ASTM C 168 : 2019
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Thermal Insulation
Available format(s)
Hardcopy , PDF
Superseded date
26-04-2024
Superseded by
Language(s)
English
Published date
11-03-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This standard provides definitions, symbols, units, and abbreviations of terms used in ASTM standards pertaining to thermal insulating materials, and to materials associated with them.
| Committee |
C 16
|
| DocumentType |
Reference Material
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This standard provides definitions, symbols, units, and abbreviations of terms used in ASTM standards pertaining to thermal insulating materials, and to materials associated with them.
1.2This terminology is not intended to be used to classify insulation materials as having particular properties. Rather, classification of insulation materials is to be done by the material standards themselves.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1809 : 2020 | Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders |
| ASTM C 1263 : 1995 : R2021 | Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders |
| ASTM C 1685 : 2015 : R2021 | Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications |
| ASTM C 591 : 2021 | Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation |
| ASTM C 1879 : 2021 | Standard Practice for Installation of Aluminum and Stainless Steel Jacketing over Thermal Insulation on Pipe and Rigid Tubing |
| ASTM C 1423 : 2021 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| ASTM C 1822 : 2021 | Standard Specification for Insulating Covers on Accessible Lavatory Piping |
| ASTM C 1847 : 2021 | Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems |
| ASTM E 1745 : 2017 | Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
| ASTM E 1423 : 2021 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
| ASTM C 739 : 2021 : REV A | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
| ASTM C 1916 : 2021 | Standard Specification for Flexible Protective Jackets Made of Modified Asphalt/Butyl Rubber for Use over Thermal Insulation |
| ASTM C 518 : 2021 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASTM C 1130 : 2021 | Standard Practice for Calibration of Thin Heat Flux Transducers |
| ASTM F 683 : 2021 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
| ASTM C 1511 : 2015 : R2021 | Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type) |
| ASTM C 1340/C1340M : 2010 : R2021 | Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program |
| ASTM C 1258 : 2021 : REV A | Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation |
| ASTM C 1290 : 2016 : R2021 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1559 : 2015 : R2021 | Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type) |
| ASTM C 1046 : 1995 : R2021 | Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components |
| ASTM C 1859 : 2021 | Standard Practice for Determination of Thermal Resistance of Pneumatically Installed Loose-Fill Building Insulation (Behind Netting) for Enclosed Applications of the Building Thermal Envelope |
| ASTM C 1155 : 1995 : R2021 | Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data |
| ASTM E 2266 : 2021 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM E 2141 : 2021 | Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units |
| ASTM E 2231 : 2021 | Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
| ASTM C 1134 : 2017 : EDT 1 | Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion |
| ASTM C 1918 : 2021 | Standard Test Method for Water Retention of Rigid Thermal Insulation Materials after Immersion and Exposure to Drying Conditions |
| ASTM E 2032 : 2021 | Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM C 552 : 2022 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C 208 : 2022 | Standard Specification for Cellulosic Fiber Insulating Board |
| ASTM C 1289 : 2022 | Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board |
| ASTM C 592 : 2022 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 1775 : 2022 | Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications |
| ASTM C 728 : 2017 : REV A : R2022 | Standard Specification for Perlite Thermal Insulation Board |
| ASTM C 1710 : 2022 | Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form |
| ASTM C 1902 : 2022 | Standard Specification for Cellular Glass Insulation Used in Building and Roof Applications |
| ASTM E 96/E96M : 2022 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM C 1199 : 2022 | Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods |
| ASTM C 447 : 2015 | Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations |
| ASTM C 461 : 2017 | Standard Test Methods for Mastics and Coatings Used With Thermal Insulation |
| ASTM C 488 : 2016 | Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation |
| ASTM C 533 : 2017 | Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation |
| ASTM C 610 : 2017 | Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation |
| ASTM C 653 : 2017 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation |
| ASTM C 656 : 2017 | Standard Specification for Structural Insulating Board, Calcium Silicate |
| ASTM C 665 : 2017 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM C 667 : 2017 | Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air |
| ASTM C 726 : 2017 | Standard Specification for Mineral Wool Roof Insulation Board |
| ASTM C 991 : 2016 | Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM E 2599 : 2018 | Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics |
| ASTM C 1014 : 2017 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1015 : 2017 | Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation |
| ASTM C 1129 : 2017 | Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges |
| ASTM C 1149 : 2017 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1371 : 2015 | Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers |
| ASTM C 1410 : 2017 | Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation |
| ASTM C 1482 : 2017 | Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation |
| ASTM C 1497 : 2016 | Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation |
| ASTM C 1549 : 2016 | Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer |
| ASTM C 1667 : 2015 | Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels |
| ASTM C 1483/C1483M : 2017 | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
| ASTM C 335/C335M : 2017 | Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation |
| ASTM C 1785 : 2017 | Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing |
| ASTM E 298 : 2017 | Standard Test Methods for Assay of Organic Peroxides |
| ASTM E 3054/E3054M : 2016 | Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes |
| ASTM C 1848 : 2017 : REV A | Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure |
| ASTM C 1058/C1058M : 2010 : R2015 | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
| ASTM C 1060 : 2011 : REV A : R2015 | Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings |
| ASTM C 1101/C1101M : 2006 : R2017 | Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation |
| ASTM C 1146 : 2009 : R2018 | Standard Guide for Prefabricated Panel and H-bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air (Withdrawn 2024) |
| ASTM C 1153 : 2010 : R2015 | Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging |
| ASTM C 1335 : 2012 : R2017 | Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
| ASTM C 1373/C1373M : 2011 : R2017 | Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions |
| ASTM C 1574 : 2004 : R2018 | Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation |
| ASTM C 1594 : 2011 : R2017 | Standard Specification for Polyimide Rigid Cellular Thermal Insulation |
| ASTM C 163 : 2005 : R2016 | Standard Practice for Mixing Thermal Insulating Cement Samples |
| ASTM C 165 : 2007 : R2017 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
| ASTM C 166 : 2005 : R2016 | Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement |
| ASTM C 203 : 2005 : REV A : R2017 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
| ASTM C 302 : 2013 : R2017 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
| ASTM C 449 : 2007 : R2019 | Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement |
| ASTM C 585 : 2010 : R2016 | Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing |
| ASTM C 795 : 2008 : R2018 | Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel |
| ASTM C 870 : 2011 : R2017 | Standard Practice for Conditioning of Thermal Insulating Materials |
| ASTM C 945 : 2005 : R2017 | Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels |
| ASTM C 950/C950M : 2008 : R2017 | Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels |
| ASTM C 1043 : 2019 | Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources |
| ASTM C 892 : 2019 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation |
| ASTM C 1639 : 2019 | Standard Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation |
| ASTM C 1558 : 2019 | Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation |
| ASTM C 1071 : 2019 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 687 : 2018 | Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation |
| ASTM F 3340 : 2018 | Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus |
| ASTM C 167 : 2018 | Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations |
| ASTM C 549 : 2018 | Standard Specification for Perlite Loose Fill Insulation |
| ASTM C 411 : 2019 | Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation |
| ASTM C 177 : 2019 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM C 1485 : 2019 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source |
| ASTM C 647 : 2019 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM C 516 : 2019 | Standard Specification for Vermiculite Loose Fill Thermal Insulation |
| ASTM C 1126 : 2019 | Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation |
| ASTM C 196 : 2000 : R2019 | Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement |
| ASTM C 1045 : 2019 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
| ASTM C 1617 : 2019 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
| ASTM C 578 : 2019 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
| ASTM C 1743 : 2019 | Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction |
| ASTM E 154/E154M : 2008 : REV A : R2019 | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
| ASTM C 871 : 2018 | Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions |
| ASTM C1620 EDT 1 : 2016 | Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
| ASTM C 800 : 2019 | Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type) |
| ASTM C 764 : 2019 | Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation |
| ASTM C 553 : 2013 : R2019 | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
| ASTM C 390 : 2008 : R2019 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
| ASTM C 612 : 2014(R2019) | Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
| ASTM C 929 : 2014(R2019) | Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel |
| ASTM C 1774 : 2013 : R2019 | Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems |
| ASTM C 740/C740M : 2013(R2019) | Standard Guide for Evacuated Reflective Insulation In Cryogenic Service |
| ASTM C 1313/C1313M : 2013 : R2019 | Standard Specification for Sheet Radiant Barriers for Building Construction Applications |
| ASTM C 1794 : 2019 | Standard Test Methods for Determination of the Water Absorption Coefficient by Partial Immersion |
| ASTM C 727 : 2019 | Standard Practice for Installation and Use of Reflective Insulation in Building Constructions |
| ASTM C 1393 : 2019 | Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks |
| ASTM C 1470 : 2020 | Standard Guide for Testing the Thermal Properties of Advanced Ceramics |
| ASTM C 1630 : 2019 | Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations |
| ASTM D 7425/D7425M : 2013 : R2019 | Standard Specification for Spray Polyurethane Foam Used for Roofing Applications |
| ASTM C 547 : 2019 | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 680 : 2019 | Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs |
| ASTM C 1363 : 2019 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
| ASTM C 1676/C1676M : 2019 | Standard Specification for Microporous Thermal Insulation |
| ASTM C 1744 : 2019 | Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction |
| ASTM C 1852 : 2020 | Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives |
| ASTM C 421 : 2008 : R2020 | Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation |
| ASTM C 520 : 2015 : R2020 | Standard Test Methods for Density of Granular Loose Fill Insulations |
| ASTM C 835 : 2006 : R2020 | Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C |
| ASTM C 1321 : 2015 : R2020 | Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction |
| ASTM C 755 : 2020 | Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation |
| ASTM C 1320 : 2020 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
| ASTM E 1993/E1993M : 1998 : R2020 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM C 1763 : 2020 | Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials |
| ASTM C 1695 : 2020 | Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service |
| ASTM C 1086 : 2020 | Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation |
| ASTM C 419 : 2020 | Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings |
| ASTM C 1784 : 2020 | Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products |
| ASTM C 1224 : 2015 : R2020 | Standard Specification for Reflective Insulation for Building Applications |
| ASTM C 1668 : 2020 | Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems |
| ASTM E 398 : 2020 | Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement |
| ASTM E 241 : 2020 | Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM C 209 : 2020 | Standard Test Methods for Cellulosic Fiber Insulating Board |
| ASTM C 1696 : 2020 | Standard Guide for Industrial Thermal Insulation Systems |
| ASTM F 2165 : 2019 | Standard Specification for Flexible Pre-Insulated Plastic Piping |
| ASTM C 1534 : 2020 : REV A | Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems |
| ASTM C 1409 : 2012 : R2018 | Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components |
| ASTM C 1616 : 2007 : R2018 | Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight |
| ASTM C 1484 : 2010 : R2018 | Standard Specification for Vacuum Insulation Panels |
| ASTM C 692 : 2013 : R2018 | Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel |
| ASTM C 1114 : 2006 : R2019 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
| ASTM C 1374 : 2018 | Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation |
| ASTM C 1304 : 2018 | Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
| ASTM C 1303/C1303M : 2019 | Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation |
| ASTM C 450 : 2018 | Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging |
| ASTM C 550 : 2015 : R2020 | Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation |
| ASTM C 1044 : 2016 : R2020 | Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode |
| ASTM F 3319 : 2020 | Standard Specification for Selection and Application of Field-Installed Cryogenic Pipe and Equipment Insulation Systems on Liquefied Natural Gas (LNG)-Fueled Ships |
| ASTM C 534/C534M : 2020 : REV A | Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1029 : 2020 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM C 240 : 2021 | Standard Test Methods for Testing Cellular Glass Insulation Block |
| ASTM C 303 : 2021 | Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation |
| ASTM C 1729 : 2021 | Standard Specification for Aluminum Jacketing for Insulation |
| ASTM C 1729M : 2021 | Standard Specification for Aluminum Jacketing for Insulation |
| ASTM C 1427 : 2021 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM C 1136 : 2021 | Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation |
| ASTM C 1767M : 2021 | Standard Specification for Stainless Steel Jacketing for Insulation |
| ASTM C 1767 : 2021 | Standard Specification for Stainless Steel Jacketing for Insulation |
| ASTM C 1728 : 2021 | Standard Specification for Flexible Aerogel Insulation |
| ASTM C 195 : 2007 : R2019 | Standard Specification for Mineral Fiber Thermal Insulating Cement |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 3574 : 2011 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2282 : 2013 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM D 3574 : 2008 | Standard Test Methods for Flexible Cellular Materials<span class='unicode'>—</span>Slab, Bonded, and Molded Urethane Foams |
| ASTM D 3574 : 2017 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM D 3574 : 1995 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM E 2282 : 2003 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 2282 : 2014 : R2019 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM D 3574 : 1977 : EDT 2 | Standard Methods of Testing Flexible Cellular Materials-Slab, Bonded, And Molded Urethane Foams |
| ASTM D 3574 : 2003 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM E 2282 : 2014 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM D 3574 : 2016 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM D 3574 : 2001 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM E 2282 : 2009 | Standard Guide for Defining the Test Result of a Test Method |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 3574 : 2005 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
| ASTM D 3574 : 2001 : EDT 1 | Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.