AASHTO T 196M/T 196 : 1900
|
METHOD OF TEST FOR AIR CONTENT OF FRESHLY MIXED CONCRETE BY THE VOLUMETRIC METHOD |
ASTM D 3205 : 1986 : R1991
|
Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer (Withdrawn 2000) |
AASHTO T 185 : 2011
|
METHOD OF TEST FOR EARLY STIFFENING OF HYDRAULIC CEMENT (MORTAR METHOD) |
ASTM D 2950/D2950M : 2014 : REDLINE
|
Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods |
AASHTO T 336 : 2015(R2019)
|
METHOD OF TEST FOR COEFFICIENT OF THERMAL EXPANSION OF HYDRAULIC CEMENT CONCRETE |
ASTM D 994 : 1998 : R2003
|
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
AASHTO TP 95 : 2014
|
METHOD OF TEST FOR SURFACE RESISTIVITY INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE ION PENETRATION |
API 10 : 1990
|
SPECIFICATION FOR MATERIALS AND TESTING FOR WELL CEMENTS |
ASTM C 1603 : 2016 : REDLINE
|
Standard Test Method for Measurement of Solids in Water |
ASTM C 136/C136M : 2014 : REDLINE
|
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM D 632 : 2012
|
Standard Specification for Sodium Chloride |
ASTM D 994 : 1998 : R2010
|
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
AASHTO T 166 : 2013
|
METHOD OF TEST FOR BULK SPECIFIC GRAVITY (G[MB]) OF COMPACTED ASPHALT MIXTURES USING SATURATED SURFACE-DRY SPECIMENS |
ASTM D 5581 : 2007 : REV A : EDT 1
|
Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
ASTM C 1090/C1090M : 2015 : REDLINE
|
Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout |
AASHTO TP 81 : 2012 : R2015
|
METHOD OF TEST FOR DETERMINING AGGREGATE SHAPE PROPERTIES BY MEANS OF DIGITAL IMAGE ANALYSIS |
AASHTO M 33 : 1999 : R2012
|
SPECIFICATION FOR PREFORMED EXPANSION JOINT FILLER FOR CONCRETE (BITUMINOUS TYPE) |
AASHTO T 98M/T 98 : 2012(R2016)
|
METHOD OF TEST FOR FINENESS OF PORTLAND CEMENT BY THE TURBIDIMETER |
ASTM C 827 : 2001 : REV A
|
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
CSA A3000 : 2013
|
CEMENTITIOUS MATERIALS COMPENDIUM |
AASHTO T 24M/T 24 : 1900
|
METHOD OF TEST FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
ASTM D 1557 : 2012
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
ASTM D 7113/D7113M : 2010
|
Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods |
ASTM E 2916 : 2013
|
Standard Terminology for Digital and Multimedia Evidence Examination |
AASHTO T 48 : 2006 : R2010
|
METHOD OF TEST FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP |
ASTM D 6607 : 2000
|
Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
ASTM C 1252 : 2017
|
Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
ASTM C 1708/C1708M : 2016 : REDLINE
|
Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements |
ASTM C 823/C823M : 2012
|
Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
ASTM C 1556 : 2011 : REV A
|
Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
ASTM C 136 : 2006
|
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM C 512/C512M : 2015 : REDLINE
|
Standard Test Method for Creep of Concrete in Compression |
ASTM D 7552 : 2009
|
Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer |
ASTM C 1427 : 2016 : REDLINE
|
Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
ASTM C 497 : 2018-02
|
TEST METHODS FOR CONCRETE PIPE, MANHOLE SECTIONS, OR TILE |
ASTM C 1556 : 2011
|
Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
ASTM C 1064/C1064M : 2017 : REDLINE
|
Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
ASTM C 827 : 2001
|
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
ASTM D 7175 : 2015 : REDLINE
|
Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
ASTM C 1579 : 2013 : REDLINE
|
Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) |
ASTM D 4125/D4125M : 2010
|
Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
ASTM C 593 : 2006
|
Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization |
ASTM C 1356 : 2007 : R2012
|
Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure |
ASTM C 918/C918M : 2013 : REDLINE
