• ASTM C 1783 : 2015

    Current The latest, up-to-date edition.

    Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-09-2015

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 15.01, 2017 Defines a guide to preparing material specifications for fiber reinforced carbon-carbon (C-C) composite structures (flat plates, rectangular bars, round rods, an d tubes) manufactured specifically for structural components in nuclear reactor core applications.

    Scope - (Show below) - (Hide below)

    1.1This document is a guide to preparing material specifications for fiber reinforced carbon-carbon (C-C) composite structures (flat plates, rectangular bars, round rods, and tubes) manufactured specifically for structural components in nuclear reactor core applications. The carbon-carbon composites consist of carbon/graphite fibers (from PAN, pitch, or rayon precursors) in a carbon/graphite matrix produced by liquid infiltration/pyrolysis and/or by chemical vapor infiltration.

    1.2This guide provides direction and guidance for the development of a material specification for a specific C-C composite component or product for nuclear reactor applications. The guide considers composite constituents and structure, physical and chemical properties, mechanical properties, thermal properties, performance durability, methods of testing, materials and fabrication processing, and quality assurance. The C-C composite materials considered here would be suitable for nuclear reactor core applications where neutron irradiation-induced damage and dimensional changes are a significant design consideration. (1-4)2

    1.3The component specification is to be developed by the designer/purchaser/user. The designer/purchaser/user shall define and specify in detail any and all application-specific requirements for necessary design, manufacturing, and performance factors of the ceramic composite component. This guide for material specifications does not directly address component/product-specific issues, such as geometric tolerances, permeability, bonding, sealing, attachment, and system integration.

    1.4This guide is specifically focused on C-C composite components and structures with flat panel, solid rectangular bar, solid round rod, or tubular geometries.

    1.5This specification may also be applicable to C-C composites used for other structural applications discounting the nuclear-specific chemical purity and irradiation behavior factors.

