ASTM C 471M : 2020 : REV A : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
Hardcopy , PDF
10-04-2024
English
05-05-2021
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 11
|
| DocumentType |
Test Method
|
| Pages |
18
|
| ProductNote |
ε1NOTE—The title of Table 2 was editorially corrected in May 2021.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the chemical analysis of gypsum and gypsum panel products, including gypsum ready-mixed plaster, gypsum wood-fibered plaster, and gypsum concrete.
1.2These test methods appear in the following order:
| Sections | ||
| Preparation of Sample | 4 | |
| Complete Procedure | 5 – 16 | |
| Alternative Procedure for Analysis of Free Water in | 17 | |
| Gypsum Using a Moisture Balance | ||
| Alternative Procedure for Analysis of Combined Water in | 18 | |
| Gypsum Using a Moisture Balance | ||
| Alternative Procedure for Analysis of Organic Material | 19 | |
| and Carbon Dioxide in Gypsum by High Temperature | ||
| Weight Loss | ||
| Alternative Procedure for Analysis for Calcium Sulfate by | 20 | |
| Ammonium Acetate Method | ||
| Alternative Procedure for Analysis for Sodium Chloride by | 21 | |
| the Coulometric Method | ||
| Determination of Sand in Set Plaster | 22 | |
| Wood-fiber Content in Wood-fiber Gypsum Plaster | 23 | |
| Optional Procedure for Analysis for Sodium by the Atomic | 24 | |
| Absorption Method | ||
| Optional Procedure for Analysis for Sodium by Flame | 25 | |
| Photometry | ||
| Determination of Orthorhombic Cyclooctasulfur (S8) in | 26 | |
| Ggypsum Panel Products—General Provisions | ||
| Determination of Orthorhombic Cyclooctasulfur (S8) in | 27 | |
| Gypsum Panel Products by Gas Chromatograph | ||
| Equipped with a Mass Spectrometer (GS/MS) | ||
| Determination of Orthorhombic Cyclooctasulfur (S8) in | 28 | |
| Gypsum Panel Products by Gas Chromatograph | ||
| Equipped with an Electron Capture Detector (GC/ECD) | ||
| Determination of Orthorhombic Cyclooctasulfur (S8) in | 29 | |
| Gypsum Panel Products by High-performance Liquid | ||
| Chromatograph Equipped with and Ultraviolet Detector | ||
| (HPLC/UV) |
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in these test methods.
1.4These text of this test method references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 452 : 2021 | Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate |
| ASTM C 22/C22M : 2000 : R2021 | Standard Specification for Gypsum |
| ASTM C 563 : 2020 | Standard Guide for Approximation of Optimum SO<inf>3</inf> in Hydraulic Cement |
| ASTM C 61/C61M : 2000 : R2020 | Standard Specification for Gypsum Keene's Cement |
| ASTM D 8155 : 2017 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
| ASTM D 34 : 2008 : R2019 | Standard Guide for Chemical Analysis of White Pigments |
| ASTM C 452 : 2019 : EDT 1 | Standard Test Method for Potential Expansion of Portland-Cement<brk/> Mortars Exposed to Sulfate |
| ASTM C 22/C22M : 2000 : R2015 | Standard Specification for Gypsum |
| ASTM C 59/C59M : 2000 : R2020 | Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM C 28/C28M : 2010 : R2020 | Standard Specification for Gypsum Plasters |
| ASTM C 1396/C1396M : 2017 | Standard Specification for Gypsum Board |
| ASTM C 35 : 2001(R2019) | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM D 3987 : 2012 : R2020 | Standard Practice for Shake Extraction of Solid Waste with Water |
| ASTM D 34 : 2008 : R2023 | Standard Guide for Chemical Analysis of White Pigments |
| ASTM D 8155 : 2017 : R2023 | Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water |
| ASTM E 3355 : 2023 | Standard Guide for Characterization of Coal Combustion Products (CCPs) in Storage Area(s) for Beneficial Use |
| ASTM E 11 : 2020 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM C 11 : 2023 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM E 11 : 2022 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM C 778 : 2017 | Standard Specification for Standard Sand |
| ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM C 11 : 2018 : REV B | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM D 1428 : 1982 : EDT 1 | Methods of Test for Sodium and Potassium in Water and Water-Formed Deposits by Flame Photometry |
| ASTM E 691 : 2021 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM C 778 : 2021 | Standard Specification for Standard Sand |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.