|
Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
ASTM D 994 : 1998
|
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
ASTM C 805 : 2002
|
Standard Test Method for Rebound Number of Hardened Concrete |
ASTM C 535 : 2016 : REDLINE
|
Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
ASTM D 2042 : 2015 : REDLINE
|
Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene |
ASTM C 1067 : 2012 : REDLINE
|
Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials |
ASTM D 7405 : 2015 : REDLINE
|
Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer |
ASTM C 1240 : 2015 : REDLINE
|
Standard Specification for Silica Fume Used in Cementitious Mixtures |
ASTM C 186 : 2017 : REDLINE
|
Standard Test Method for Heat of Hydration of Hydraulic Cement |
ASTM C 1152/C1152M : 2004 : R2012 : EDT 1
|
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
ASTM D 6816:2011
|
Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders |
ASTM C 1138 : 1997
|
Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) |
ASTM D 6607 : 2000 : R2009
|
Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
ASTM D 6928 : 2017 : REDLINE
|
Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM C 1792 : 2014
|
Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes (Withdrawn 2023) |
ASTM C 70 : 2013 : REDLINE
|
Standard Test Method for Surface Moisture in Fine Aggregate |
ASTM D 5444 : 2015 : REDLINE
|
Standard Test Method for Mechanical Size Analysis of Extracted Aggregate |
ASTM C 302 : 2013 : R2017
|
Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM D 7552 : 2009 : R2014
|
Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer |
ASTM C 457/C457M : 2016 : REDLINE
|
Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete |
AASHTO T 30 : 2015
|
METHOD OF TEST FOR MECHANICAL ANALYSIS OF EXTRACTED AGGREGATE |
ASTM D 994/D994M : 2011
|
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
ASTM C 512 : 2002
|
Standard Test Method for Creep of Concrete in Compression |
AASHTO TP 119 : 2015(R2017)
|
METHOD OF TEST FOR ELECTRICAL RESISTIVITY OF A CONCRETE CYLINDER TESTED IN A UNIAXIAL RESISTANCE TEST |
ASTM D 6607 : 2000 : R2005
|
Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
ASTM D 2419 : 2014 : REDLINE
|
Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
ASTM C 496/C496M : 2017 : REDLINE
|
Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens |
ASTM C 827 : 2001 : REV A : R2005
|
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
ASTM C 1365 : 2006 : R2011
|
Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
AASHTO TP 110 : 2014
|
METHOD OF TEST FOR POTENTIAL ALKALI REACTIVITY OF AGGREGATES AND EFFECTIVENESS OF ASR MITIGATION MEASURES (MINIATURE CONCRETE PRISM TEST, MCPT) |
ASTM A 849 : 2015 : REDLINE
|
Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
ASTM D 3633 : 1998
|
Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems |
ASTM C 403/C403M : 2016 : REDLINE
|
Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
ASTM D 1075 : 2011 : REDLINE
|
TEST METHOD FOR EFFECT OF WATER ON COMPRESSIVE STRENGTH OF COMPACTED BITUMINOUS MIXTURES |
AASHTO PP 74 : 2013
|
PRACTICE FOR DETERMINATION OF SIZE AND ROUNDNESS OF GLASS BEADS USED IN TRAFFIC MARKINGS BY MEANS OF COMPUTERIZED OPTICAL METHOD |
AASHTO T 308 : 2010 : R2015
|
METHOD OF TEST FOR DETERMINING THE ASPHALT BINDER CONTENT OF HOT MIX ASPHALT (HMA) BY THE IGNITION METHOD |
AASHTO T 197M/T 197 : 1900
|
METHOD OF TEST FOR TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE |
AASHTO T 158 : 2011(R2019)
|
METHOD OF TEST FOR BLEEDING OF CONCRETE |
ASTM C 1150 : 1996
|
Standard Test Method for the Break-Off Number of Concrete (Withdrawn 2002) |
AASHTO T 318 : 2015(R2019)
|
METHOD OF TEST FOR WATER CONTENT OF FRESHLY MIXED CONCRETE USING MICROWAVE OVEN DRYING |
AASHTO T 158 : 2011 : R2015
|
METHOD OF TEST FOR BLEEDING OF CONCRETE |
AASHTO T 132 : 1987(R2018)
|
METHOD OF TEST FOR TENSILE STRENGTH OF HYDRAULIC CEMENT MORTARS |
ASTM C 566 : 2013 : REDLINE
|
TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
AASHTO T 316 : 2013
|
METHOD OF TEST FOR VISCOSITY DETERMINATION OF ASPHALT BINDER USING ROTATIONAL VISCOMETER |
AASHTO T 327 : 2012
|
METHOD OF TEST FOR RESISTANCE OF COARSE AGGREGATE TO DEGRADATION BY ABRASION IN THE MICRO-DEVAL APPARATUS |
AASHTO T 245 : 2015
|
METHOD OF TEST FOR RESISTANCE TO PLASTIC FLOW OF ASPHALT MIXTURES USING MARSHALL APPARATUS |
AASHTO T 315 : 2012
|
METHOD OF TEST FOR DETERMINING THE RHEOLOGICAL PROPERTIES OF ASPHALT BINDER USING A DYNAMIC SHEAR RHEOMETER (DSR) |
AASHTO T 84 : 2013
|
METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF FINE AGGREGATE |
AASHTO TP 92 : 2014
|
METHOD OF TEST FOR DETERMINING THE CRACKING TEMPERATURE OF ASPHALT BINDER USING THE ASPHALT BINDER CRACKING DEVICE (ABCD) |
AASHTO T 295 : 2013
|
METHOD OF TEST FOR SPECIFIC GRAVITY OR API GRAVITY OF LIQUID ASPHALTS BY HYDROMETER METHOD |
AASHTO T 308 : 2010
|
METHOD OF TEST FOR DETERMINING THE ASPHALT BINDER CONTENT OF HOT MIX ASPHALT (HMA) BY THE IGNITION METHOD |
ASTM C 1747/C1747M : 2013 : REDLINE
|
Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion |
ASTM D 5779/D5779M : 2014 : REDLINE
|
Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control |
ASTM C 1524 :2002
|
Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
ASTM D 1557 : 2012 : EDT 1
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) |
ASTM D 1883 : 2016 : REDLINE
|
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
ASTM D 5143 : 2006
|
Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography |
ASTM C 1137 : 2005
|
Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011) |
ASTM C 117 : 2017 : REDLINE
|
Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
ASTM C 302 : 2013
|
Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM C 1105 : 2008 : REV A : R2016
|
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
ASTM C 1524 : 2002 : REV A
|
Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
ASTM D 427 : 2004
|
Test Method for Shrinkage Factors of Soils by the Mercury Method (Withdrawn 2008) |
ASTM C 827/C827M : 2016 : REDLINE
|
Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures |
ASTM C 823 : 2000
|
Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
ASTM C 127 : 2015 : REDLINE
|
Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate |
ASTM C 78/C78M : 2018 : REDLINE
|
Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
ASTM D 5581 : 2007
|
Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
ASTM C 42/C 42M : 2016-10
|
TEST METHOD FOR OBTAINING AND TESTING DRILLED CORES AND SAWED BEAMS OF CONCRETE |
ASTM C 873/C873M : 2015 : REDLINE
|
Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
ASTM D 3289 : 2017 : REDLINE
|
Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method) |
ASTM D 994/D994M : 2011 : R2016
|
Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) |
ASTM C 1608 : 2017 : REDLINE
|
Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste |
ASTM D 5249 : 2010 : R2016
|
Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
TP 127 : 2017
|
METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY DENSITY OF ASPHALT BINDER USING THE BINDER FRACTURE ENERGY (BFE) TEST |
ASTM C 1079 : 1987 : R1992 : EDT 1
|
Test Methods for Determining the Water Content of Freshly Mixed Concrete (Withdrawn 1998) |
AASHTO T 164 : 2014(R2018)
|
Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) |
AASHTO T 358 : 2015
|
METHOD OF TEST FOR SURFACE RESISTIVITY INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE ION PENETRATION |
ASTM C 495/C495M : 2012 : REDLINE
|
Standard Test Method for Compressive Strength of Lightweight Insulating Concrete |
ASTM D 7428 : 2015 : REDLINE
|
Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus |
ASTM D 3142 : 2005
|
Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method |
