ASTM D 5106 : 2015
|
Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures |
ASTM D 4215 : 2007 : R2013
|
Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures |
ASTM C 637 : 2020
|
Standard Specification for Aggregates for Radiation-Shielding Concrete |
ASTM D 5519 : 2015
|
Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024) |
ASTM D 4469 : 2017
|
Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures |
ASTM D 698 : 2012 : EDT 2
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3)) |
ASTM C 117 : 2017
|
Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
ASTM D 6460 : 2019
|
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion |
ASTM C 778 : 2017
|
Standard Specification for Standard Sand |
ASTM D 7428 : 2015
|
Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 3042 : 2017
|
Standard Test Method for Insoluble Residue in Carbonate Aggregates |
ASTM C 1747/C1747M : 2013
|
Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion (Withdrawn 2022) |
ASTM C 131/C131M : 2020
|
Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
ASTM D 1556/D1556M : 2015 : EDT 1
|
Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024) |
ASTM D 1557 : 2012 : EDT 1
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
ASTM C 897 : 2015 : R2020
|
Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters |
ASTM F 3012 : 2014
|
Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment |
ASTM D 6825 : 2014 : EDT 1
|
Standard Guide for Placement of Riprap Revetments |
ASTM D 7382 : 2020
|
Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer |
ASTM D 7564/D7564M : 2016
|
Standard Practice for Construction of Asphalt-Rubber Cape Seal |
ASTM D 6913/D6913M : 2017
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
ASTM D 7064/D7064M : 2008 : R2013
|
Standard Practice for Open-Graded Friction Course (OGFC) Mix Design |
ASTM F 735 : 2017
|
Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
ASTM C 1713 : 2017
|
Standard Specification for Mortars for the Repair of Historic Masonry |
ASTM D 5624 : 2013
|
Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications (Withdrawn 2022) |
ASTM C 110 : 2020
|
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
ASTM D 1139/D1139M : 2015
|
Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments |
ASTM C 195 : 2007 : R2019
|
Standard Specification for Mineral Fiber Thermal Insulating Cement |
ASTM C 127 : 2015
|
Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
ASTM D 448 : 2012 : R2017
|
Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
ASTM D 1073 : 2016
|
Standard Specification for Fine Aggregate for Asphalt Paving Mixtures |
ASTM D 5821 : 2013 : R2017
|
Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
ASTM C 331/C331M : 2017
|
Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
ASTM D 6783 : 2005 : REV A : R2017
|
Standard Specification for Polymer Concrete Pipe |
ASTM D 7370/D7370M : 2014
|
Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
ASTM D 6946/D6946M : 2013 : EDT 1
|
Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) (Withdrawn 2022) |
ASTM F 2075 : 2020
|
Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
ASTM D 4223/D4223M : 2020
|
Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils |
ASTM C 1252 : 2017
|
Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
ASTM C 516 : 2019
|
Standard Specification for Vermiculite Loose Fill Thermal Insulation |
ASTM D 1241 : 2015
|
Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024) |
ASTM C 802 : 2014
|
Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
ASTM D 1074 : 2017
|
Standard Test Method for Compressive Strength of Asphalt Mixtures |
ASTM D 6932/D6932M : 2008 : R2013
|
Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures |
ASTM D 2487 : 2017 : EDT 1
|
Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
ASTM D 7521 : 2016
|
Standard Test Method for Determination of Asbestos in Soil |
ASTM C 1017/C1017M : 2013 : EDT 1
|
Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete (Withdrawn 2022) |
ASTM D 6928 : 2017
|
Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 8038 : 2016
|
Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
ASTM C 549 : 2018
|
Standard Specification for Perlite Loose Fill Insulation |
ASTM D 8012 : 2018
|
Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications |