|
ASTM D 3308 : 2012 : R2022
|
Standard Specification for PTFE Resin Skived Tape |
|
ASTM D 5450/D5450M : 2022
|
Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
|
ASTM D 6772/D6772M : 2022
|
Standard Test Method for Dimensional Stability of Sandwich Core Materials |
|
ASTM C 366/C366M : 2016 : R2022 : EDT 1
|
Standard Test Methods for Measurement of Thickness of Sandwich Cores |
|
ASTM D 7193 : 2017 : R2022
|
Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 1243 : 2022
|
Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers |
|
ASTM D 7332/D7332M : 2022
|
Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
|
ASTM D 5449/D5449M : 2022
|
Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
|
ASTM F 1645/F1645M : 2022
|
Standard Test Method for Water Migration in Honeycomb Core Materials |
|
ASTM C 271/C271M : 2016 : R2022 : EDT 1
|
Standard Test Method for Density of Sandwich Core Materials |
|
ASTM D 5085 : 2021
|
Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Suppressed Ion Chromatography |
|
ASTM D 6790/D6790M : 2022
|
Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores |
|
ASTM D 5260 : 2022
|
Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
|
ASTM D 5448/D5448M : 2022
|
Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
|
ASTM C 365/C365M : 2022
|
Standard Test Method for Flatwise Compressive Properties of Sandwich Cores |
|
ASTM F 2577 : 2022
|
Standard Guide for Compositional Evaluation of Declarable Substances and Substances of Concern for Materials in Products |
|
ASTM D 1667 : 2022
|
Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell) |
|
ASTM D 3291 : 2022
|
Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression |
|
ASTM D 1042 : 2022
|
Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture |
|
ASTM D 7293 : 2019
|
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
|
ASTM D 1784 : 2020
|
Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
|
ASTM D 648 : 2018
|
Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
|
ASTM D 8387/D8387M : 2021
|
Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates |
|
ASTM D 4364 : 2013 : R2022 : EDT 1
|
Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight |
|
ASTM D 707 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
|
ASTM F 1488 : 2014 : R2019
|
Standard Specification for Coextruded Composite Pipe |
|
ASTM D 4878 : 2015
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols |
|
ASTM F 1281 : 2017 : R2021 : EDT 1
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
|
ASTM D 5028 : 2017
|
Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis |
|
ASTM D 3935 : 2021
|
Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
|
ASTM D 6264/D6264M : 2017
|
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
|
ASTM D 5225 : 2022
|
Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer |
|
ASTM D 746 : 2020
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
|
ASTM C 1916 : 2021
|
Standard Specification for Flexible Protective Jackets Made of Modified Asphalt/Butyl Rubber for Use over Thermal Insulation |
|
ASTM D 6394 : 2021 : REV A
|
Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) |
|
ASTM F 3314 : 2020
|
Standard Terminology Relating to Technology and Underground Infrastructure |
|
ASTM D 789 : 2019
|
Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions |
|
ASTM D 952 : 2015 : R2021
|
Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials |
|
ASTM D 3851 : 2017 : R2022
|
Standard Specification for Microcellular Polyurethane Shoe Soling Materials |
|
ASTM F 477 : 2014 : R2021
|
Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
|
ASTM D 3839 : 2014 : R2019
|
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe |
|
ASTM D 953 : 2019
|
Standard Test Method for Pin-Bearing Strength of Plastics |
|
ASTM D 6117 : 2018
|
Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes |
|
ASTM F 1859 : 2021 : REV A
|
Standard Specification for Rubber Sheet Floor Covering Without Backing |
|
ASTM D 7436 : 2017
|
Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology |
|
ASTM D 3841 : 2021
|
Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
|
ASTM C 581 : 2020
|
Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
|
ASTM D 4397 : 2016
|
Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
|
ASTM D 7029 : 2017
|
Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C) |
|
ASTM D 6040 : 2018
|
Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 7993 : 2015(R2019)
|
Standard Guide for Analyzing Complex Phthalates |
|
ASTM D 7290 : 2006 : R2022
|
Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications |
|
ASTM D 5436 : 2015 : R2020
|
Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
|
ASTM D 5629 : 2016
|
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers |
|
ASTM C 393/C393M : 2020
|
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure |
|
ASTM D 1693 : 2021
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
|
ASTM D 7565/D7565M : 2010 : R2017
|
Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures |
|
ASTM C 717 : 2019
|
Standard Terminology of Building Seals and Sealants |
|
ASTM D 4804 : 2020
|
Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
|
ASTM D 5226 : 2021
|
Standard Practice for Dissolving Polymer Materials |
|
ASTM D 1790 : 2021
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
|
ASTM D 5117 : 2017
|
Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
|
ASTM D 3679 : 2021
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
|
ASTM F 1673 : 2010 : R2021 : EDT 1
|
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
|
ASTM D 5507 : 2021 : REV A
|
Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography |
|
ASTM D 6042 : 2009 : R2016
|
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
|
ASTM G 20 : 2010(R2019)
|
Standard Test Method for Chemical Resistance of Pipeline Coatings |
|
ASTM D 7253 : 2022
|
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols |
|
ASTM D 5628 : 2018