    1.6Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

    1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee C 28
    Document Type Guide
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM C 1836 : 2016 Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 2586 : 2012 Standard Practice for Calculating and Using Basic Statistics
    ASTM D 7219 : 2008 : R2014 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
    ASTM D 7219 : 2008 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
    ASTM C 1233 : 2015 : REDLINE Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
    ASTM E 1269 : 2001 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    ASTM D 3171 : 1999 Standard Test Methods for Constituent Content of Composite Materials
    ASTM D 5961/D5961M : 2017 : REDLINE Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
    ASTM D 5600 : 2004 : EDT 1 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM C 1259 : 2014 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM D 7136/D7136M : 2015 : REDLINE Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
    ASTM C 1359 : 1996 : R2000 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Specimens at Elevated Temperatures
    ASTM C 1525 : 2004 : R2013 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
    ASTM D 5600 : 2009 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM C 1557 : 2003 : R2013 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
    ASTM D 5600 : 2014 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 4284 : 2003 Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
    ASTM C 1360 : 2001 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM C 1275 : 2000 : R2005 : EDT 1 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
    ASTM E 228 : 2017 : REDLINE Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
    ASTM E 143 : 2013 Standard Test Method for Shear Modulus at Room Temperature
    ASTM C 1557 : 2003 : EDT 1 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
    ASTM C 1198 : 2008 : EDT 1 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
    ASTM C 1337 : 2017 : REDLINE Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
    ASTM C 1179 : 1991 : R2010 : EDT 1 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    ASTM D 5600 : 2017 : REDLINE Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 7219 : 2019 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
    ASTM C 1468 : 2019 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
    ASTM D 3800 : 1999 : R2004 Standard Test Method for Density of High-Modulus Fibers
    ASTM C 1337 : 1996 : R2005 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
    ASTM C 1341 : 2013 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
    ASTM D 3878 : 2002 : REV A Standard Terminology for Composite Materials
    ASTM C 1359 : 2005 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
    ASTM D 6507 : 2019 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    ASTM C 1179 : 2015 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    ASTM E 228 : 2017 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
    ASTM C 1198 : 2009 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
    ASTM C 1358 : 1996 : R2000 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Specimens at Ambient Temperatures
    ASTM E 1461 : 2011 Standard Test Method for Thermal Diffusivity by the Flash Method
    ASTM E 1922 : 2004 : R2015 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
    ASTM D 4850 : 2002 Standard Terminology Relating to Fabric
    ASTM C 1360 : 2017 : REDLINE Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM C 1341 : 2013 : R2018 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
    ASTM C 1470 : 2006 : R2013 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
    ASTM D 7542 : 2015 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
    ASTM E 1461 : 2007 Standard Test Method for Thermal Diffusivity by the Flash Method
    ASTM D 4850 : 2000 Standard Terminology Relating to Fabric
    ASTM C 1292 : 2016 : REDLINE Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM C 1291 : 2000 : REV A : R2005 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
    ASTM D 4284 : 2012 : R2017 : EDT 1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
    ASTM C 1275 : 2016 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
    ASTM E 1269 : 2005 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    ASTM C 1341 : 2000 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
    ASTM D 4018 : 2011 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
    ASTM C 1039 : 1985 : R2015 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
    ASTM D 4850 : 2002 : REV A Standard Terminology Relating to Fabric
    ASTM D 4284 : 2012 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
    ASTM D 5528 : 2001 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM D 3878 : 2015 Standard Terminology for Composite Materials
    ASTM D 3878 : 2019 Standard Terminology for Composite Materials
    ASTM C 611 : 2021 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
    ASTM C 625 : 2015 : REDLINE Standard Practice for Reporting Irradiation Results on Graphite
    ASTM C 1360 : 2010 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM D 3878 : 2000 Standard Terminology Composite Materials
    ASTM C 1274 : 2000 : R2006 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
    ASTM C 1468 : 2006 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
    ASTM D 5528 : 1994 : REV A Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM C 1292 : 2010 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM C 1557 : 2003 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
    ASTM C 1425 : 2005 Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
