ASTM D 1141 : 1998 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for the Preparation of Substitute Ocean Water
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
03-02-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 11.02, 2015 Defines the preparation of solutions containing inorganic salts in proportions and concentrations representative of ocean water.
| Committee |
D 19
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This specification covers the preparation of solutions containing inorganic salts in proportions and concentrations representative of ocean water.
Note 1-Since the concentrations of ocean water varies with sampling location, the gross concentration employed herein is an average of many reliable individual analyses. Trace elements, occurring naturally in concentrations below 0.005 mg/L, are not included.1.2 This specification provides three stock solutions, each relatively concentrated but stable in storage. For preparation of substitute ocean water, aliquots of the first two stock solutions, with added salt, are combined in larger volume. An added refinement in adjustment of heavy-metal concentration is provided by the addition of a small aliquot of the third stock solution to the previous solution.
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.>
| MIL F 0024385 : E | FIRE EXTINGUISHING AGENT, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| MIL H 24135 : B | HOSE, SYNTHETIC RUBBER, WIRE REINFORCED AND END FITTINGS, REUSABLE, FOR FLEXIBLE HOSE ASSEMBLIES |
| DOD P 24648 : 0 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| PD ISO/TS 17920:2015 | Fibre ropes for offshore stationkeeping. Aramid |
| MIL I 24728 : A | INTERCONNECTION BOX, FIBER OPTIC, METRIC, GENERAL SPECIFICATION FOR |
| ISO/TS 20787:2017 | Nanotechnologies - Aquatic toxicity assessment of manufactured nanomaterials in saltwater lakes using Artemia sp. Nauplii |
| PD ISO/TS 19336:2015 | Fibre ropes for offshore station keeping. Polyarylate |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| DIN EN ISO 15589-2 E : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| A-A-3120 Base Document:1997 | PAINT: FOR SWIMMING POOLS |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
| BS EN ISO 10416:2009 | Petroleum and natural gas industries. Drilling fluids. Laboratory testing |
| MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| MIL-DTL-24050 Revision F:2018 | Rope, Fibrous, Double-Braided (Nylon) |
| MIL-DTL-32027 Base Document:1998 | Generator, Gas, Dry Bay Fire Extinguisher, GGU-15A/A |
| MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
| ASTM G 170 : 2006 : R2012 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| MIL-PRF-32577 Base Document:2017 | Coating System, Nonskid, Metallic Thermal Spray Application |
| MIL-DTL-16884 Revision P:2017 | FUEL, NAVAL DISTILLATE |
| MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
| MIL R 24050 : D | ROPE, FIBROUS, DOUBLE-BRAIDED (NYLON) |
| MIL D 24613 : 0 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
| S.R. CEN/TS 15119-2:2012 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - PART 2: WOODEN COMMODITIES EXPOSED IN USE CLASS 4 OR 5 (IN CONTACT WITH THE GROUND, FRESH WATER OR SEA WATER) - LABORATORY METHOD |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| ASTM G 39 : 1999 : R2016 | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens |
| ASTM G 185 : 2006 : R2016 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM G 202 : 2012 : R2016 | Standard Test Method for Using Atmospheric Pressure Rotating Cage |
| ASTM D 6903 : 2007 : R2013 | Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water |
| ASTM G 202 : 2012 | Standard Test Method for Using Atmospheric Pressure Rotating Cage |
| ASTM G 170 :2006 | Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory |
| ASTM D 6442 : 2006 : R2012 | Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water |
| ASTM G 39 : 1999 : R2005 | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens |
| NFPA 18A : 2017 | WATER ADDITIVES FOR FIRE CONTROL AND VAPOR MITIGATION |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| UNE-EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
| CEN/TS 15119-2:2012 | Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method |
| MIL-PRF-85045 Revision G:2014 | Cables, Fiber Optic, General Specification for |
| MIL-PRF-32271 Revision A:2014 | Non-Rechargeable, Lithium General Specification for |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-DTL-24640 Revision C:2011 | CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| MIL-PRF-32440 Base Document:2013 | COATINGS, CHIP-, IMPACT-, WEAR-, AND ABRASION-RESISTANT |
| NF EN ISO 15181-1 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 1: GENERAL METHOD FOR EXTRACTION OF BIOCIDES |
| SAE J1942_201406 | Hose and Hose Assemblies for Marine Applications |
| DOD-F-24610 Base Document:1982 | FIXANT, HOLD DOWN |