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
|
ASTM D 6341 : 2021
|
Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C) |
|
ASTM D 1709 : 2022
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
|
ASTM C 1147 : 2014 : R2022
|
Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics |
|
ASTM D 3763 : 2018
|
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
|
ASTM F 1499 : 2022
|
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
|
ASTM D 5086 : 2020
|
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
|
ASTM D 5869/D5869M : 2007 : REV A : R2018 : EDT 1
|
Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials |
|
ASTM F 3009 : 2014 : R2018
|
Standard Specification for Polyolefin Composition Floor Tile |
|
ASTM D 1004 : 2021
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
|
ASTM D 6868 : 2021
|
Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities |
|
ASTM D 4067 : 2021
|
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
|
ASTM D 6109 : 2019
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
|
ASTM D 1894 : 2014
|
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023) |
|
ASTM D 2103 : 2015
|
Standard Specification for Polyethylene Film and Sheeting |
|
ASTM D 788 : 2016
|
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
|
ASTM D 6779 : 2021
|
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA) |
|
ASTM D 4097 : 2019
|
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
|
ASTM D 787 : 2018
|
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds |
|
ASTM D 5047 : 2017
|
Standard Specification for Polyethylene Terephthalate Film and Sheeting |
|
ASTM D 4068 : 2017 : R2022
|
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
|
ASTM D 4877 : 2019
|
Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates |
|
ASTM D 5048 : 2020 : REV A
|
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame |
|
ASTM C 364/C364M : 2016
|
Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions |
|
ASTM D 4889 : 2021
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates |
|
ASTM D 7191 : 2018
|
Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor |
|
ASTM D 8133 : 2021
|
Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry |
|
ASTM D 4275 : 2017
|
Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography |
|
ASTM D 5272 : 2008 : R2021
|
Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics |
|
ASTM D 6783 : 2005 : REV A : R2022
|
Standard Specification for Polymer Concrete Pipe |
|
ASTM D 3299 : 2018
|
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
|
ASTM F 3203 : 2019
|
Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing |
|
ASTM D 3013 : 2013 : R2021
|
Standard Specification for Epoxy Molding Compounds |
|
ASTM D 6713 : 2021
|
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
|
ASTM D 5927 : 2017
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
|
ASTM D 2765 : 2016
|
Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
|
ASTM F 2617 : 2015
|
Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry |
|
ASTM F 1027 : 1986 : R2017
|
Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices (Withdrawn 2023) |
|
ASTM D 4960 : 2020
|
Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials |
|
ASTM D 3307 : 2021
|
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
|
ASTM D 6474 : 2020
|
Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography |
|
ASTM D 1601 : 2018
|
Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers |
|
ASTM D 6662 : 2022
|
Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards |
|
ASTM E 2740 : 2012 : R2018
|
Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing |
|
ASTM D 229 : 2019 : EDT 1
|
Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation |
|
ASTM D 6339 : 2011 : R2019
|
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
|
ASTM D 8336 : 2021
|
Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure |
|
ASTM D 3350 : 2021
|
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
|
ASTM D 5998 : 2016
|
Standard Specification for Molded Polyethylene Shipping and Storage Drums |
|
ASTM F 1697 : 2018
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit |
|
ASTM D 4726 : 2018
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors |
|
ASTM D 2925 : 2014(R2019)
|
Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
|
ASTM D 5012 : 2020
|
Standard Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
|
ASTM D 7997 : 2021
|
Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations |
|
ASTM D 4475 : 2021
|
Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method |
|
ASTM D 7774 : 2022
|
Standard Test Method for Flexural Fatigue Properties of Plastics |
|
ASTM D 5675 : 2013 : R2018
|
Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders |
|
ASTM D 7205/D7205M : 2021
|
Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
|
ASTM D 3575 : 2020
|
Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers |
|
ASTM C 582 : 2009 : R2016
|
Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment |
|
ASTM D 2842 : 2019
|
Standard Test Method for Water Absorption of Rigid Cellular Plastics |
|
ASTM D 7914/D7914M : 2021
|
Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations |
|
ASTM D 4396 : 2022
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
|
ASTM D 7194 : 2019
|
Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) |
|
ASTM D 1998 : 2021
|
Standard Specification for Polyethylene Upright Storage Tanks |
|
ASTM D 696 : 2016
|
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
|
ASTM D 4066 : 2013 : R2019
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
|
ASTM D 5511 : 2018
|
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
|
ASTM D 5857 : 2017
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
|
ASTM D 3039/D3039M : 2017
|
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
|
ASTM D 5365 : 2018
|
Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
|
ASTM D 4670 : 2017 : R2022 : EDT 1
|
Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols |
|
ASTM D 5492 : 2017
|
Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
|
ASTM D 2538 : 2018
|
Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer |
|
ASTM D 4969 : 2017 : R2022
|
Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
|
ASTM C 309 : 2019
|
Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete |
|
ASTM D 2857 : 2022
|
Standard Practice for Dilute Solution Viscosity of Polymers |
|
ASTM D 3294 : 2022
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
|
ASTM D 5379/D5379M : 2019 : EDT 1
|
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
|
ASTM D 2238 : 2022
|
Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1 |
|
ASTM D 7137/D7137M : 2017
|
Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates |
|
ASTM D 1929 : 2020
|
Standard Test Method for Determining Ignition Temperature of Plastics |
|
ASTM D 1896/D1896M : 2010 : R2017
|
Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds |
|
ASTM D 5687/D5687M : 2020
|
Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
|
ASTM D 542 : 2022
|
Standard Test Method for Index of Refraction of Transparent Organic Plastics |
|
ASTM D 5870 : 2022
|
Standard Practice for Calculating Property Retention Index of Plastics |
|
ASTM D 4754 : 2018
|
Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell |
|
ASTM D 7133 : 2021
|
Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids |
|
ASTM D 4321 : 2015
|
Standard Test Method for Package Yield of Plastic Film (Withdrawn 2024) |
|
ASTM D 3518/D3518M : 2018
|
Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate |
|
ASTM D 8033 : 2022
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
|
ASTM D 3641 : 2021
|
Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
|
ASTM D 7617/D7617M : 2011 : R2017
|
Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars |
|
ASTM D 5523 : 2021
|
Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
|
ASTM E 2015 : 2004 : R2021
|
Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination |
|
ASTM D 3981 : 2009 : REV A : R2016
|
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications |
|
ASTM C 613 : 2019
|
Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
|
ASTM D 2105 : 2001 : R2019
|
Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
|
ASTM D 6115 : 1997 : R2019
|
Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
|
ASTM D 2287 : 2019
|
Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
|
ASTM D 7078/D7078M : 2020 : EDT 1
|
Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method |
|
ASTM D 1603 : 2020
|
Standard Test Method for Carbon Black Content in Olefin Plastics |
|
ASTM D 2396 : 2020
|
Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer |
|
ASTM D 731 : 2022
|
Standard Test Method for Molding Index of Thermosetting Molding Powder |
|
ASTM D 5364 : 2014 : R2019
|
Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units |
|
ASTM D 7399 : 2018
|
Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry |
|
ASTM D 7958/D7958M : 2017
|
Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test |
|
ASTM D 8066/D8066M : 2017
|
Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates |
|
ASTM D 6289 : 2013 : R2019
|
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
|
ASTM D 6873/D6873M : 2019
|
Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates |
|
ASTM C1620 EDT 1 : 2016
|
Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
|
ASTM C 480/C480M : 2016
|
Standard Test Method for Flexure Creep of Sandwich Constructions |
|
ASTM D 1204 : 2014 : R2020
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
|
ASTM D 1636 : 2021
|
Standard Specification for Allyl Molding Compounds |
|
ASTM F 1741 : 2018
|
Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits |
|
ASTM D 7258 : 2017
|
Standard Specification for Polymeric Piles |
|
ASTM D 3965 : 2021
|
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
|
ASTM D 4673 : 2016
|
Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
|
ASTM D 3275 : 2018
|
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
|
ASTM D 4660 : 2018
|
Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate |
|
ASTM D 7487 : 2018
|
Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test |
|
ASTM D 3596 : 2019
|
Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins |
|
ASTM D 3531/D3531M : 2016
|
Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
|
ASTM D 6247 : 2018
|
Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry |
|
ASTM D 5025 : 2020 : REV A
|
Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials |
|
ASTM F 3336 : 2022
|
Standard Practice for Lipid Preconditioning of Ultra-High-Molecular-Weight Polyethylene for Accelerated Aging |
|
ASTM D 1622 : 2020
|
Standard Test Method for Apparent Density of Rigid Cellular Plastics |
|
ASTM D 8136 : 2017
|
Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge |
|
ASTM D 7615/D7615M : 2019
|
Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates |
|
ASTM D 8036 : 2016
|
Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI |
|
ASTM D 3419 : 2012 : R2019
|
Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds |
|
ASTM D 5685 : 2019
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
|
ASTM F 639 : 2009 : R2015
|
Standard Specification for Polyethylene Plastics for Medical Applications |
|
ASTM D 7475 : 2020
|
Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions |
|
ASTM D 4024 : 2022
|
Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
|
ASTM D 5224 : 2012 : R2019
|
Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds |
|
ASTM D 6338 : 2017
|
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
|
ASTM D 6954 : 2018
|
Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation |
|
ASTM D 7913/D7913M : 2014 : R2020
|
Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
|
ASTM D 4635 : 2016
|
Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications |
|
ASTM D 1712 : 2009 : R2020
|
Standard Practice for Resistance of Plastics to Sulfide Staining |
|
