ASTM D 116 : 1986 : R2020
Current
The latest, up-to-date edition.
Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
Hardcopy , PDF
English
15-12-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 21
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods outline procedures for testing samples of vitrified ceramic materials that are to be used as electrical insulation. Where specified limits are mentioned herein, they shall not be interpreted as specification limits for completed insulators.
1.2These test methods are intended to apply to unglazed specimens, but they may be equally suited for testing glazed specimens. The report section shall indicate whether glazed or unglazed specimens were tested.
1.3The test methods appear as follows:
| Section | Test Method | Related |
| 6 | Compressive Strength | C773 |
| 13 | Dielectric Strength | D618, D149 |
| 8 | Elastic Properties | C623 |
| 15 | Electrical Resistivity | D618, D257, D1829 |
| 7 | Flexural Strength | C674, F417 |
| 9 | Hardness | C730, E18 |
| 5 | Porosity | C373 |
| 14 | Relative Permittivity and Dissipation | D150, D2149, D2520 |
| 4 | Specific Gravity | C20, C329, F77 |
| 10 | Thermal Conductivity | C177, C408 |
| 12 | Thermal Expansion | C539, E288 |
| 11 | Thermal Shock Resistance |
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in 11.3, 13.5, and 15.3.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM C 177 : 2019 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM C 539 : 1984 : R2016 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method |
| ASTM C 674 : 2013 : R2018 | Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials |
| ASTM D 150 : 2022 | Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
| ASTM D 2149 : 2013 | Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C |
| ASTM C 730 : 1998 : R2021 | Standard Test Method for Knoop Indentation Hardness of Glass |
| ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM D 257 : 2014 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM D 2520 : 2021 | Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 °C |
| ASTM C 20 : 2000 : R2015 | Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water |
| ASTM C 730 : 1998 : R2013 | Standard Test Method for<brk type="line"/> Knoop Indentation Hardness of Glass |
| ASTM E 288 : 1994 : R1998 | Standard Specification for Laboratory Glass Volumetric Flasks |
| ASTM C 20 : 2000 : R2022 | Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water |
| ASTM C 373 : 2018 | Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products |
| ASTM D 2149 : 2013 : R2021 | Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 °C |
| ASTM D 638 : 2014 | Standard Test Method for Tensile Properties of Plastics |
| ASTM C 373 : 2018 : R2023 | Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products |
| ASTM C 623 : 2021 | Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance |
| ASTM D 618 : 2013 | Standard Practice for Conditioning Plastics for Testing |
| ASTM C 329 : 1988 : R2020 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
| ASTM E 18 : 2019 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM C 177 : 2019 : EDT 1 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
| ASTM D 2520 : 2013 | Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650<sup>o</sup>C |
| ASTM D 150 : 2018 | Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
| ASTM C 539 : 1984 : R2021 | Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method |
| ASTM C 674 : 2013 : R2023 | Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials |
| ASTM C 20 : 2000 : R2022 | Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water |
| ASTM D 257 : 2014 : R2021 : EDT 1 | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 618 : 2021 | Standard Practice for Conditioning Plastics for Testing |
| ASTM C 623 : 1992 : R2015 | Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance |
| ASTM D 638 : 2022 | Standard Test Method for Tensile Properties of Plastics |
| ASTM C 329 : 1988 : R2024 | Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.