ASTM D 1125 : 2023
Current
The latest, up-to-date edition.
Standard Test Methods for Electrical Conductivity and Resistivity of Water
Hardcopy , PDF
English
17-04-2023
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 19
|
| DocumentType |
Test Method
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover the determination of the electrical conductivity and resistivity of water. The following test methods are included:
| Range | Sections | |
| Test Method A—Field and Routine Laboratory | 10 to 200 000 | 12 to 18 |
| Measurement of Static (Non-Flowing) Samples | μS/cm | |
| Test Method B—Continuous In-Line Measure | 5 to 200 000 | 19 to 23 |
| ment | μS/cm |
1.2These test methods have been tested in reagent water. It is the user's responsibility to ensure the validity of these test methods for waters of untested matrices.
1.3For measurements below the range of these test methods, refer to Test Method D5391.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM A 623 : 2022 | Standard Specification for Tin Mill Products, General Requirements |
| ASTM G 96 : 1990 : R2018 | Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) |
| ASTM D 4266 : 2017 | Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins |
| ASTM D 1755 : 2021 | Standard Specification for Poly(Vinyl Chloride) Resins |
| ASTM F 76 : 2008 : R2016 : EDT 1 | Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors (Withdrawn 2023) |
| ASTM D 2651 : 2001 : R2016 | Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding |
| ASTM D 7100 : 2011 : R2020 | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
| ASTM D 5744 : 2018 | Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
| ASTM C 1663 : 2018 | Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test |
| ASTM D 6764 : 2002 : R2019 | Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels |
| ASTM E 1943 : 1998 : R2015 | Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites (Withdrawn 2024) |
| ASTM D 6504 : 2011 : R2016 : EDT 1 | Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water |
| ASTM D 4399 : 2005 : R2017 | Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths |
| ASTM F 1701 : 2012 : R2018 | Standard Specification for Unused Rope with Special Electrical Properties |
| ASTM D 3375 : 2018 | Standard Test Method for Column Capacity of Particulate Mixed Bed Ion<brk/>Exchange Materials |
| ASTM E 574 : 2019 | Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation |
| ASTM D 3087 : 2017 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM B 679 : 1998 : R2021 | Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
| ASTM C 225 : 1985 : R2022 | Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
| ASTM B 488 : 2018 | Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
| ASTM D 4194 : 2023 | Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices |
| ASTM A 630 : 2016 : REV A : EDT 1 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate |
| ASTM D 5298 : 2016 | Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper |
| ASTM D 5615 : 2021 | Standard Practice for Operating Characteristics of Home Reverse Osmosis Devices |
| ASTM D 8006 : 2016 | Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations |
| ASTM G 205 : 2016 | Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils |
| ASTM D 5196 : 2006 : R2018 | Standard Guide for Bio-Applications Grade Water |
| ASTM D 7513 : 2017 | Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges |
| ASTM D 4519 : 2016 | Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity |
| ASTM D 7285 : 2006 : R2017 | Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems |
| ASTM D 5012 : 2020 | Standard Practice for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
| ASTM D 6529 : 2022 | Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50 μS/cm to 1000 μS/cm |
| ASTM D 7283 : 2017 | Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting |
| ASTM D 6807 : 2017 | Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from<brk/>2 to 100 μS/cm |
| ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
| ASTM A 657/A657M : 2018 | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced |
| ASTM B 984 : 2012 : R2020 : EDT 1 | Standard Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use |
| ASTM D 5391 : 2023 | Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.