ASTM D 7486 : 2014
|
Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis |
|
ASTM C 1427 : 2021
|
Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
|
ASTM D 3262 : 2020
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
|
ASTM D 7250/D7250M : 2020
|
Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness |
|
ASTM D 6484/D6484M : 2020
|
Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates |
|
ASTM F 409 : 2022
|
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
|
ASTM D 1430 : 2022
|
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
|
ASTM F 2984 : 2013 : R2019
|
Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits |
|
ASTM D 4890 : 2018
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols |
|
ASTM D 2222 : 2019
|
Standard Test Method for Methanol Extract of Vinyl Chloride Resins |
|
ASTM D 695 : 2015
|
Standard Test Method for Compressive Properties of Rigid Plastics |
|
ASTM D 3529 : 2016 : R2021
|
Standard Test Methods for Constituent Content of Composite Prepreg |
|
ASTM D 3591 : 2022
|
Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |
|
ASTM D 635 : 2022
|
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
|
ASTM D 1203 : 2022
|
Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods |
|
ASTM D 1710 : 2015 : R2021
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
|
ASTM D 4101 : 2017 : EDT 1
|
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
|
ASTM D 7211 : 2013 : R2018
|
Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use |
|
ASTM D 4669 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols |
|
ASTM D 7823 : 2020
|
Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry |
|
ASTM D 4662 : 2020
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols |
|
ASTM D 4894 : 2019
|
Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
|
ASTM D 4526 : 2020
|
Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography |
|
ASTM D 3675 : 2022
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
|
ASTM D 8388/D8388M : 2022
|
Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions |
|
ASTM D 6953 : 2018
|
Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC) |
|
ASTM F 2169 : 2015 : R2020
|
Standard Specification for Resilient Stair Treads |
|
ASTM D 5229/D5229M : 2020
|
Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials |
|
ASTM D 7445 : 2018
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
|
ASTM D 2647 : 2018
|
Standard Specification for Crosslinkable Ethylene Plastics |
|
ASTM C 1029 : 2020
|
Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
|
ASTM C 1644 : 2006 : R2017
|
Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes |
|
ASTM D 2126 : 2020
|
Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
|
ASTM D 5528/D5528M : 2021
|
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
|
ASTM F 3182 : 2016
|
Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water |
|
ASTM D 5747/D5747M : 2021
|
Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
|
ASTM D 955 : 2021
|
Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics |
|
ASTM C 297/C297M : 2016
|
Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions |
|
ASTM D 2305 : 2018
|
Standard Test Methods for Polymeric Films Used for Electrical Insulation |
|
ASTM D7444 : 2018 : REV A
|
Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
|
|
ASTM D 5813 : 2004 : R2018
|
Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems |
|
ASTM D 5420 : 2021
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
|
ASTM D 4167 : 2021
|
Standard Specification for Fiber-Reinforced Plastic Fans and Blowers |
|
ASTM D 7136/D7136M : 2020
|
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event |
|
ASTM D 5975 : 2017
|
Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption |
|
ASTM D 5213 : 2019
|
Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications |
|
ASTM D 7336/D7336M : 2022
|
Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials |
|
ASTM C 591 : 2021
|
Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation |
|
ASTM D 3795 : 2020
|
Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer |
|
ASTM D 7568 : 2017
|
Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications |
|
ASTM D 2116 : 2016 : R2021
|
Standard Specification for FEP Resin Molding and Extrusion Materials |
|
ASTM F 628 : 2022
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core |
|
ASTM D 4756 : 2015 : R2021
|
Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit (Withdrawn 2023) |
|
ASTM D 3367 : 2021
|
Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force |
|
ASTM D 638 : 2022
|
Standard Test Method for Tensile Properties of Plastics |
|
ASTM D 5467/D5467M : 1997 : R2017
|
Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam |
|
ASTM E 631 : 2015
|
Standard Terminology of Building Constructions |
|
ASTM D 7711 : 2011 : R2015
|
Standard Guide for Description of Polymer Pellet Defects |
|
ASTM D 704 : 1999 : R2020
|
Standard Specification for Melamine-Formaldehyde Molding Compounds |
|
ASTM E 3202 : 2019 : EDT 1
|
Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics |
|
ASTM D 6213 : 2017
|
Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
|
ASTM C 945 : 2005 : R2017
|
Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels |
|
ASTM C 273/C273M : 2020
|
Standard Test Method for Shear Properties of Sandwich Core Materials |
|
ASTM D 1045 : 2019
|
Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics |
|
ASTM D 3753 : 2020
|
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells |
|
ASTM D 5926 : 2015 : R2020
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
|
ASTM D 4329 : 2021
|
Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics |
|
ASTM D 3835 : 2016
|
Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
|
ASTM D 5988 : 2018
|
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil |
|
ASTM D 8161 : 2017
|
Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight |
|
ASTM D 4634 : 2016 : R2022
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
|
ASTM D 6980 : 2017
|
Standard Test Method for Determination of Moisture in Plastics by Loss in Weight |
|
ASTM D 6641/D6641M : 2016 : EDT 2
|
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture |
|
ASTM D 5592 : 1994 : R2018
|
Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
|
ASTM D 7613 : 2017 : R2019
|
Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes |
|
ASTM D 4968 : 2019 : REV A
|
Standard Practice for Annual Review of Test Methods and Specifications for Plastics |
|
ASTM D 5206 : 2019
|
Standard Test Method for Windload Resistance of Rigid Plastic Siding |
|
ASTM D 2659 : 2016
|
Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers |
|
ASTM D 1593 : 2022
|
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting |
|
ASTM D 3801 : 2020 : REV A
|
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
|
ASTM F 3128 : 2019
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core |
|
ASTM D 4216 : 2022
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds |
|
ASTM D 5947 : 2018
|
Standard Test Methods for Physical Dimensions of Solid Plastics Specimens |
|
ASTM D 6098 : 2016
|
Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
|
ASTM F 1901 : 2022
|
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
|
ASTM D 3676 : 2018
|
Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay |
|
ASTM D 2463 : 2015
|
Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
|
ASTM D 5083 : 2017
|
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
|
ASTM D 5227 : 2021
|
Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins |
|
ASTM D 1895 : 2017
|
Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
|
ASTM D 2344/D2344M : 2022
|
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
|
ASTM D 4549 : 2015 : R2021
|
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
|
ASTM D 2383 : 2019
|
Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions |
|
ASTM D 1746 : 2015
|
Standard Test Method for Transparency of Plastic Sheeting |
|
ASTM C 394/C394M : 2016
|
Standard Test Method for Shear Fatigue of Sandwich Core Materials |
|
ASTM D 3517 : 2019
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
|
ASTM D 5155 : 2019
|
Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates |
|
ASTM D 1435 : 2020
|
Standard Practice for Outdoor Weathering of Plastics |
|
ASTM D 7210 : 2021
|
Standard Practice for Extraction of Additives in Polyolefin Plastics |
|
ASTM D 709 : 2017
|
Standard Specification for Laminated Thermosetting Materials |
|
ASTM D 7745 : 2019
|
Standard Practice for Testing Pultruded Composites |
|
ASTM D 3768 : 2022
|
Standard Test Method for Microcellular Urethanes—Flexural Recovery |
|
ASTM D 3748 : 2014 : R2019
|
Standard Practice for Evaluating High-Density Rigid Cellular Plastics |
|
ASTM D 6272 : 2017 : EDT 1
|
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
|
ASTM D 2992 : 2018
|
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
|
ASTM F 964 : 2013 : R2019
|
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing |
|
ASTM D 3982 : 2021
|
Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts |
|
ASTM F 2433 : 2005 : R2018
|
Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness |
|
ASTM E 1749 : 2018
|
Standard Terminology Relating to Rigid Wall Relocatable Shelters |
|
ASTM D 3576 : 2020
|
Standard Test Method for Cell Size of Rigid Cellular Plastics |
|
ASTM D 6262 : 2017
|
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
|
ASTM D 7083 : 2016 : R2022
|
Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography |
|
ASTM D 5477 : 2018
|
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR) |
|
ASTM D 6867 : 2019
|
Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
|
ASTM D 3410/D3410M : 2016 : EDT 1
|
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading |
|
ASTM E 1118/E1118M : 2016 : R2020
|
Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) |
|
ASTM D 8366 : 2021 : REV A
|
Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF |
|
ASTM D 1043 : 2016
|
Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test |
|
ASTM D 3892 : 2015 : R2020
|
Standard Practice for Packaging/Packing of Plastics |
|
ASTM D 1763 : 2000 : R2021
|
Standard Specification for Epoxy Resins |
|
ASTM F 2686 : 2014
|
Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe (Withdrawn 2023) |
|
ASTM F 1344 : 2021 : REV A
|
Standard Specification for Rubber Floor Tile |
|
ASTM D 1562 : 2022
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
|
ASTM D 5017 : 2017
|
Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance |
|
ASTM D 4883 : 2018
|
Standard Test Method for Density of Polyethylene by the Ultrasound Technique |
|
ASTM D 3123 : 2009 : R2017
|
Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds |
|
ASTM D 7766/D7766M : 2016
|
Standard Practice for Damage Resistance Testing of Sandwich Constructions |
|
ASTM D 3296 : 2014 : REV A : R2019
|
Standard Specification for FEP-Fluorocarbon Tube |
|
ASTM D 6389 : 2017
|
Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids |
|
ASTM D 6456 : 2010 : R2018
|
Standard Specification for Finished Parts Made from Polyimide Resin |
|
ASTM D 6866 : 2022
|
Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis |
|
ASTM D 2517 : 2018
|
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
|
ASTM D 494 : 2011(R2019)
|
Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products |
|
ASTM D 5205 : 2016
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
|
ASTM D 4161 : 2014 : R2019
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
|
ASTM D 7473/D7473M : 2021
|
Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open System Aquarium Incubations |
|
ASTM E 1067/E1067M : 2018
|
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
|
ASTM C 534/C534M : 2020 : REV A
|
Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form |
|
ASTM D 5766/D5766M : 2011 : R2018
|
Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates |
|
ASTM D 4671 : 2021
|
Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols |
|
ASTM D 6585 : 2017 : R2022
|
Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 4812 : 2019 : EDT 1
|
Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
|
ASTM D 4477 : 2022
|
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
|
ASTM F 1668 : 2016 : R2022
|
Standard Guide for Construction Procedures for Buried Plastic Pipe |
|
ASTM D 4986 : 2022
|
Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials |
|
ASTM D 7474 : 2017
|
Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents |
|
ASTM D 4273 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols |
|
ASTM D 1525 : 2017 : EDT 1
|
Standard Test Method for Vicat Softening Temperature of Plastics |
|
ASTM D 7956/D7956M : 2016
|
Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen |
|
ASTM F 2977 : 2020
|
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
|
ASTM D 3465 : 2021
|
Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography |
|
ASTM D 7522/D7522M : 2021
|
Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates |
|
ASTM D 5576 : 2000 : R2021 : EDT 1
|
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR) |
|
ASTM D 570 : 2022
|
Standard Test Method for Water Absorption of Plastics |
|
ASTM D 7309 : 2021 : REV B
|
Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry |
|
ASTM D 2924 : 2012 : R2017
|
Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
|
ASTM D 5207 : 2020
|
Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials |
|
ASTM D 7337/D7337M : 2012 : R2019
|
Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars |
|
ASTM D 6041 : 2018
|
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
|
ASTM D 2997 : 2021
|
Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
|
ASTM D 7856 : 2021
|
Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space |
|
ASTM D 4659 : 2019
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates |
|
ASTM B 532 : 1985 : R2021
|
Standard Specification for Appearance of Electroplated Plastic Surfaces |
|
ASTM D 5336 : 2022
|
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials |
|
ASTM E 2639 : 2012 : R2018
|
Standard Test Method for Blast Resistance of Trash Receptacles |
|
ASTM E 2954 : 2015 : R2022
|
Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
|
ASTM D 3840 : 2019
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
|
ASTM D 4875 : 2018
|
Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols |
|
ASTM D 8195 : 2018
|
Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting |
|
ASTM D 7310 : 2021
|
Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors |
|
ASTM D 7472 : 2019
|
Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
|
ASTM D 4672 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols |
|
ASTM D 4274 : 2021
|
Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols |
|
ASTM F 755 : 2019
|
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants |
|
ASTM D 4441 : 2020
|
Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene |
|
ASTM D 5672/D5672M : 2022
|
Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique |
|
ASTM D 7027 : 2020
|
Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine |
|
ASTM F 1735 : 2021
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
|
ASTM D 618 : 2021
|
Standard Practice for Conditioning Plastics for Testing |
|
ASTM D 3012 : 2019
|
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven |
|
ASTM D 7082 : 2021
|
Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe |
|
ASTM F 997 : 2018
|
Standard Specification for Polycarbonate Resin for Medical Applications |
|
ASTM D 8436 : 2022
|
Standard Specification for Fluoropolymer-based Materials for Use for Encapsulation of Downhole Cable |
|
ASTM D 8427 : 2021
|
Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling |
|
ASTM D 6261 : 2014 : R2022
|
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
|
ASTM D 7471 : 2019
|
Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
|
ASTM D 7032 : 2021
|
Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
|
ASTM D 6691 : 2017
|
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum |
|
ASTM E 284 : 2017
|
Standard Terminology of Appearance |
|
ASTM D 5491 : 2008 : R2022
|
Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials |
|
ASTM D 4350 : 2016 : R2022
|
Standard Test Method for Corrosivity Index of Plastics and Fillers |
|
ASTM D 2115 : 2022
|
Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions |
|
ASTM F 2853 : 2010 : R2015
|
Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams |
|
ASTM D 4745 : 2019
|
Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods |
|
ASTM D 3014 : 2019 : REV A
|
Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position |
|
ASTM D 1708 : 2018
|
Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
|
ASTM D 5990 : 2020 : REV A
|
Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK) |
|
ASTM D 5575 : 2018
|
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
|
ASTM D 5419 : 2021
|
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
|
ASTM D 8132/D8132M : 2017
|
Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement |
|
ASTM D 4092 : 2021
|
Standard Terminology for Plastics: Dynamic Mechanical Properties |
|
ASTM D 6108 : 2019
|
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
|
ASTM D 6400 : 2021
|
Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities |
|
ASTM D 785 : 2008 : R2015
|
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials |
|
ASTM D 6742/D6742M : 2017
|
Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
|
ASTM D 2843 : 2022
|
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
|
ASTM D 6856/D6856M : 2003 : R2016
|
Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials |
|
ASTM D 3530 : 2020
|
Standard Test Method for Volatiles Content of Composite Material Prepreg |
|
ASTM D 4551 : 2022
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
|
ASTM D 6415/D6415M : 2022
|
Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
|