    ASTM D 4850 : 2003 : REV A : R2007 Standard Terminology Relating to Fabric
    ASTM E 2586 : 2014 Standard Practice for Calculating and Using Basic Statistics
    ASTM C 1557 : 2014 Standard Test Method for Tensile Strength and Young’s Modulus of Fibers
    ASTM C 611 : 1998 : R2016 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature
    ASTM D 5528 : 2001 : R2007 : EDT 3 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM C 1198 : 2008 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
    ASTM C 1341 : 2000 : R2005 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
    ASTM D 4850 : 2008 : EDT 1 Standard Terminology Relating to Fabrics and Fabric Test Methods
    ASTM C 1468 : 2000 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
    ASTM D 3171 : 2011 Standard Test Methods for Constituent Content of Composite Materials
    ASTM C 1525 : 2003 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
    ASTM C 1525 : 2004 : R2009 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
    ASTM C 1233 : 2003 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
    ASTM D 4850 : 2013 Standard Terminology Relating to Fabrics and Fabric Test Methods
    ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM C 1683 : 2010 : R2015 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
    ASTM C 1233 : 1998 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
    ASTM C 714 : 2017 : REDLINE Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
    ASTM D 3800 : 2016 : REDLINE Standard Test Method for Density of High-Modulus Fibers
    ASTM C 1179 : 2015 : REDLINE Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    ASTM D 5528 : 2013 : REDLINE Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM C 1259 : 2021 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM C 1359 : 2018 : EDT 1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
    ASTM C 1683 : 2010 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
    ASTM D 2766 : 1995 : R2009 Standard Test Method for Specific Heat of Liquids and Solids (Withdrawn 2018)
    ASTM C 1274 : 2000 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
    ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
    ASTM E 1269 : 1999 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    ASTM D 3800 : 1999 : R2010 Standard Test Method for Density of High-Modulus Fibers
    ASTM C 1425 : 2011 Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
    ASTM D 5600 : 1998 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM D 4850 : 2012 Standard Terminology Relating to Fabrics and Fabric Test Methods
    ASTM C 1557 : 2020 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
    ASTM E 2586 : 2010 : REV A Standard Practice for Calculating and Using Basic Statistics
    ASTM D 7542 : 2009 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
    ASTM C 1259 : 2001 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM D 6507 : 2016 : REDLINE Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    ASTM C 1557 : 2014 : REDLINE Standard Test Method for Tensile Strength and Young’s Modulus of Fibers
    ASTM D 4018 : 2017 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
    ASTM D 6671 : 2001 Standards Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
    ASTM C 1239 : 2006 : REV A Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM D 3878 : 2003 : REV A Standard Terminology for Composite Materials
    ASTM E 2586 : 2019 Standard Practice for Calculating and Using Basic Statistics
    ASTM C 1179 : 2021 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    ASTM D 3878 : 2016 Standard Terminology for Composite Materials
    ASTM C 1358 : 2013 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
    ASTM E 1309 : 2000 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
    ASTM C 1525 : 2002 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
    ASTM C 1274 : 2010 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
    ASTM D 3878 : 2019 : REV A Standard Terminology for Composite Materials
    ASTM D 4018 : 1999 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
    ASTM C 1291 : 2000 : REV A : R2010 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
    ASTM D 3878 : 2020 : REV A Standard Terminology for Composite Materials
    ASTM D 3878 : 1998 Standard Terminology Composite Materials
    ASTM E 1461 : 2013 : REDLINE Standard Test Method for Thermal Diffusivity by the Flash Method
    ASTM C 1425 : 2019 Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
    ASTM C 1198 : 2020 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
    ASTM D 7542 : 2015 : REDLINE Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
    ASTM C 1275 : 2000 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
    ASTM C 1198 : 1996 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
    ASTM C 1525 : 2004 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
    ASTM C 1239 : 2013 : R2018 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM D 3171 : 2022 Standard Test Methods for Constituent Content of Composite Materials
    ASTM C 1259 : 2008 : EDT 1 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM C 1259 : 2015 : REDLINE Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM C 1039 : 1985 : R2010 : EDT 1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
    ASTM D 5528 : 2001 : R2007 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM E 2586 : 2012 : REV A Standard Practice for Calculating and Using Basic Statistics
    ASTM C 1292 : 2000 : R2005 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM E 261 : 2016 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
    ASTM D 3878 : 2018 Standard Terminology for Composite Materials
    ASTM D 6507 : 2011 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    ASTM C 1274 : 1995 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
    ASTM D 4850 : 2013 : R2017 : EDT 1 Standard Terminology Relating to Fabrics and Fabric Test Methods
    ASTM E 2586 : 2007 Standard Practice for Calculating and Using Basic Statistics
    ASTM C 1337 : 2010 : R2015 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
    ASTM C 1233 : 2015 : R2021 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
    ASTM C 1359 : 2011 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
    ASTM E 132 : 2017 : REDLINE Standard Test Method for Poisson’s Ratio at Room Temperature
    ASTM D 7542 : 2021 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
    ASTM E 2586 : 2016 Standard Practice for Calculating and Using Basic Statistics
    ASTM D 3171 : 2009 Standard Test Methods for Constituent Content of Composite Materials
    ASTM D 3800 : 2022 Standard Test Method for Density of High-Modulus Fibers
    ASTM D 5600 : 2022 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM E 143 : 2013 : REDLINE Standard Test Method for Shear Modulus at Room Temperature
    ASTM C 1198 : 2009 : R2013 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
    ASTM C 1275 : 2010 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
    ASTM C 561 : 2016 : REDLINE Standard Test Method for Ash in a Graphite Sample
    ASTM E 1461 : 1992 Standard Test Method for Thermal Diffusivity of Solids by the Flash Method
    ASTM D 3878 : 2002 Standard Terminology for Composite Materials
    ASTM C 1291 : 2000 : REV A Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
    ASTM C 1470 : 2000 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
    ASTM E 408 : 2013 : REDLINE Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
    ASTM D 5528 : 2013 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM C 1233 : 2015 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
    ASTM C 577 : 2007 Standard Test Method for Permeability of Refractories
    ASTM D 6507 : 2016 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    ASTM E 2586 : 2019 : EDT 1 Standard Practice for Calculating and Using Basic Statistics
    ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM E 2586 : 2018 Standard Practice for Calculating and Using Basic Statistics
    ASTM C 242 : 2020 : REV B Standard Terminology of Ceramic Whitewares and Related Products
    ASTM C 242 : 2021 Standard Terminology of Ceramic Whitewares and Related Products
    ASTM D 4850 : 2008 Standard Terminology Relating to Fabrics and Fabric Test Methods
    ASTM C 1239 : 2000 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM C 1259 : 2015 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM D 4850 : 2003 Standard Terminology Relating to Fabric
    ASTM C 1291 : 2018 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
    ASTM C 1179 : 1991 : R2005 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    ASTM D 3171 : 2015 : REDLINE Standard Test Methods for Constituent Content of Composite Materials
    ASTM D 5600 : 2017 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM C 1683 : 2008 : EDT 1 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
    ASTM D 3878 : 2004 Standard Terminology for Composite Materials
    ASTM D 3800 : 1999 Standard Test Method for Density of High-Modulus Fibers
    ASTM E 289 : 2017 : REDLINE Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
    ASTM D 4018 : 1999 : R2004 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
    ASTM C 1239 : 2000 : R2005 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM E 1269 : 2004 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    ASTM E 2586 : 2012 : REV B Standard Practice for Calculating and Using Basic Statistics
    ASTM C 1274 : 2012 : R2020 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
    ASTM C 1039 : 1985 : R2000 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
    ASTM D 7219 : 2005 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
    ASTM C 1291 : 2000 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
    ASTM D 5600 : 2004 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    ASTM C 1359 : 2018 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
    ASTM C 625 : 2015 Standard Practice for Reporting Irradiation Results on Graphite
    ASTM C 1360 : 2010 : R2015 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM C 1039 : 1985 : R2005 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
    ASTM C 1360 : 2017 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM D 4850 : 2013 : R2017 Standard Terminology Relating to Fabrics and Fabric Test Methods
    ASTM E 1922 : 1997 Standard Test Method for Translaminar Fracture Toughness of Laminated Polymer Matrix Composite Materials
    ASTM D 4850 : 2000 : REV A Standard Terminology Relating to Fabric
    ASTM E 261 : 2016 : REDLINE Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
    ASTM C 1259 : 1998 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM C 1198 : 2001 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
    ASTM D 3878 : 2007 : R2013 Standard Terminology for Composite Materials
    ASTM E 1309 : 2000 : R2011 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases (Withdrawn 2015)
    ASTM C 1337 : 2017 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
    ASTM D 3878 : 2020 : REDLINE Standard Terminology for Composite Materials
    ASTM C 1341 : 2006 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
    ASTM C 1425 : 2013 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
    ASTM C 1557 : 2003 : R2008 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
    ASTM E 1269 : 2011 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    ASTM C 1292 : 2000 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM D 3878 : 2020 Standard Terminology for Composite Materials
    ASTM D 4018 : 2017 : REDLINE Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
    ASTM E 111 : 2017 : REDLINE Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
    ASTM E 2586 : 2010 Standard Practice for Calculating and Using Basic Statistics
    ASTM D 3878 : 2003 Standard Terminology for Composite Materials
    ASTM C 1470 : 2020 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
    ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM C 559 : 2016 : REDLINE Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
    ASTM C 1274 : 2012 : REDLINE Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
    ASTM D 2766 : 1995 Standard Test Method for Specific Heat of Liquids and Solids
    ASTM E 1461 : 2013 : R2022 Standard Test Method for Thermal Diffusivity by the Flash Method
    ASTM E 1461 : 2013 Standard Test Method for Thermal Diffusivity by the Flash Method
    ASTM E 1922 : 2004 : R2010 : EDT 1 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
    ASTM C 816 : 2015 : REDLINE Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method
    ASTM C 1358 : 2005 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
    ASTM C 1360 : 2001 : R2007 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM D 3878 : 2007 Standard Terminology for Composite Materials
    ASTM C 1239 : 2006 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM C 1358 : 2011 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
    ASTM D 4284 : 2007 Standard Test Method for Determining Pore Volume Distribution of Catalysts by Mercury Intrusion Porosimetry
    ASTM E 1461 : 2001 Standard Test Method for Thermal Diffusivity of Solids by the Flash Method
    ASTM D 6507 : 2000 : R2005 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    ASTM C 1360 : 1996 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM D 3800 : 2016 Standard Test Method for Density of High-Modulus Fibers
    ASTM D 2766 : 1995 : R2000 Standard Test Method for Specific Heat of Liquids and Solids
    ASTM D 6507 : 2000 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    ASTM C 1468 : 2019 : REV A Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
    ASTM C 1274 : 2012 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
    ASTM D 3171 : 1999 : R2004 Standard Test Methods for Constituent Content of Composite Materials
    ASTM C 1275 : 2018 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
    ASTM C 1468 : 2013 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
    ASTM E 1309 : 2000 : R2005 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
    ASTM C 838 : 2016 : REDLINE Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
    ASTM C 1359 : 2013 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
    ASTM D 4850 : 2003 : REV A Standard Terminology Relating to Fabric
    ASTM C 1683 : 2010 : R2019 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
    ASTM D 2766 : 1995 : R2005 Standard Test Method for Specific Heat of Liquids and Solids
    ASTM E 1269 : 2011 : R2018 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    ASTM E 143 : 2020 Standard Test Method for Shear Modulus at Room Temperature
    ASTM C 1291 : 2016 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Monolithic Advanced Ceramics
    ASTM D 3171 : 2015 Standard Test Methods for Constituent Content of Composite Materials
    ASTM C 1233 : 2009 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
    ASTM C 1239 : 2013 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM D 3878 : 2004 : REV A Standard Terminology for Composite Materials
    ASTM C 1239 : 2007 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
    ASTM C 1470 : 2006 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
    ASTM C 1425 : 1999 Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
    ASTM C 1259 : 2008 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
    ASTM D 3171 : 2006 Standard Test Methods for Constituent Content of Composite Materials
    ASTM E 261 : 2016 : R2021 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
    ASTM E 2586 : 2013 Standard Practice for Calculating and Using Basic Statistics
    ASTM D 5528 : 2001 : R2007 : EDT 2 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    ASTM C 1683 : 2008 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
    ASTM C 1292 : 2022 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM D 4018 : 1999 : R2008 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
    ASTM C 1525 : 2018 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
    ASTM C 1292 : 2016 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
    ASTM C 1337 : 1996 : R2000 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
    ASTM E 228 : 2022 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
    ASTM C 1179 : 1991 : R2000 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    ASTM C 1358 : 2018 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
    ASTM C 838 : 1996 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
    ASTM C 1275 : 2015 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
    ASTM D 3878 : 2001 Standard Terminology Composite Materials
    ASTM C 625 : 2015 : R2021 Standard Practice for Reporting Irradiation Results on Graphite
    ASTM C 769 : 2015 : REDLINE Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus
    ASTM D 7137/D7137M : 2017 : REDLINE Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
    ASTM C 1337 : 2010 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
    ASTM E 1922 : 2004 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
    ASTM D 4850 : 2013 : EDT 1 Standard Terminology Relating to Fabrics and Fabric Test Methods
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective