ASTM C 364/C364M : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
Hardcopy , PDF
08-05-2024
English
13-04-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.This test method covers the compressive properties of structural sandwich construction in a direction parallel to the sandwich facing plane.
| Committee |
D 30
|
| DocumentType |
Test Method
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This test method covers the compressive properties of structural sandwich construction in a direction parallel to the sandwich facing plane. Permissible core material forms include those with continuous bonding surfaces (such as balsa wood and foams) as well as those with discontinuous bonding surfaces (such as honeycomb).
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 4762 : 2023 | Standard Guide for Testing Polymer Matrix Composite Materials |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM D 3171 : 1999 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM E 1012 : 2014 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM D 2584 : 2002 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM D 3878 : 2002 : REV A | Standard Terminology for Composite Materials |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM D 3878 : 2023 | Standard Terminology for Composite Materials |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 3878 : 2015 | Standard Terminology for Composite Materials |
| ASTM D 2584 : 2008 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM D 3878 : 2019 | Standard Terminology for Composite Materials |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 3878 : 2000 | Standard Terminology Composite Materials |
| ASTM D 2584 : 1994 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 3171 : 2011 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 2734 : 2023 | Standard Test Methods for Void Content of Reinforced Plastics |
| ASTM E 1012 : 1999 | Standard Practice for Verification of Specimen Alignment Under Tensile Loading |
| ASTM D 2734 : 2016 | Standard Test Methods for Void Content of Reinforced Plastics |
| ASTM E 1012 : 2012 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 122 : 2017 : R2022 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 122 : 2017 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 1012 : 2014 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM D 3878 : 2003 : REV A | Standard Terminology for Composite Materials |
| ASTM D 2584 : 2011 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM D 3878 : 2016 | Standard Terminology for Composite Materials |
| ASTM D 3878 : 2019 : REV A | Standard Terminology for Composite Materials |
| ASTM D 3878 : 2020 : REV A | Standard Terminology for Composite Materials |
| ASTM D 3878 : 1998 | Standard Terminology Composite Materials |
| ASTM D 3171 : 2022 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM D 3878 : 2018 | Standard Terminology for Composite Materials |
| ASTM E 1012 : 2012 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM D 3171 : 2009 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM D 3878 : 2002 | Standard Terminology for Composite Materials |
| ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3878 : 2020 : REV B | Standard Terminology for Composite Materials |
| ASTM D 2584 : 1968 | Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins |
| ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 1012 : 2005 | Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM D 3878 : 2004 | Standard Terminology for Composite Materials |
| ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
| ASTM D 2734 : 1994 | Standard Test Methods for Void Content of Reinforced Plastics |
| ASTM D 3878 : 2007 : R2013 | Standard Terminology for Composite Materials |
| ASTM D 3878 : 2020 : REDLINE | Standard Terminology for Composite Materials |
| ASTM D 3878 : 2020 | Standard Terminology for Composite Materials |
| ASTM D 2584 : 2018 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
| ASTM D 3878 : 2003 | Standard Terminology for Composite Materials |
| ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3878 : 2007 | Standard Terminology for Composite Materials |
| ASTM D 2734 : 2009 | Standard Test Methods for Void Content of Reinforced Plastics |
| ASTM D 3171 : 1999 : R2004 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3171 : 2015 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
| ASTM D 3878 : 2004 : REV A | Standard Terminology for Composite Materials |
| ASTM D 3171 : 2006 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM E 1012 : 2019 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
| ASTM D 3878 : 2001 | Standard Terminology Composite Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.