ASTM D 790 : 2017
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
|
ASTM D 7744/D7744M : 2020
|
Standard Test Methods for Tensile Testing of High Performance Polyethylene Films |
|
ASTM D 6290 : 2019
|
Standard Test Method for Color Determination of Plastic Pellets |
|
ASTM D 5338 : 2015 : R2021
|
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures |
|
ASTM F 1714 : 1996 : R2018
|
Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices |
|
ASTM D 4803 : 2018
|
Standard Test Method for Predicting Heat Buildup in PVC Building Products |
|
ASTM D 7791 : 2022
|
Standard Test Method for Uniaxial Fatigue Properties of Plastics |
|
ASTM D 5961/D5961M : 2017
|
Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates |
|
ASTM D 2990 : 2017
|
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
|
ASTM D 5596 : 2003 : R2021
|
Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics |
|
ASTM D 5421 : 2015
|
Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
|
ASTM D 4020 : 2018
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials |
|
ASTM D 6576 : 2020
|
Standard Specification for Flexible Cellular Rubber Chemically Blown |
|
ASTM D 3769 : 2020
|
Standard Test Method for Microcellular Urethanes—High-Temperature Sag |
|
ASTM D 6778 : 2020
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
|
ASTM D 3159 : 2022
|
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
|
ASTM D 706 : 2020
|
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
|
ASTM D 7031 : 2011 : R2019
|
Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
|
ASTM D 3030 : 2017
|
Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins |
|
ASTM F 1483 : 2017
|
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
|
ASTM D 4802 : 2016
|
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
|
ASTM D 4895 : 2018
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
|
ASTM F 1860 : 2021 : REV A
|
Standard Specification for Rubber Sheet Floor Covering With Backing |
|
ASTM D 1056 : 2020
|
Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
|
ASTM E 1922/E1922M : 2022
|
Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials |
|
ASTM D 5948 : 2005 : R2020
|
Standard Specification for Molding Compounds, Thermosetting |
|
ASTM D 6110 : 2018
|
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics |
|
ASTM D 4000 : 2020
|
Standard Classification System for Specifying Plastic Materials |
|
ASTM F 2759 : 2019
|
Standard Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
|
ASTM D 5577 : 2019
|
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
|
ASTM D 1044 : 2019
|
Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser |
|
ASTM D 1600 : 2018
|
Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024) |
|
ASTM D 1623 : 2017
|
Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
|
ASTM D 2838 : 2018
|
Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting |
|
ASTM D 6342 : 2022
|
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy |
|
ASTM F 3078 : 2015
|
Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF) |
|
ASTM D 5630 : 2022
|
Standard Test Method for Ash Content in Plastics |
|
ASTM D 7705/D7705M : 2012 : R2019
|
Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
|
ASTM F 3041 : 2014 : R2019
|
Standard Specification for Bonded Rubber Crumb Floor Coverings |
|
ASTM D 8131/D8131M : 2017 : EDT 1
|
Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates |
|
ASTM D 4976 : 2012 : REV A : R2020
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
|
ASTM D 1786 : 2021
|
Standard Specification for Toluene Diisocyanate |
|
ASTM D 7905/D7905M : 2019 : EDT 1
|
Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
|
ASTM D 2863 : 2019
|
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
|
ASTM D 7292 : 2018
|
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) |
|
ASTM D 2235 : 2022
|
Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
|
ASTM D 3595 : 2014 : R2019 : EDT 1
|
Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film |
|
ASTM D 2661 : 2021
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
|
ASTM D 2996 : 2017
|
Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
|
ASTM D 256 : 2010 : R2018
|
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
|
ASTM D 4272/D4272M : 2015
|
Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop |
|
ASTM D 4255/D4255M : 2020
|
Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method |
|
ASTM C 1852 : 2020
|
Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives |
|
ASTM D 6712 : 2017
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
|
ASTM D 5132 : 2020
|
Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles |
|
ASTM F 412 : 2021
|
Standard Terminology Relating to Plastic Piping Systems |
|
ASTM F 1417 : 2011 : REV A : R2019 : EDT 1
|
Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air |
|
ASTM D 3420 : 2021
|
Standard Test Method for Pendulum Impact Resistance of Plastic Film |
|
ASTM D 6436 : 2014 : R2022
|
Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers |
|
ASTM D 6865 : 2017
|
Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials |
|
ASTM D 7248/D7248M : 2021
|
Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens |
|
ASTM D 5989 : 2018
|
Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA) |
|
ASTM D 8067/D8067M : 2017
|
Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture |
|
ASTM D 3354 : 2021
|
Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
|
ASTM D 5930 : 2017
|
Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
|
ASTM D 5071 : 2006 : R2021
|
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
|
ASTM D 5138 : 2016
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
|
ASTM D 882 : 2018
|
Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
|
ASTM D 6671/D6671M : 2022
|
Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
|
ASTM D 4801 : 2008 : R2016
|
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater |
|
ASTM D 3754 : 2019
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
