ASTM C 496/C496M : 2017 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
English
01-10-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 04.02, 2017 Defines the determination of the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores.
| Committee |
C 09
|
| DevelopmentNote |
Supersedes ASTM C 496 (03/2004)
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This test method covers the determination of the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4The text of this standard references notes that provide explanatory material. These notes shall not be considered as requirements of the standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1144 : 1989 : R1997 | Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms |
| ACI 376 : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES AND COMMENTARY |
| AASHTO LRFDLTS 1 : 1900 | LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS |
| ACI 365.1R : 2017 | REPORT ON SERVICE LIFE PREDICTION |
| ACI 503.7 : 2007 | SPECIFICATION FOR CRACK REPAIR BY EPOXY INJECTION |
| AASHTO TP 96 : 2013 | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| AASHTO T 24M/T 24 : 1900 | METHOD OF TEST FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
| ACI 544.8R : 2016 | REPORT ON INDIRECT METHOD TO OBTAIN STRESS-STRAIN RESPONSE OF FIBER-REINFORCED CONCRETE (FRC) |
| AASHTO PP 73 : 2013 : R2015 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ASTM C 1604/C1604M : 2005 : R2012 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
| ASTM C 796 : 2004 | Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam |
| ASTM C 42/C 42M : 2016-10 | TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
| ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
| ASTM C 1604/C1604M : 2005 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ACI 376M : 2011 | CODE REQUIREMENTS FOR DESIGN AND CONSTRUCTION OF CONCRETE STRUCTURES FOR THE CONTAINMENT OF REFRIGERATED LIQUEFIED GASES (METRIC) |
| DKD-R 3-5 :2018 | PRACTICE FOR QUALITY ASSURANCE, JOB SITE QUALITY CONTROL, AND REAPPLICATION OF PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ACI 369R : 2011 | GUIDE FOR SEISMIC REHABILITATION OF EXISTING CONCRETE FRAME BUILDINGS AND COMMENTARY |
| ACI ITG-8R : 2010 | REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
| ACI 544.7R : 2016 | REPORT ON DESIGN AND CONSTRUCTION OF FIBER-REINFORCED PRECAST CONCRETE TUNNEL SEGMENTS |
| ASCE/SEI 41 13 : 2014 | SEISMIC EVALUATION AND RETROFIT OF EXISTING BUILDINGS |
| ASTM C 1176/C1176M : 2013 : REDLINE | Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table |
| ICC IEBC CODE AND COMMENTARY : 2015 | IEBC® Code and Commentary |
| ACI 330R : 2008 | GUIDE FOR THE DESIGN AND CONSTRUCTION OF CONCRETE PARKING LOTS |
| AASHTO TP 96 : 2013 (R2018) | METHOD OF TEST FOR PROTECTIVE SEALERS FOR PORTLAND CEMENT CONCRETE |
| ACI 325.14R : 2017 | GUIDE FOR DESIGN AND PROPORTIONING OF CONCRETE MIXTURES FOR PAVEMENTS |
| ACI 369.1M : 2017 | STANDARD REQUIREMENTS FOR SEISMIC EVALUATION AND RETROFIT OF EXISTING CONCRETE BUILDINGS (ACI 369.1M-17) AND COMMENTARY |
| ACI 364.3R : 2009 | GUIDE FOR CEMENTITIOUS REPAIR MATERIAL DATA SHEET |
| ACI 364.1R : 2007 | GUIDE FOR EVALUATION OF CONCRETE STRUCTURES PRIOR TO REHABILITATION |
| ACI 207.5R : 2011 | REPORT ON ROLLER-COMPACTED MASS CONCRETE |
| ACI MNL 3 : 0 | GUIDE TO THE CODE FOR ASSESSMENT, REPAIR, AND REHABILITATION OF EXISTING CONCRETE STRUCTURES |
| ASTM D 7705/D7705M : 2012 | Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
| ASTM C 1144 : 1989 : R2011 | Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms (Withdrawn 2018) |
| ACI 318M : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318M-14) AND COMMENTARY (ACI 318RM-14) |
| ASTM C 1144 : 1989 : R2004 | Standard Test Method for Splitting Tensile Strength for Brittle Nuclear Waste Forms |
| ASTM C 1435/C1435M : 2014 : REDLINE | Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer |
| ASTM C 1176 : 2005 | Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table |
| ASTM C 796/C796M : 2012 : REDLINE | Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam |
| CSA A23.1 A23.2 : 2014 | CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
| ASTM C 42/C 42M : 2016-10 | TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
| ASTM C 192/C192M : 2016-04 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
| ASTM C 670 : 2015 : REDLINE | Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.