| ISO 15840:2004 | Ships and marine technology Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| CSA S808 : 2014 | SPECIFICATION FOR FIBRE-REINFORCED POLYMER (FRP) MATERIALS FOR EXTERNALLY REINFORCING STRUCTURES |
| MIL-R-24750 Base Document:1990 | ROPE, FIBROUS, SINGLE-BRAIDED |
| ASTM D 2777 : 2013 : REDLINE | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM G 44 :1999 | Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution |
| ASTM E 1597 : 2010 | Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| 12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| MIL R 24337 : A | ROPE, NYLON, PLAITED |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| MIL G 10924 : F | GREASE, AUTOMOTIVE AND ARTILLERY |
| ASTM D 6903:2007 | Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water |
| MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
| SSPC-PAINT 29 : 2014 | ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
| MIL-PRF-32407 Revision A:2016 | MOUNTS, RESILIENT (SURFACE SHIP APPLICATION) |
| MIL-C-24217 Revision A:1984 | CONNECTOR, ELECTRICAL, DEEP SUBMERGENCE, SUBMARINE |
| MIL B 17901 : B | BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED |
| MIL-DTL-24677 Revision C:2017 | Rope, Fibrous - Double-Braided (Polyester) |
| ASTM F 1511 : 2016-11 | SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS |
| MIL R 24677 : A | ROPE, FIBROUS, DOUBLE-BRAIDED (POLYESTER) |
| BS 3900-K1(2001) : 2001 AMD 15245 | METHODS OF TEST FOR PAINTS - GROUP K: DETERMINATION OF RELEASE RATES OF BIOCIDES FROM ANTIFOULING PAINTS - PART K1: GENERAL METHOD FOR EXTRACTION OF BIOCIDES |
| SAE AMSF24610A | Fixant, Hold Down |
| MIL R 24049 : B | ROPE, POLYPROPYLENE |
| MIL-STD-1344 Revision A:1977 | TEST METHODS FOR ELECTRICAL CONNECTORS |
| MIL-PRF-24049 Revision C:2015 | ROPE, POLYPROPYLENE |
| DOD D 24577 : 0 | DISTILLER SCALE PREVENTIVE TREATMENT FORMULATIONS |
| MIL H 24595 : NOTICE 2 | HOSE, WIRE REINFORCED LARGE DIAMETER WITH REUSABLE END FITTINGS FOR FLEXIBLE CONNECTIONS |
| MIL-DTL-82935 Base Document:1996 | CARTRIDGE, IMPULSE, CCU-132/A |
| DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) |
| MIL-PRF-32538 Base Document:2015 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE, NATO CODE NUMBER: O-165 |
| ASTM G 39 : 1999 : R2011 | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens |
| I.S. EN ISO 10416:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
| AWWA C504 : 2015 | RUBBER-SEATED BUTTERFLY VALVES |
| AWWA C516 : 2014 | LARGE-DIAMETER RUBBER-SEATED BUTTERFLY VALVES, SIZES 78 IN. (2,000 MM) AND LARGER |
| NACE TM 01 03 : 2003 | LABORATORY TEST PROCEDURES FOR EVALUATION OF SOHIC RESISTANCE OF PLATE STEELS USED IN WET H[2]S SERVICE |
| ASTM E 1924 : 1997 : R2004 | Standard Guide for Conducting Toxicity Tests with Bioluminescent Dinoflagellates |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| ASTM G 41 : 1990 : R2018 | Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| ASTM E 1597 : 2010 : R2015 | Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments |
| ASTM D 5108 : 1990 : R2002 | Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water |
| ASTM D 1183 : 2003 : R2019 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D 7258 : 2017 | Standard Specification for Polymeric Piles |
| ASTM E 1681 : 2003 : R2013 | Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
| ASTM G 44 : 1999 : R2005 | Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution |
| ASTM D 7781 : 2014 | Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase (Withdrawn 2023) |
| ASTM E 1924 : 1997 | Standard Guide for Conducting Toxicity Tests with Bioluminescent Dinoflagellates |
| I.S. EN ISO 15181-1:2007 | PAINTS AND VARNISHES - DETERMINATION OF RELEASE RATE OF BIOCIDES FROM ANTIFOULING PAINTS - PART 1: GENERAL METHOD FOR EXTRACTION OF BIOCIDES |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| UNI EN ISO 15589-2 : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| ASTM F 1511 : 2018 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| 14/30266785 DC : 0 | BS EN ISO 16773-4 - PAINTS AND VARNISHES - ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON HIGH-IMPEDANCE COATED SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED SPECIMENS |
| BS ISO 15589-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| 10/30232896 DC : 0 | BS ISO 15589-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| ASTM G 85 : 2011 | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM E 3078/E3078M : 2019 | Standard Practice for Conditioning of Hard Armor Test Items |
| NACE TM 04 04 : 2004 | Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation<br> |
| MIL-PRF-32232 Base Document:2006 | Universal Joint, Right Angle, Offset, Shipboard Use |
| MIL L 0046010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-B-29186 Base Document:1978 | BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION) |
| MIL-PRF-8516 Revision G:1997 | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
| BS ISO 10416 : 2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