ASTM C 1604/C1604M : 2005
|
Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
ASTM D 3155 : 2011 : REDLINE
|
Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures |
ASTM D 5249 : 2010
|
Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints |
ASTM C 1604/C1604M : 2005 : R2012
|
Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
AASHTO T 240 : 2013
|
METHOD OF TEST FOR EFFECT OF HEAT AND AIR ON A MOVING FILM OF ASPHALT BINDER (ROLLING THIN-FILM OVEN TEST) |
ASTM D 4125/D4125M : 2010 : R2016
|
Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
AASHTO T 198 : 2015(R2019)
|
Standard Method of Test for Splitting Tensile Strength of Cylindrical Concrete Specimens
|
AASHTO R 59 : 2011 : R2015
|
PRACTICE FOR RECOVERY OF ASPHALT BINDER FROM SOLUTION BY ABSON METHOD |
AASHTO T 48 : 2006 : R2015
|
METHOD OF TEST FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP |
ASTM D 1074 : 2017 : REDLINE
|
Standard Test Method for Compressive Strength of Asphalt Mixtures |
ACI ITG-8R : 2010
|
REPORT ON PERFORMANCE-BASED REQUIREMENTS FOR CONCRETE |
AASHTO T 71 : 2008 : R2012
|
METHOD OF TEST FOR EFFECT OF ORGANIC IMPURITIES IN FINE AGGREGATE ON STRENGTH OF MORTAR |
AASHTO T 209 : 2012
|
METHOD OF TEST FOR THEORETICAL MAXIMUM SPECIFIC GRAVITY (G[MM]) AND DENSITY OF HOT MIX ASPHALT (HMA) |
ASTM D 7370/D7370M : 2014 : REDLINE
|
Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
ASTM C 1365 : 2006
|
Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis |
AASHTO T 314 : 2012
|
METHOD OF TEST FOR DETERMINING THE FRACTURE PROPERTIES OF ASPHALT BINDER IN DIRECT TENSION (DT) |
AASHTO T 104 : 1999
|
METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
AASHTO T 255 : 2000
|
METHOD OF TEST FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
AASHTO T 85 : 2014
|
STANDARD METHOD OF TEST FOR SPECIFIC GRAVITY AND ABSORPTION OF COARSE AGGREGATE |
AASHTO R 59 : 2011
|
PRACTICE FOR RECOVERY OF ASPHALT BINDER FROM SOLUTION BY ABSON METHOD |
AASHTO T 303 : 2000
|
METHOD OF TEST FOR ACCELERATED DETECTION OF POTENTIALLY DELETERIOUS EXPANSION OF MORTAR BARS DUE TO ALKALI-SILICA REACTION |
AASHTO T 265 : 2015
|
METHOD OF TEST FOR LABORATORY DETERMINATION OF MOISTURE CONTENT OF SOILS |
AASHTO T 37 : 2007 : R2011
|
METHOD OF TEST FOR SIEVE ANALYSIS OF MINERAL FILLER FOR HOT MIX ASPHALT (HMA) |
AASHTO T 19M/T 19 : 1900
|
METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE |
AASHTO T 167 : 2010 : R2015
|
METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT |
AASHTO T 27 : 2014
|
METHOD OF TEST FOR SIEVE ANALYSIS OF FINE AND COARSE AGGREGATES |
ASTM C 87 : 2005
|
Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
ASTM D 6927 : 2015 : REDLINE
|
Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
ASTM C 823/C823M : 2012 : R2017
|
Standard Practice for Examination and Sampling of Hardened Concrete in Constructions |
ASTM C 1260 : 2014 : REDLINE
|
Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
ASTM D 546 : 2017 : REDLINE
|
Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
ASTM C 1105 : 2008
|
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
ASTM D 5581 : 2007 : REV A : R2013
|
Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
ASTM C 1151 : 1991
|
Standard Test Method for Evaluating the Effectiveness of Materials for Curing Concrete (Withdrawn 2000) |
ASTM D 2939 : 2003
|
Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012) |
ASTM C 666/C666M : 2015 : REDLINE
|
Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing |
ASTM C 779/C779M : 2012 : REDLINE
|
Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces |
ASTM C 995 : 2001
|
Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone (Withdrawn 2008) |
ASTM C 188 : 2017 : REDLINE
|
Standard Test Method for Density of Hydraulic Cement |
ASTM D 3042 : 2017 : REDLINE
|
Standard Test Method for Insoluble Residue in Carbonate Aggregates |
