• Shopping Cart
    There are no items in your cart

ASTM D 1125 : 2014

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Methods for Electrical Conductivity and Resistivity of Water (Withdrawn 2023)

Available format(s)

Hardcopy , PDF

Superseded date

20-04-2023

Superseded by

ASTM D 1125 : 2023

Language(s)

English

Published date

17-03-2014

€67.30
Excluding VAT

Committee
D 19
DocumentType
Test Method
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1These test methods cover the determination of the electrical conductivity and resistivity of water. The following test methods are included:

Range

Sections

Test Method A—Field and Routine Laboratory

10 to 200 000

12 to 18

 Measurement of Static (Non-Flowing) Samples

 μS/cm

Test Method B—Continuous In-Line Measure

5 to 200 000

19 to 23

 ment

 μS/cm


1.2These test methods have been tested in reagent water. It is the user's responsibility to ensure the validity of these test methods for waters of untested matrices.

1.3For measurements below the range of these test methods, refer to Test Method D5391.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 4266 : 2017 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
ASTM F 76 : 2008 : R2016 : EDT 1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors (Withdrawn 2023)
ASTM B 679 : 1998 : R2015 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM C 1663 : 2018 Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test
ASTM E 1943 : 1998 : R2015 Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites (Withdrawn 2024)
ASTM D 5091 : 1995 : R2014 Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications (Withdrawn 2023)
ASTM D 7513 : 2017 Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
ASTM D 4519 : 2016 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D 5012 : 2001 : R2013 Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM D 7285 : 2006 : R2017 Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
ASTM D 6764 : 2002 : R2013 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
ASTM D 6807 : 2017 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from<brk/>2 to 100 μS/cm
ASTM D 6504 : 2011 : R2016 : EDT 1 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
ASTM D 4472 : 2008 : R2014 Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems (Withdrawn 2023)
ASTM D 7100 : 2011 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM E 574 : 2019 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM D 5298 : 2016 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
ASTM B 984 : 2012 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
ASTM D 8006 : 2016 Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
ASTM G 205 : 2016 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
ASTM D 5196 : 2006 : R2018 Standard Guide for Bio-Applications Grade Water
ASTM D 3087 : 2017 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
ASTM A 657/A657M : 2018 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
ASTM D 4399 : 2005 : R2017 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D 6529 : 2011 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50<span class='unicode'>–</span>1000 <span class='unicode'>μ</span>S/cm (Withdrawn 2020)
ASTM B 488 : 2018 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses
ASTM A 630 : 2016 : REV A : EDT 1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
ASTM D 2651 : 2001 : R2016 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
ASTM D 4194 : 2003 : R2014 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
ASTM D 5131 : 1990 : R2014 Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems (Withdrawn 2023)
ASTM D 4874 : 1995 : R2014 Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021)
ASTM D 5744 : 2018 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 5391 : 2014 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023)
ASTM C 225 : 1985 : R2014 Standard Test Methods for Resistance of Glass Containers to Chemical Attack
ASTM D 7283 : 2017 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM A 623 : 2016 Standard Specification for Tin Mill Products, General Requirements
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 1755 : 2015 Standard Specification for Poly(Vinyl Chloride) Resins
ASTM D 4194 : 2023 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
ASTM D 5615 : 2021 Standard Practice for Operating Characteristics of Home Reverse Osmosis Devices
ASTM D 1755 : 2021 Standard Specification for Poly(Vinyl Chloride) Resins
ASTM A 623 : 2022 Standard Specification for Tin Mill Products, General Requirements
ASTM G 96 : 1990 : R2018 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
ASTM B 984 : 2012 : R2020 : EDT 1 Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use
ASTM F 1701 : 2012 : R2018 Standard Specification for Unused Rope with Special Electrical Properties
ASTM D 6529 : 2022 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm
ASTM D 5615 : 2020 Standard Test Method for Operating Characteristics of Home Reverse Osmosis Devices
ASTM D 3375 : 2018 Standard Test Method for Column Capacity of Particulate Mixed Bed Ion<brk/>Exchange Materials
ASTM D 5012 : 2020 Standard Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM D 7100 : 2011 : R2020 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D 6764 : 2002 : R2019 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
ASTM B 679 : 1998 : R2021 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM C 225 : 1985 : R2022 Standard Test Methods for Resistance of Glass Containers to Chemical Attack

ASTM D 4519 : 2016 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 2003 Standard Terminology Relating to Water
ASTM D 1129 : 2013 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
ASTM D 2777 : 2012 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM E 2251 : 2007 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 2186 : 2005 : R2009 Standard Test Methods for Deposit-Forming Impurities in Steam (Withdrawn 2014)
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM E 2251 : 2003 : REV A Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 1129 : 2006 Standard Terminology Relating to Water
ASTM D 2777 : 2003 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D 2777 : 2021 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 1066 : 2018 Standard Practice for Sampling Steam
ASTM D 3370 : 2010 Standard Practices for Sampling Water from Closed Conduits
ASTM D 2777 : 2013 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 1066 : 2006 Standard Practice for Sampling Steam
ASTM E 2251 : 2003 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 1066 : 2018 : EDT 1 Standard Practice for Sampling Steam
ASTM E 2251 : 2014 : R2021 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 2777 : 1998 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D 3370 : 2008 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 1999 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2006 : REV A Standard Terminology Relating to Water
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 5391 : 1999 : R2005 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 2186 : 2005 Standard Test Methods for Deposit-Forming Impurities in Steam
ASTM D 5391 : 1999 : R2009 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 1129 : 2003 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2002 Standard Terminology Relating to Water
ASTM E 2251 : 2010 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 1066 : 1997 : R2001 Standard Practice for Sampling Steam
ASTM E 2251 : 2011 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM E 2251 : 2014 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
ASTM D 5391 : 2014 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample (Withdrawn 2023)
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 1066 : 2011 Standard Practice for Sampling Steam
ASTM D 1129 : 2004 Standard Terminology Relating to Water
ASTM D 2777 : 2008 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 1192 : 1998 Standard Guide for Equipment for Sampling Water and Steam in Closed Conduits (Withdrawn 2003)
ASTM D 4519 : 1994 : R2005 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D 2777 : 2006 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 2186 : 1984 : R2005 Standard Test Methods for Deposit-Forming Impurities in Steam
ASTM D 3370 : 2018 Standard Practices for Sampling Water from Flowing Process Streams
ASTM D 1129 : 2002 : REV A Standard Terminology Relating to Water
ASTM D 4519 : 2010 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D 3370 : 1976 Standard Practices for Sampling Water
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 Standard Practices for Sampling Water from Closed Conduits
ASTM D 2186 : 1984 : R1999 : EDT 1 Standard Test Methods for Deposit-Forming Impurities in Steam
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 1129 : 2010 Standard Terminology Relating to Water
ASTM D 4519 : 1994 : R1999 : EDT 1 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
ASTM D 3370 : 2007 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 2006 : REV A : EDT 1 Standard Terminology Relating to Water
ASTM D 5391 : 1999 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D 1129 : 2001 Standard Terminology Relating to Water
ASTM D 1129 : 2004 : EDT 1 Standard Terminology Relating to Water
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 2777 : 2008 : EDT 1 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.