|
ASTM D 5296 : 2019
|
Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
|
ASTM D 3368 : 2017 : R2022
|
Standard Specification for FEP Sheet and Film |
|
ASTM D 7616/D7616M : 2011 : R2017
|
Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures |
|
ASTM D 4349 : 2022
|
Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
|
ASTM G 143 : 2003 : R2018
|
Standard Test Method for Measurement of Web/Roller Friction Characteristics |
|
ASTM F 1173 : 2001 : R2018
|
Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
|
ASTM D 4385 : 2019
|
Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products |
|
ASTM D 3678 : 2019
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
|
ASTM D 6358 : 2019 : EDT 1
|
Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods |
|
ASTM D 2343 : 2017
|
Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics |
|
ASTM D 6226 : 2021
|
Standard Test Method for Open Cell Content of Rigid Cellular Plastics |
|
ASTM D 8101/D8101M : 2018
|
Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile |
|
ASTM D 1822 : 2021
|
Standard Test Method for Determining the Tensile-Impact Resistance of Plastics |
|
ASTM D 7254 : 2021
|
Standard Specification for Polypropylene (PP) Siding |
|
ASTM D 6099 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
|
ASTM E 2771 : 2011 : R2019
|
Standard Terminology for Homeland Security Applications |
|
ASTM F 2207 : 2006 : R2019
|
Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe |
|
ASTM D 8069 : 2017 : REV A
|
Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending |
|
ASTM D 5526 : 2018
|
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions |
|
ASTM F 17 : 2020
|
Standard Terminology Relating to Primary Barrier Packaging |
|
ASTM D 5323 : 2019 : REV A
|
Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes |
|
ASTM F 1698 : 2021
|
Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
|
ASTM D 8349 : 2021
|
Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints Between Different Materials for the Production of End Items or Parts that are Intended to be Disassembled and/or Reassembled |
|
ASTM D 6835 : 2017
|
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
|
ASTM D 2582 : 2021
|
Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
|
ASTM D 6437 : 2022
|
Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols) |
|
ASTM D 3489 : 2017
|
Standard Test Methods for Microcellular Urethane Materials |
|
ASTM D 7252 : 2022
|
Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates |
|
ASTM D 6150 : 2016
|
Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
|
ASTM D 3222 : 2021
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
|
ASTM D 3295 : 2020
|
Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
|
ASTM D 3171 : 2022
|
Standard Test Methods for Constituent Content of Composite Materials |
|
ASTM D 1938 : 2019
|
Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method |
|
ASTM D 4226 : 2019 : EDT 1
|
Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products |
|
ASTM D 5422 : 2017
|
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer |
|
ASTM D 6100 : 2017
|
Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
|
ASTM D 3826 : 2018
|
Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
|
ASTM D 1239 : 2022 : REV A
|
Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals |
|
ASTM D 5740 : 2018
|
Standard Guide for Writing Material Standards in the Classification D4000 Format |
|
ASTM D 6343 : 2014 : R2018
|
Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications |
|
ASTM D 4218 : 2020
|
Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique |
|
ASTM F 1861 : 2021
|
Standard Specification for Resilient Wall Base |
|
ASTM D 1505 : 2018
|
Standard Test Method for Density of Plastics by the Density-Gradient Technique |
|
ASTM D 5397 : 2020
|
Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
|
ASTM D 8065/D8065M : 2016
|
Standard Classification System and Basis for Specification for Specifying Plastic Films |
|
ASTM D 1755 : 2021
|
Standard Specification for Poly(Vinyl Chloride) Resins |
|
ASTM C 363/C363M : 2016
|
Standard Test Method for Node Tensile Strength of Honeycomb Core Materials |
|
ASTM D 6988 : 2021
|
Standard Guide for Determination of Thickness of Plastic Film Test Specimens |
|
ASTM D 3681 : 2018
|
Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
|
ASTM D 7264/D7264M : 2021
|
Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
|
ASTM D 543 : 2021
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
|
ASTM D 8337/D8337M : 2021
|
Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test |
|
ASTM D 6112 : 2018
|
Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes |
|
ASTM F 2634 : 2015 : R2021
|
Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method |
|
ASTM D 1238 : 2020
|
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
|
ASTM D 4495 : 2021
|
Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
|
ASTM F 732 : 2017
|
Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses |
|
ASTM D 3364 : 1999 : R2019
|
Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications |
|
ASTM D 4661 : 2018
|
Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates |
|
ASTM C 1847 : 2021
|
Standard Specification for Direct Buried Pre-Insulated and Jacketed Polyurethane Bonded Low Temperature Hot Water Piping Systems |
|
ASTM D 5677 : 2017
|
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
|
ASTM D 3479/D3479M : 2019
|
Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials |
|
ASTM D 4663 : 2020
|
Flameproof restrained plugs |
|
ASTM D 6979 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen |
|
ASTM D 3850 : 2019
|
Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA) |
|
ASTM D 2732 : 2014 : R2020
|
Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting |
|
ASTM D 4203 : 2017
|
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
|
ASTM F 1760 : 2016 : R2020
|
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |