ASTM C 844 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
Hardcopy , PDF
08-07-2021
English
07-04-2015
This specification covers the minimum requirements for, and methods of, application of gypsum veneer base for gypsum veneer plasters.
Committee |
C 11
|
DocumentType |
Standard
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers the minimum requirements for, and methods of, application of gypsum veneer base for gypsum veneer plasters.
1.2Gypsum veneer base shall not be used as a base for direct adhesive application of ceramic, metal, or plastic tile in areas exposed to abnormal moisture or humidity or temperature.
1.3Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.
1.4Where a specific degree of sound control is required for veneer plaster assemblies and constructions, details of construction shall be in accordance with official reports of tests conducted in recognized sound testing laboratories in accordance with the applicable sound tests, Test Methods C423, E90, or E492.
1.5Where this specification is more stringent (size or thickness of framing; spacing of fasteners) than the fire-rated construction, this specification shall govern; otherwise, the construction described in the fire test report shall govern.
1.6Unheated spaces above gypsum veneer base ceilings shall be properly ventilated (see Appendix X3).
1.7The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only.
1.8The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
ASTM C 843 : 2017 | Standard Specification for Application of Gypsum Veneer Plaster |
ASTM C 1396/C1396M : 2017 | Standard Specification for Gypsum Board |
ICC IBC INTERNATIONAL BUILDING CODE:2021 | International Building Code |
ASTM C 1002 : 2018 | Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
ASTM C 1047 : 2014 : REV A : R2019 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1546 : 2002 : R2008 : EDT 1 | Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems |
ASTM C 1047 : 2010 : REV A | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1002 : 2014 | Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
ASTM C 1002 : 2001 | Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
ASTM C 1546 : 2002 : R2014 | Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems |
ASTM C 1007 : 2008 : REV A | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1047 : 2014 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1007 : 2011 : REV A : R2015 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1007 : 2020 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1007 : 2011 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1002 : 2007 | Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
ASTM C 1047 : 2019 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1007 : 2004 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1007 : 2008 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1047 : 2004 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1047 : 2005 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1546 : 2002 | Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems |
ASTM C 1002 : 2007 : R2013 | Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
ASTM C 1047 : 2009 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1047 : 2010 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1002 : 2004 | Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
ASTM C 1007 : 2011 : REV A | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1002 : 2016 | Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
ASTM C 1007 : 2000 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
ASTM C 1047 : 2014 : REV A | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1047 : 1999 | Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base |
ASTM C 1002 : 2000 | Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.