ASTM C 1152/C1152M:2004
|
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
ASTM C 1152/C1152M : 2004 : EDT 1
|
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete |
ASTM D 3142/D3142M : 2017 : REDLINE
|
Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method |
ASTM C 873 : 2004
|
Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
ASTM D 2041 : 2003 : REV A
|
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM D 5143 : 2006 : R2015 : EDT 1
|
Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023) |
ASTM D 1856 : 2009
|
Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
AASHTO T 154 : 2015
|
METHOD OF TEST FOR TIME OF SETTING OF HYDRAULIC CEMENT PASTE BY GILLMORE NEEDLES |
AASHTO T 11 : 2005 : R2013
|
METHOD OF TEST FOR MATERIALS FINER THAN 75-[MU]M (NO. 200) SIEVE IN MINERAL AGGREGATES BY WASHING |
ASTM D 6816 : 2011 : R2016
|
Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders |
AASHTO T 119M/T 119 : 1900
|
METHOD OF TEST FOR SLUMP OF HYDRAULIC CEMENT CONCRETE |
ASTM A 1081/A1081M : 2015 : REDLINE
|
Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand |
AASHTO T 276 : 2015
|
METHOD OF TEST FOR MEASURING EARLY-AGE COMPRESSION STRENGTH AND PROJECTING LATER-AGE STRENGTH |
CSA A23.1 A23.2 : 2014
|
CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE |
AASHTO T 157 : 2012(R2016)
|
Standard Method of Test for Air-Entraining Admixtures for Concrete
|
ASTM C 928/C928M : 2013 : REDLINE
|
Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
ASTM C 115 : 2010
|
Standard Test Method for Fineness of Portland Cement by the Turbidimeter |
ASTM C 1218/C1218M : 2017 : REDLINE
|
Standard Test Method for Water-Soluble Chloride in Mortar and Concrete |
AASHTO T 106M/T 106 : 1900
|
METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS) |
AASHTO TP 81 : 2012
|
METHOD OF TEST FOR DETERMINING AGGREGATE SHAPE PROPERTIES BY MEANS OF DIGITAL IMAGE ANALYSIS |
ASTM D 7115 : 2010
|
Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
AASHTO T 260 : 1997(R2016)
|
METHOD OF TEST FOR SAMPLING AND TESTING FOR CHLORIDE ION IN CONCRETE AND CONCRETE RAW MATERIALS |
ASTM D 5581 : 2007 : REV A
|
Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen) |
ASTM C 593 : 2006 : R2011
|
Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization |
ASTM C 87/C87M : 2017 : REDLINE
|
Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
AASHTO PP 74 : 2013 : R2015
|
PRACTICE FOR DETERMINATION OF SIZE AND ROUNDNESS OF GLASS BEADS USED IN TRAFFIC MARKINGS BY MEANS OF COMPUTERIZED OPTICAL METHOD |
AASHTO T 88 : 2013
|
METHOD OF TEST FOR PARTICLE SIZE ANALYSIS OF SOILS |
AASHTO M 33 : 1999
|
SPECIFICATION FOR PREFORMED EXPANSION JOINT FILLER FOR CONCRETE (BITUMINOUS TYPE) |
ASTM C 513 : 2011
|
Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength |
AASHTO T 100 : 2015
|
METHOD OF TEST FOR SPECIFIC GRAVITY OF SOILS |
AASHTO M 190 : 2000
|
SPECIFICATION FOR ASPHALT-COATED CORRUGATED METAL CULVERT PIPE AND PIPE-ARCHES |
ASTM D 5143 : 2006 : R2010 : EDT 1
|
Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography |
AASHTO T 71 : 2008 : R2012
|
METHOD OF TEST FOR EFFECT OF ORGANIC IMPURITIES IN FINE AGGREGATE ON STRENGTH OF MORTAR |
ASTM C 190 : 1985
|
Method of Test for Tensile Strength of Hydraulic Cement Mortars (Withdrawn 1990) |
AASHTO T 167 : 2010
|
METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT |
AASHTO T 280 : 2014
|
METHOD OF TEST FOR CONCRETE PIPE, MANHOLE SECTIONS, OR TILE |
ASTM C 1018 : 1997
|
Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006) |
ASTM C 1078 : 1987 : R1992 : EDT 1
|
Test Methods for Determining the Cement Content of Freshly Mixed Concrete (Withdrawn 1998) |
ASTM D 6607 : 2000 : R2015
|
Standard Practice for Inclusion of Precision Statement Variation in Specification Limits |
ASTM C 1506 : 2017 : REDLINE
|
Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters |
ASTM C 1138M : 2012 : REDLINE
|