| UNE-EN ISO 16773-4:2017 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017) |
| MIL-DTL-82889 Revision A:2004 | DETONATING CORD ASSEMBLY (DCA) |
| MIL C 85045 : E | CABLES, FIBER OPTICS, (METRIC), GENERAL SPECIFICATION FOR |
| API 13I REDLINE : 2009 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| MIL-PRF-32306 Base Document:2008 | HOSE ASSEMBLY, PREFORMED FLEXIBLE, VIBRATION AND MOTION ISOLATION |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| I.S. EN ISO 15589-2:2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
| ASTM G 41 : 1990 : R2000 | Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment |
| MIL F 16884 : J | FUEL, NAVAL DISTILLATE |
| SAE AMS1548B | Cleaner, Turbine Engine Gas Path Solvent Emulsion Type |
| PD ISO/TS 20787:2017 | Nanotechnologies. Aquatic toxicity assessment of manufactured nanomaterials in saltwater lakes using Artemia sp. Nauplii |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| NACE SP 01 15 : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| ASTM G 208 : 2012 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM G 41 : 1990 | PRACTICE FOR DETERMINING CRACKING SUSCEPTIBILITY OF METALS EXPOSED UNDER STRESS TO A HOT SALT ENVIRONMENT |
| ASTM D 5905 : 1998 : R2008 | Standard Practice for the Preparation of Substitute Wastewater |
| ASTM D 5905 : 1998 : R2013 | Standard Practice for the Preparation of Substitute Wastewater |
| ASTM D 5108 : 1990 : R2007 | Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water (Withdrawn 2016) |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM G 208 : 2012 : R2016 | Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus |
| ASTM E 1597 : 2010 : R2019 | Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments |
| ASTM E 3078 : 2017 | Standard Practice for Conditioning of Hard Armor Test Items |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| DIN EN ISO 15181-1:2007-10 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
| ISO 15181-1:2007 | Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 1: General method for extraction of biocides |
| CSA S806: 2012 | DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
| BS EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems Offshore pipelines |
| ISO/TS 17920:2015 | Fibre ropes for offshore stationkeeping — Aramid |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| A-A-50602 Base Document:1993 | SELF-LUBRICATED BEARINGS |
| MIL PRF 16884 : K | FUEL, NAVAL DISTILLATE |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| 01/713202 DC : DRAFT SEP 2001 | ISO/DIS 15589-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| ASTM D 5905 : 1998 : R2003 | Standard Practice for the Preparation of Substitute Wastewater |
| SAE AS13441 | Test Methods for Electrical Connectors |
| MIL H 24136 : B | HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES, GENERAL SPECIFICATION FOR |
| NACE TM 01 12 : 2012 | TEST TO DETERMINE THE POTENTIAL CORROSION EFFECTS OF BALLAST WATER TREATMENT SYSTEMS ON BALLAST TANKS |
| 02/713763 DC : DRAFT DEC 2002 | ISO 15840 - SHIPS AND MARINE TECHNOLOGY - STANDARD SPECIFICATION FOR THERMOSETTING RESIN FIBREGLASS PIPE AND FITTINGS TO BE USED FOR MARINE APPLICATIONS |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| DOD P 24647 : A (2) | PAINT, ANTIFOULING, SHIP HULL (METRIC) |
| MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-24577 Revision A:2007 | DISTILLER SCALE PREVENTIVE TREATMENT FORMULATIONS |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| UNI EN ISO 10416 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
| 04/302050 DC : DRAFT JAN 2004 | ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| ASTM E 1924 : 1997 : R2012 | Standard Guide for Conducting Toxicity Tests with Bioluminescent Dinoflagellates (Withdrawn 2013) |
| SAE AS6254A | Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered) |
| API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
| API RP 13I : 2009 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
| ASTM G 205 : 2016 | Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils |
| ASTM D 3867 : 2016 | Standard Test Methods for Nitrite-Nitrate in Water |
| ASTM D 8193 : 2018 | Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy |
| ASTM D 2777 : 2013 | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 1401 : 2018 : REV B | Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids |
| I.S. EN ISO 16773-4:2017 | ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED AND UNCOATED SPECIMENS (ISO 16773-4:2017) |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| ASTM E 1681 : 2003 : R2008 : EDT 2 | Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
| ASTM D 1183 : 2003 : R2011 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM G 205 : 2016 : REDLINE | Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils |
| ASTM G 41 : 1990 : R2006 | Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment |
| ASTM D 3867 : 2016 : REDLINE | Standard Test Methods for Nitrite-Nitrate in Water |
| ASTM D 5108 : 1990 : R1996 | Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water |
| ASTM E 1681 : 2003 : R2008 : EDT 1 | Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
| ASTM E 1681: 2003 | Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
| ISO/TS 19336:2015 | Fibre ropes for offshore station keeping — Polyarylate |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| ISO 10416:2008 | Petroleum and natural gas industries — Drilling fluids — Laboratory testing |
| ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
| BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
| ISO 16773-4:2017 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 4: Examples of spectra of polymer-coated and uncoated specimens |
| BS EN ISO 15181-1:2007 | Paints and varnishes. Determination of release rate of biocides from antifouling paints General method for extraction of biocides |
| EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| EN ISO 16773-4:2017 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017) |
| EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
| EN ISO 15181-1:2007 | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides (ISO 15181-1:2007) |
| EN ISO 10416:2009 | Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008) |
| NACE TM 03 04 : 2004 | OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION |
| MIL-DTL-17901 Revision C:2005 | Bearing Components, Bonded Synthetic Rubber, Water Lubricated |
| BS EN ISO 16773-4:2017 | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens Examples of spectra of polymer-coated and uncoated specimens |
| MIL-S-28600 Revision A:1976 | SORBENTS, FLOATING (FOR OIL SPILL REMOVAL) |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| NACE TM 02 04 : 2004 | EXTERIOR PROTECTIVE COATINGS FOR SEAWATER IMMERSION SERVICE |
| NACE 1D182 : 2017 | WHEEL TEST METHOD USED FOR EVALUATION OF FILM-PERSISTENT CORROSION INHIBITORS FOR OILFIELD APPLICATIONS |
| DIN EN ISO 15589-2:2014-07 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| DIN EN ISO 16773-4:2016-02 (Draft) | ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY (EIS) ON COATED AND UNCOATED METALLIC SPECIMENS - PART 4: EXAMPLES OF SPECTRA OF POLYMER-COATED AND UNCOATED SPECIMENS (ISO 16773-4:2017) |
| PD CEN/TS 15119-2:2012 | Durability of wood and wood-based products. Determination of emissions from preservative treated wood to the environment Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water). Laboratory method |
| NF EN ISO 10416 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - LABORATORY TESTING |
| API 13I : 2009 : R2016 | RECOMMENDED PRACTICE FOR LABORATORY TESTING OF DRILLING FLUIDS |
| MIL-PRF-32007 Base Document:2003 | OILY WASTEWATER SEPARATION SYSTEM, 6.7-GALLON PER MINUTE NAVY INTEGRATED MEMBRANE SYSTEM (NIMS) |
| NACE TM 01 83 : 2006 | EVALUATION OF INTERNAL PLASTIC COATINGS FOR CORROSION CONTROL OF TUBULAR GOODS IN AN AQUEOUS FLOWING ENVIRONMENT |
| DOD-PRF-24648 Base Document:1985 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| BS ISO 15840:2004 | Ships and marine technology. Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| MIL C 83522 : D | CONNECTORS, FIBER OPTIC, SINGLE TERMINUS, GENERAL SPECIFICATION FOR |
| ASTM D 7258 : 2017 : REDLINE | Standard Specification for Polymeric Piles |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| UNI CEN/TS 15119-2 : 2012 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DETERMINATION OF EMISSIONS FROM PRESERVATIVE TREATED WOOD TO THE ENVIRONMENT - PART 2: WOODEN COMMODITIES EXPOSED IN USE CLASS 4 OR 5 (IN CONTACT WITH THE GROUND, FRESH WATER OR SEA WATER) - LABORATORY METHOD |
| ASTM G 39 : 1999 | Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens |
| ASTM G 44 : 1999 : R2013 | Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution |
| ASTM G 185 : 2006 : R2012 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| NACE TM 01 04 : 2004 | OFFSHORE PLATFORM BALLAST WATER TANK COATING SYSTEM EVALUATION |
| ASTM G 184 : 2006 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM D 1183 : 2003 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM G 184 : 2006 : R2012 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM G 41 : 1990 : R2013 | Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment |
| ASTM G 184 : 2006 : R2016 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage |
| ASTM E 1681 : 2003 : R2008 | Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials |
| ASTM G 185 :2006 | Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode |
| ASTM D 6442:2006 | Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water |
| ASTM D 5905 : 1998 : R2018 | Standard Practice for the Preparation of Substitute Wastewater |
| ASTM D 5905 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Wastewater |
| MIL-PRF-32383 Base Document:2011 | BATTERIES, RECHARGEABLE, SEALED - GENERAL SPECIFICATION FOR |
| ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
| ASTM E 200 : 2016 : REDLINE | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.