASTM C 1672 : 2007 | Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1637 : 2021 | Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis |
ASTM C 1689 : 2008 : REV A : R2014 | Standard Practice for Subsampling of Uranium Hexafluoride |
ASTM C 1267 : 2006 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 1267 : 2017 : R2022 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 1108 : 2022 | Standard Test Method for Plutonium by Controlled-Potential Coulometry |
ASTM C 1689 : 2008 : REV A | Standard Practice for Subsampling of Uranium Hexafluoride |
ASTM C 1108 : 2012 | Standard Test Method for Plutonium by Controlled-Potential Coulometry |
ASTM C 1168 : 2001 | Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
ASTM C 1165 : 2017 | Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<inf>2</inf>SO<inf>4</inf> at a Platinum Working Electrode |
ASTM C 1267 : 2017 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 1168 : 1990 : R1995 : EDT 1 | Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM C 1009 : 2021 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1009 : 2013 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
ASTM C 1347 : 2008 | Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis |
ASTM C 1009 : 2006 | Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1297 : 2018 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1625 : 2012 | Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry |
ASTM C 1168 : 2008 | Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.