EN ISO 13628-6:2006

Current

Current The latest, up-to-date edition.

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006)

Available format(s):

Language(s):

Published date: 15-05-2006

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 System requirements
   5.1 General
   5.2 Concept development
   5.3 Production control system functionality requirement
   5.4 General requirements
   5.5 Functional requirements
   5.6 Design requirements
6 Surface equipments
   6.1 General
   6.2 General requirements
   6.3 Functional requirements
   6.4 Design requirements
7 Subsea equipment
   7.1 General
   7.2 General requirements
   7.3 Functional requirements
   7.4 Design requirements
8 Interfaces
   8.1 General
   8.2 Interface to host facility
   8.3 Interface to subsea equipment
   8.4 Interface to workover control system
   8.5 Interface to intelligent wells
9 Materials and fabrication
   9.1 General
   9.2 Materials
   9.3 Fabrication
10 Quality
11 Testing
   11.1 General
   11.2 Qualification testing
   11.3 Factory acceptance tests (FAT)
   11.4 Integrated system tests
   11.5 Documentation
12 Marking, packaging, storage and shipping
   12.1 Marking
   12.2 Packaging
   12.3 Storage and shipping
Annex A (informative) Types and selection of control system
Annex B (informative) Typical control and monitoring functions
Annex C (informative) Properties and testing of control fluids
Annex D (informative) Operational considerations with respect
                      to flowline pressure exposure
Annex E (normative) Interface to intelligent well
Annex F (informative) Definition of subsea electromagnetic
                      environment and guidance on the selection
                      of tests, limits and severity to provide
                      a presumption of compliance of subsea
                      equipment
Bibliography

Abstract - (Show below) - (Hide below)

ISO 13628-6:2006 is applicable to design, fabrication, testing, installation and operation of subsea production control systems.ISO 13628-6:2006 covers surface control system equipment, subsea-installed control system equipment and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, ISO 13628-6:2006 can be used for equipment on multiple-well applications.ISO 13628-6:2006 establishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea production equipment.ISO 13628-6:2006 contains various types of information related to subsea production control systems. They areinformative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information;basic prescriptive data that shall be adhered to by all types of control system;selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant;optional data or requirements that need be adopted only when considered necessary either by the purchaser or the vendor.In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from ISO 13628-6:2006 only the provisions needed for the application at hand. Failure to adopt a selective approach to the provisions contained herein can lead to overspecification and higher purchase costs.Rework and repair of used equipment are beyond the scope of ISO 13628-6:2006.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 12
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NS EN ISO 13628-6 : 1ED 2006	Identical
UNE-EN ISO 13628-6:2006	Identical
ISO 13628-6:2006	Identical
NBN EN ISO 13628-6 : 2006	Identical
NEN EN ISO 13628-6 : 2006	Identical
I.S. EN ISO 13628-6:2006	Identical
SN EN ISO 13628-6 : 2006	Identical
PN EN ISO 13628-6 : 2006	Identical
NF EN ISO 13628-6 : 2010	Identical
BS EN ISO 13628-6:2006	Identical
DIN EN ISO 13628-6:2008-01	Identical
UNI EN ISO 13628-6 : 2006	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 62424:2016	Representation of process control engineering. Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools
EN 62424:2016	Representation of process control engineering - Requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools

Standards Referencing This Book - (Show below) - (Hide below)

IEC 61000-4-8 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST
SAE J 517 : 2016	HYDRAULIC HOSE
IEC TS 60479-1:2005+AMD1:2016 CSV	Effects of current on human beings and livestock - Part 1: Generalaspects
ASTM D 892 : 2013-07	TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS
ISO 9606-2:2004	Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
ISO 13628-1:2005	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
ISO/TR 10949:2002	Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
ASME PV CODE 9 : 2017	BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
ASTM D 665 : 2014-11	TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER
ISO 15610:2003	Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables
ASTM D 1141 : 1998 : EDT 1	Standard Practice for the Preparation of Substitute Ocean Water
ASME PV CODE 8 DIV 1 : 2017	BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
API 6A : 2010	SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT
IEC TS 61000-1-2:2008	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
MIL STD 217 : LATEST
ASTM D 5706 : 2016 : REDLINE	Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
IEC 61000-4-8:2009	Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
ASME B31.3:2016	PROCESS PIPING
IEC 61000-4-4:2012 RLV	Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
EN 10025:1990/A1:1993	HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
ISO 9606-1:2012	Qualification testing of welders — Fusion welding — Part 1: Steels
ISO/TS 16431:2002	Hydraulic fluid power Assembled systems Verification of cleanliness
IEC 61000-4-12 : 3.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST
ISO 10418:2003	Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems
ISO 10417:2004	Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress
IEC 61000-4-6 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
ISO 15612:2004	Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure
IEC 61000-4-6:2013	Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
BS 7201-1:1989	Hydraulic fluid power. Gas loaded accumulators Specification for seamless steel accumulator bodies above 0.5 L water capacity
ISO 15614-1:2017	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 13357-2:2017	Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils
ISO 15611:2003	Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
ISO 13628-7:2005	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
MIL-STD-2000 Revision A:1991	STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
ASTM D 5707 : 2016 : REDLINE	Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
IEC 60945:2002	Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
ISO 3722:1976	Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods
IEC TS 61000-3-4:1998	Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A
IEC 60870-5-2:1992	Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures
IEC 60533:2015	Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
ISO 13628-4:2010	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
BS 7201-2:1995	Hydraulic fluid power. Gas loaded accumulators Dimensions of gas ports
ISO 10423:2009	Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment
API SPEC 17E : 2017	SPECIFICATION FOR SUBSEA UMBILICALS
SAE AS 4059F : 2013	AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS
ISO 15609-2:2001	Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding
IEC 60870-5-1:1990	Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats
DIN 41612-2:1987-10	TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D
ISO 15613:2004	Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test
IEC 60870-5-3:1992	Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structure of application data
AWS D1.1 : 2000	STRUCTURAL WELDING CODE - STEEL
ISO 15607:2003	Specification and qualification of welding procedures for metallic materials General rules
ISO 13628-5:2009	Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
ISO 10945:1994	Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports
ASTM D 471 : 2016-02	TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
IP 135 : 2015	DETERMINATION OF RUST-PREVENTING CHARACTERISTICS OF STEAM-TURBINE OIL IN THE PRESENCE OF WATER
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV	Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
API 17D : 2011	DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
IEC 61000-3-2 : 4.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
IEC 61000-4-16 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
EN 287-1:2011	Qualification test of welders - Fusion welding - Part 1: Steels

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart