• There are no items in your cart

ASTM C 717 : 2024

Current

Current

The latest, up-to-date edition.

Standard Terminology of Building Seals and Sealants

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-05-2024

1.1This standard describes terms and definitions and descriptions of terms used in test methods, specifications, guides, and practices (related to building seals and sealants) consistent with the scope and areas of interest of ASTM Committee C24.

1.2Definitions and descriptions of terms are written to ensure that building seals and sealants standards are properly understood and interpreted.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 24
DocumentType
Reference Material
Pages
14
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM C 732 : 2017 : R2022 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM D 5926 : 2015 : R2020 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM C 719 : 2022 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C 1183/C1183M : 2013 : R2018 Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM C 1016 : 2014 : R2022 Standard Test Method for Determination of Water Absorption of Sealant Backing<brk/> (Joint Filler) Material
ASTM C 1564 : 2020 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
ASTM C 1536 : 2019 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
ASTM C 716 : 2006 : R2020 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
ASTM C 864 : 2005 : R2019 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
ASTM C 1487 : 2019 Standard Guide for Remedying Structural Silicone Glazing
ASTM C 907 : 2017 : R2018 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C 1501 : 2023 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
ASTM C 1481 : 2012 : R2017 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
ASTM C 1193 : 2016 : R2023 Standard Guide for Use of Joint Sealants
ASTM D 2203 : 2001 : R2023 Standard Test Method for Staining from Sealants
ASTM E 2690 : 2022 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
ASTM C 1265 : 2022 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
ASTM C 782 : 2013 : R2023 Standard Test Method for Softness of Preformed Tape Sealants
ASTM E 2649 : 2020 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM D 996 : 2023 Standard Terminology of Packaging and Distribution Environments
ASTM C 961 : 2015 : R2024 Standard Test Method for Lap Shear Strength of Sealants
ASTM E 2203 : 2014 : R2018 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
ASTM C 908 : 2015 : R2024 Standard Test Method for Yield Strength of Preformed Tape Sealants
ASTM D 6497/D6497M : 2002 : R2021 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
ASTM C 1266 : 2017 : R2024 Standard Test Method for Flow Characteristics of Preformed Tape Sealants
ASTM C 910 : 2016 : R2021 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
ASTM C 765 : 2023 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM C 736 : 2012 : R2022 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
ASTM C 1305/C1305M : 2016 : R2023 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
ASTM C 1253 : 2014 : R2019 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
ASTM C 794 : 2018 : R2022 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM D 2202 : 2000 : R2023 Standard Test Method for Slump of Sealants
ASTM C 1375 : 2000 : R2020 Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM C 1115 : 2017 : R2022 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
ASTM D 3667 : 2016 : R2022 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
ASTM C 898/C898M : 2009 : R2024 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
ASTM C 963 : 2000 : R2021 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
ASTM C 712 : 2022 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 1471/C1471M : 2022 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C 1241 : 2014 : R2022 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
ASTM C 879 : 2003 : R2019 Standard Test Methods for Release Papers Used with Preformed Tape Sealants
ASTM C 1852 : 2020 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
ASTM C 920 : 2018 Standard Specification for Elastomeric Joint Sealants
ASTM C 1021 : 2008 : R2023 Standard Practice for Laboratories Engaged in Testing of Building Sealants
ASTM C 1083 : 2006 : R2020 : EDT 1 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM C 1087 : 2023 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 639 : 2015 : R2020 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C 1306/C1306M : 2008 : R2023 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
ASTM C 1521 : 2019 : R2020 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
ASTM D 3903 : 2015 : R2022 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
ASTM C 792 : 2023 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C 1127/C1127M : 2015 : R2023 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
ASTM C 711 : 2022 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C 1643 : 2014 : R2020 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
ASTM E 2112 : 2023 Standard Practice for Installation of Exterior Windows, Doors and Skylights
ASTM E 2190 : 2019 Standard Specification for Insulating Glass Unit Performance and Evaluation
ASTM C 1294 : 2020 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
ASTM C 1216/C1216M : 2023 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C 1401 : 2023 Standard Guide for Structural Sealant Glazing
ASTM C 1851 : 2018 : R2023 Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus
ASTM C 1248 : 2022 Standard Test Method for Staining of Porous Substrate by Joint Sealants
ASTM D 3771 : 2015 : R2022 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
ASTM C 1642 : 2020 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
ASTM C 1281 : 2016 : R2023 Standard Specification for Preformed Tape Sealants for Glazing Applications
ASTM C 1681 : 2023 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM E 2269 : 2021 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM C 1311 : 2022 Standard Specification for Solvent Release Sealants
ASTM D 2452 : 2015(R2019) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
ASTM C 510 : 2016 : R2022 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM C 1166 : 2021 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM C 1518 : 2022 Standard Specification for Precured Elastomeric Silicone Joint Sealants
ASTM C 661 : 2015 : R2022 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C 1850 : 2017 : R2021 Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems
ASTM C 1367 : 2019 : R2023 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM C 1135 : 2019 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
ASTM E 241 : 2020 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM C 734 : 2015 : R2019 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
ASTM C 1756 : 2017 : REV A Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs
ASTM C 1806 : 2021 Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants
ASTM E 2189 : 2019 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
ASTM C 1519 : 2010 : R2022 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 1246 : 2017 : R2022 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C 603 : 2014 : R2019 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C 1392 : 2020 Standard Guide for Evaluating Failure of Structural Sealant Glazing
ASTM C 509 : 2006 : R2021 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing<brk/> Material
ASTM E 2266 : 2022 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
ASTM C 772 : 2003 : R2019 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
ASTM D 5747/D5747M : 2021 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
ASTM C 1442 : 2014 : R2021 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM D 2377 : 2014 : R2019 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
ASTM C 681 : 2014 : R2019 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
ASTM C 834 : 2017 : R2023 Standard Specification for Latex Sealants
ASTM C 771 : 2014 : R2019 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
ASTM C 1369 : 2019 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
ASTM C 679 : 2015 : R2022 Standard Test Method for Tack-Free Time of Elastomeric Sealants
ASTM C 1472 : 2016 : R2022 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
ASTM C 1620 : 2016 : R2023 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
ASTM E 2188 : 2019 Standard Test Method for Insulating Glass Unit Performance
ASTM C 1249 : 2018 : R2023 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
ASTM C 1184 : 2023 Standard Specification for Structural Silicone Sealants
ASTM C 972 : 2024 Standard Test Method for Compression-Recovery of Tape Sealant
ASTM C 1330 : 2023 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
ASTM C 793 : 2023 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM C 1520 : 2020 Standard Guide for Paintability of Latex Sealants
ASTM C 1382 : 2016 : R2023 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C 1815 : 2017 : R2021 Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension
ASTM D 2453 : 2015 : R2020 : EDT 1 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM C 1635 : 2022 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
ASTM C 1522 : 2005 : R2021 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
ASTM C 1247 : 2020 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C 731 : 2015 : R2022 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C 1737 : 2024 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
ASTM C 1735 : 2017 : R2021 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM C 1523 : 2017 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
ASTM E 3157 : 2023 Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems
ASTM C 1394 : 2020 Standard Guide for In-Situ Structural Silicone Glazing Evaluation
ASTM C 1589/C1589M : 2018 : R2023 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
ASTM C 1257 : 2015 : R2023 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

View more information
€64.38
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.