Standard Test Method for Abrasion Resistance of Concrete (Underwater Method) |
ASTM D 139 : 2016 : REDLINE
|
Standard Test Method for Float Test for Bituminous Materials |
ASTM C 802 : 2014 : REDLINE
|
Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials |
ASTM C 1556 : 2011 : REV A : R2016
|
Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion |
ASTM C 39/C39M : 2018 : REDLINE
|
Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
AASHTO T 178 : 2015(R2019)
|
METHOD OF TEST FOR PORTLAND-CEMENT CONTENT OF HARDENED HYDRAULIC-CEMENT CONCRETE |
ASTM D 6084/D6084M : 2013-12
|
TEST METHOD FOR ELASTIC RECOVERY OF ASPHALT MATERIALS BY DUCTILOMETER |
ASTM C 1872 : 2018
|
Standard Test Method for Thermogravimetric Analysis of Hydraulic Cement |
ASTM C 128 : 2015 : REDLINE
|
Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
ACI 214.4R : 2010
|
GUIDE FOR OBTAINING CORES AND INTERPRETING COMPRESSIVE STRENGTH RESULTS |
AASHTO M 307 : 2013(R2017)
|
SPECIFICATION FOR SILICA FUME USED IN CEMENTITIOUS MIXTURES |
ASTM D 7113/D7113M : 2010 : R2016
|
Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods |
ASTM C 174/C174M : 2017 : REDLINE
|
Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores |
ASTM C 1356 : 2007
|
Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure |
AASHTO T 277 : 2015(R2019)
|
METHOD OF TEST FOR ELECTRICAL INDICATION OF CONCRETE'S ABILITY TO RESIST CHLORIDE ION PENETRATION |
ASTM D 1856 : 2009 : R2015
|
Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
AASHTO T 210 : 2015
|
METHOD OF TEST FOR AGGREGATE DURABILITY INDEX |
ASTM D 7115 : 2010 : R2015
|
Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
AASHTO T 153 : 2013(R2017)
|
METHOD OF TEST FOR FINENESS OF HYDRAULIC CEMENT BY AIR PERMEABILITY APPARATUS |
ASTM D 6723 : 2012
|
Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2021) |
AASHTO TP 118 : 2015
|
METHOD OF TEST FOR CHARACTERIZATION OF THE AIR-VOID SYSTEM OF FRESHLY MIXED CONCRETE BY THE SEQUENTIAL PRESSURE METHOD |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 2172 : 2005
|
Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures |
ASTM C 1567 : 2013 : REDLINE
|
Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
ASTM C 806 : 2013-02
|
TEST METHOD FOR RESTRAINED EXPANSION OF EXPANSIVE CEMENT MORTAR |
ASTM D 2041 : 2003
|
Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
ASTM E 2883 : 2013
|
Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME) |
ASTM C 88 : 2013-08
|
TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
ASTM D 4125 : 2005
|
Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
ASTM C 1105 : 2008 : REV A
|
Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
ASTM C 173/C173M : 2016 : REDLINE
|
Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
ASTM D 6511/D6511M : 2011-07
|
TEST METHODS FOR SOLVENT BEARING BITUMINOUS COMPOUNDS |
ASTM C 900 : 2015 : REDLINE
|
Standard Test Method for Pullout Strength of Hardened Concrete |
ASTM C 1524 : 2002 : REV A : R2010
|
Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) (Withdrawn 2019) |
ASTM C 131/C131M : 2014 : REDLINE
|
Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
ASTM D 113 : 2017
|
Standard Test Method for Ductility of Asphalt Materials |
ASTM D 6390 : 2011
|
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM D 6390 : 2011 : R2017
|
Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures |
ASTM C 215 : 2014 : REDLINE
|
Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens |
ASTM D 7172 : 2014 : REDLINE
|
Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared |
ASTM G 180 : 2013 : REDLINE
|
TEST METHOD FOR CORROSION INHIBITING ADMIXTURES FOR STEEL IN CONCRETE BY POLARIZATION RESISTANCE IN CEMENTITIOUS SLURRIES |
ASTM C 1245/C1245M : 2012 : REDLINE
|
Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test) |
ASTM C 918 : 2002
|
Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |