ASTM D 5575 : 2018
|
Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
ASTM D 1822 : 2013
|
Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
ASTM D 7471 : 2019
|
Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials |
ASTM D 2291/D2291M : 2016
|
Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
ASTM D 2143 : 2021
|
Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe |
ASTM D 3294 : 2015
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
ASTM D 6691 : 2017
|
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum |
ASTM D 7193 : 2017
|
Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM F 894 : 2019
|
Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe |
ASTM F 1533 : 2020
|
Standard Specification for Deformed Polyethylene (PE) Liner |
ASTM D 1238 : 2020
|
Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
ASTM D 2911/D2911M : 2016
|
Standard Specification for Dimensions and Tolerances for Plastic Bottles |
ASTM F 2986 : 2012 : R2017
|
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications |
ASTM D 1201 : 2013
|
Standard Specification for Thermosetting Polyester Molding Compounds |
ASTM G 125 : 2000 : R2015
|
Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants |
ASTM D 1790 : 2021
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM D 5117 : 2017
|
Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
ASTM D 4068 : 2017
|
Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane |
ASTM D 5628 : 2018
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
ASTM D 2949 : 2018
|
Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
ASTM D 3763 : 2018
|
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
ASTM D 4703 : 2016
|
Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets |
ASTM D 7194 : 2019
|
Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) |
ASTM F 2806 : 2020
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
ASTM D 696 : 2016
|
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
ASTM D 5485 : 2021
|
Standard Test Method for Determining Corrosive Effect of Combustion Products Using the Cone Corrosimeter |
ASTM D 4894 : 2019
|
Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials |
ASTM D 5229/D5229M : 2020
|
Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials |
ASTM D 7445 : 2018
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding) |
ASTM D 2647 : 2018
|
Standard Specification for Crosslinkable Ethylene Plastics |
ASTM F 2817 : 2013 : R2019
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair |
ASTM D 2680 : 2020
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
ASTM F 2658 : 2007 : R2019
|
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
ASTM F 2969 : 2012 : R2020
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe |
ASTM F 512 : 2019
|
Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation |
ASTM F 734 : 2017
|
Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material |
ASTM D 6289 : 2013 : R2019
|
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
ASTM D 5721 : 2008 : R2018
|
Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
ASTM D 1779 : 1998 : R2017
|
Standard Specification for Adhesive for Acoustical Materials |
ASTM D 1776/D1776M : 2020
|
Standard Practice for Conditioning and Testing Textiles |
ASTM D 4396 : 2015
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
ASTM D 1204 : 2014 : R2020
|
Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
ASTM F 2945 : 2018
|
Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings |
ASTM F 2854 : 2021
|
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing |
ASTM D 4673 : 2016
|
Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
ASTM D 3275 : 2018
|
Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials |
ASTM D 7106/D7106M : 2005 : R2015 : EDT 1
|
Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes |
ASTM D 2729 : 2017
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
ASTM D 5023 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) |
ASTM D 1922 : 2015 : R2020
|
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method |
ASTM F 3253 : 2019
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems |
ASTM D 3748 : 2014 : R2019
|
Standard Practice for Evaluating High-Density Rigid Cellular Plastics |
ASTM D 6272 : 2017 : EDT 1
|
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
ASTM D 2992 : 2018
|
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
ASTM F 964 : 2013 : R2019
|
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing |
ASTM D 5319 : 2017
|
Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
ASTM E 2769 : 2018
|
Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading |
ASTM D 2235 : 2004 : R2016
|
Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
ASTM F 2433 : 2005 : R2018
|
Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness |
ASTM D 5748 : 1995 : R2019
|
Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
ASTM F 736 : 2017
|
Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight |
ASTM F 3034 : 2015 : R2020
|
Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE) |
ASTM D 2671 : 2021
|
Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
ASTM D 4883 : 2018
|
Standard Test Method for Density of Polyethylene by the Ultrasound Technique |
ASTM D 6867 : 2019
|
Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
ASTM D 1043 : 2016
|
Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test |
ASTM F 2686 : 2014
|
Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe (Withdrawn 2023) |
ASTM D 3034 : 2016
|
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
ASTM D 2240 : 2015 : EDT 1
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 6434 : 2012 : R2018
|
Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes |
ASTM D 1622 : 2020
|
Standard Test Method for Apparent Density of Rigid Cellular Plastics |
ASTM D 4762 : 2018
|
Standard Guide for Testing Polymer Matrix Composite Materials |
ASTM F 891 : 2016
|
Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
ASTM D 8136 : 2017
|
Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge |
ASTM F 2160 : 2016
|
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD) |
ASTM E 906/E906M : 2017
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method |
ASTM D 2444 : 2021
|
Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
ASTM F 2600 : 2009 : R2018
|
Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing |
ASTM D 149 : 2020
|
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies |
ASTM D 5329 : 2020
|
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements |
ASTM D 1868 : 2020
|
Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
ASTM D 150 : 2018
|
Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation |
ASTM D 3678 : 2019
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
ASTM F 2618 : 2021
|
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems |
ASTM D 6358 : 2019 : EDT 1
|
Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods |
ASTM D 2343 : 2017
|
Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics |
ASTM D 4272/D4272M : 2015
|
Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop |
ASTM F 2306/F2306M : 2020
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications |
ASTM D 2843 : 2019
|
Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
ASTM D 6712 : 2017
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes |
ASTM D 1430 : 2017
|
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
ASTM D 3916 : 2008 : R2016
|
Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod |
ASTM D 5930 : 2017
|
Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
ASTM D 5685 : 2019
|
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
ASTM D 7475 : 2020
|
Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions |
ASTM F 2928 : 2018
|
Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods |
ASTM D 6338 : 2017
|
Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods |
ASTM F 2763/F2763M : 2016 : R2021 : EDT 1
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
ASTM D 2683 : 2020
|
Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
ASTM D 746 : 2020
|
Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
ASTM D 6394 : 2021 : REV A
|
Standard Classification System for and Basis for Specification for Sulfone Plastics (SP) |
ASTM D 705 : 1999 : R2020
|
Standard Specification for Urea-Formaldehyde Molding Compounds |
ASTM F 438 : 2017
|
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
ASTM D 1879 : 2006 : R2014
|
Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation |
ASTM F 2968/F2968M : 2021
|
Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications |
ASTM D 3030 : 2017
|
Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins |
ASTM F 1483 : 2017
|
Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
ASTM D 4802 : 2016
|
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
ASTM D 4895 : 2018
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
ASTM F 3219 : 2019
|
Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings |
ASTM D 6778 : 2020
|
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
ASTM F 2418 : 2019
|
Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers |
ASTM D 706 : 2020
|
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
ASTM D 4335 : 2018
|
Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser |
ASTM D 5138 : 2016
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
ASTM D 882 : 2018
|
Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
ASTM D 4801 : 2008 : R2016
|
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater |
ASTM D 785 : 2008 : R2015
|
Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials |
ASTM F 2922 : 2013 : R2018
|
Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers |
ASTM D 6108 : 2019
|
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes |
ASTM D 3159 : 2020
|
Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials |
ASTM D 7791 : 2017
|
Standard Test Method for Uniaxial Fatigue Properties of Plastics |
ASTM D 732 : 2017
|
Standard Test Method for Shear Strength of Plastics by Punch Tool |
ASTM F 1974 : 2009 : R2020
|
Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
ASTM F 2720/F2720M : 2020
|
Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe |
ASTM F 1866 : 2018
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings |
ASTM D 1248 : 2016
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 1593 : 2019
|
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting |
ASTM D 4611 : 2016
|
Standard Test Method for Specific Heat of Rock and Soil |
ASTM D 2665 : 2020
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
ASTM F 2788/F2788M : 2021
|
Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe |
ASTM D 6713 : 2019
|
Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
ASTM D 3122 : 2015
|
Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings |
ASTM D 6068 : 2010 : R2018
|
Standard Test Method for Determining J-R Curves of Plastic Materials |
ASTM D 4349 : 2016
|
Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
ASTM D 4216 : 2017
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds |
ASTM D 707 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
ASTM F 1488 : 2014 : R2019
|
Standard Specification for Coextruded Composite Pipe |
ASTM D 2583 : 2013 : REV A
|
Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022) |
ASTM D 1693 : 2015 : EDT 1
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ASTM D 4812 : 2019
|
Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
ASTM F 1871 : 2020
|
Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation |
ASTM F 439 : 2019
|
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
ASTM D 4397 : 2016
|
Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications |
ASTM F 441/F441M : 2020
|
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
ASTM F 1282 : 2017
|
Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
ASTM D 953 : 2019
|
Standard Test Method for Pin-Bearing Strength of Plastics |
ASTM D 3841 : 2021
|
Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
ASTM D 3222 : 2020
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
ASTM F 2863 : 2011 : R2016
|
Standard Specification for Central Vacuum Hose Inlet Valve Socket Dimensions |
ASTM D 5436 : 2015 : R2020
|
Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
ASTM D 4476/D4476M : 2014
|
Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods (Withdrawn 2022) |
ASTM D 5946 : 2017
|
Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements |
ASTM D 5024 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression |
ASTM D 2105 : 2001 : R2019
|
Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
ASTM D 1494 : 2017
|
Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels |
ASTM D 2287 : 2019
|
Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds |
ASTM D 952 : 2015
|
Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials |
ASTM F 2829/F2829M : 2021
|
Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe |
ASTM F 2435 : 2015
|
Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe |
ASTM D 3296 : 2014 : REV A : R2019
|
Standard Specification for FEP-Fluorocarbon Tube |
ASTM F 2764/F2764M : 2019
|
Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications |
ASTM D 1003 : 2021
|
Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
ASTM G 74 : 2013
|
Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
ASTM D 6585 : 2017
|
Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
ASTM D 1894 : 2014
|
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023) |
ASTM D 8033 : 2016
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
ASTM D 2103 : 2015
|
Standard Specification for Polyethylene Film and Sheeting |
ASTM D 1998 : 2015
|
Standard Specification for Polyethylene Upright Storage Tanks |
ASTM F 1504 : 2014 : R2021 : EDT 1
|
Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
ASTM F 1901 : 2016
|
Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
ASTM D 2275 : 2014
|
Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface |
ASTM D 6109 : 2019
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
ASTM D 788 : 2016
|
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
ASTM D 1004 : 2021
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM D 7472 : 2019
|
Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials |
ASTM D 7792/D7792M : 2015
|
Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs |
ASTM D 7027 : 2020
|
Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine |
ASTM F 1735 : 2021
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
ASTM F 437 : 2021
|
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
ASTM D 3012 : 2019
|
Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven |
ASTM D 7992/D7992M : 2015
|
Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs |
ASTM F 2623 : 2019
|
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications |
ASTM D 543 : 2020
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
ASTM D 5948 : 2005 : R2020
|
Standard Specification for Molding Compounds, Thermosetting |
ASTM D 5526 : 2018
|
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions |
ASTM F 1306 : 2021
|
Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates |
ASTM F 1336 : 2020
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
ASTM D 1203 : 2021
|
Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods |
ASTM D 1932 : 2019
|
Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes |
ASTM D 4969 : 2017
|
Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
ASTM D 6835 : 2017
|
Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE) |
ASTM D 2582 : 2021
|
Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
ASTM F 3506 : 2021 : EDT 1
|
Standard Specification for Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration Line Set Systems |
ASTM D 2228 : 2004 : R2019
|
Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method |
ASTM F 679 : 2016
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
ASTM F 1803 : 2015 : R2019
|
Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter |
ASTM F 3131 : 2014
|
Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages |
ASTM D 4551 : 2017
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane |
ASTM F 2769 : 2018
|
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems |
ASTM D 4635 : 2016
|
Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications |
ASTM F 1362 : 2018
|
Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials |
ASTM D 1712 : 2009 : R2020
|
Standard Practice for Resistance of Plastics to Sulfide Staining |
ASTM D 2672 : 2020 : EDT 1
|
Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement |
ASTM D 2148 : 2019 : EDT 1
|
Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation |
ASTM F 2929 : 2017
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
ASTM D 6113 : 2021
|
Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
ASTM F 3346 : 2019
|
Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PERT/AL/PE-RT) Composite Pressure Pipe |
ASTM D 1636 : 2013
|
Standard Specification for Allyl Molding Compounds |
ASTM F 949 : 2020
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
ASTM D 3965 : 2016
|
Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
ASTM D 2852 : 2016
|
Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings (Withdrawn 2022) |
ASTM F 2984 : 2013 : R2019
|
Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits |
ASTM D 5418 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) |
ASTM F 2807 : 2013 : R2018
|
Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications |
ASTM D 695 : 2015
|
Standard Test Method for Compressive Properties of Rigid Plastics |
ASTM D 4477 : 2016
|
Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
ASTM D 2659 : 2016
|
Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers |
ASTM D 5288 : 2014
|
Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum) |
ASTM D 3308 : 2012 : R2017
|
Standard Specification for PTFE Resin Skived Tape |
ASTM F 3128 : 2019
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core |
ASTM G 151 : 2019
|
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
ASTM D 5947 : 2018
|
Standard Test Methods for Physical Dimensions of Solid Plastics Specimens |
ASTM G 176 : 2003 : R2017
|
Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method |
ASTM D 6098 : 2016
|
Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
ASTM D 6325 : 1998 : R2019
|
Standard Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives |
ASTM D 2513 : 2020
|
Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings |
ASTM D 2609 : 2021
|
Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe |
ASTM F 119 : 1982 : R2015
|
Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method) |
ASTM F 1412 : 2016
|
Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
ASTM F 480 : 2014
|
Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
ASTM F 2881/F2881M : 2021
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
ASTM D 6150 : 2016
|
Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
ASTM D 2737 : 2012 : REV A : R2020
|
Standard Specification for Polyethylene (PE) Plastic Tubing |
ASTM D 1039 : 2016
|
Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation |
ASTM D 2152 : 2017
|
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion |
ASTM D 3295 : 2020
|
Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
ASTM F 1673 : 2010 : R2016
|
Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
ASTM G 137 : 1997 : R2017
|
Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration |
ASTM D 3420 : 2021
|
Standard Test Method for Pendulum Impact Resistance of Plastic Film |
ASTM D 4093 : 1995 : R2014
|
Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials |
ASTM D 3485 : 2015
|
Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC) |
ASTM D 1938 : 2019
|
Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method |
ASTM D 4226 : 2019 : EDT 1
|
Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products |
ASTM D 4496 : 2021
|
Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials |
ASTM D 4101 : 2017 : EDT 1
|
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials |
ASTM D 7211 : 2013 : R2018
|
Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use |
ASTM F 2158 : 2008 : R2016
|
Standard Specification for Residential Central-Vacuum Tube and Fittings |
ASTM D 4097 : 2019
|
Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
ASTM D 787 : 2018
|
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds |
ASTM D 2632 : 2015 : R2019
|
Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
ASTM F 758 : 2014 : R2019
|
Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
ASTM D 6110 : 2018
|
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics |
ASTM D 4000 : 2020
|
Standard Classification System for Specifying Plastic Materials |
ASTM D 907 : 2015
|
Standard Terminology of Adhesives |
ASTM D 1562 : 2015
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
ASTM D 2838 : 2018
|
Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting |
ASTM D 2734 : 2016
|
Standard Test Methods for Void Content of Reinforced Plastics |
ASTM F 1957 : 1999 : R2017
|
Standard Test Method for Composite Foam Hardness-Durometer Hardness |
ASTM D 5419 : 2014 : REV A
|
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
ASTM D 7705/D7705M : 2012 : R2019
|
Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction |
ASTM D 2467 : 2020
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
ASTM D 4976 : 2012 : REV A : R2020
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials |
ASTM D 2863 : 2019
|
Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
ASTM F 2390 : 2012 : R2017
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content |
ASTM D 3914 : 2002 : R2016
|
Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
ASTM F 1365 : 1991 : R2018
|
Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals |
ASTM D 1785 : 2021
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
ASTM D 5422 : 2017
|
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer |
ASTM D 6100 : 2017
|
Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
ASTM D 3826 : 2018
|
Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
ASTM D 5740 : 2018
|
Standard Guide for Writing Material Standards in the Classification D4000 Format |
ASTM G 21 : 2015 : R2021 : EDT 1
|
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
ASTM F 442/F442M : 2020
|
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR) |
ASTM D 1709 : 2016 : REV A : EDT 1
|
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
ASTM F 1864 : 2021
|
Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings |
ASTM D 5026 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension |
ASTM D 8366 : 2021
|
Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF |
ASTM D 2241 : 2020
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) |
ASTM F 810 : 2012 : R2018
|
Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
ASTM D 638 : 2014
|
Standard Test Method for Tensile Properties of Plastics |
ASTM D 4634 : 2016
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
ASTM F 2561 : 2020
|
Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner |
ASTM F 2905/F2905M : 2021
|
Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications |
ASTM F 794 : 2021
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
ASTM F 735 : 2017
|
Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method |
ASTM D 817 : 2012 : R2019
|
Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate |
ASTM D 2578 : 2017
|
Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films |
ASTM D 955 : 2021
|
Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics |
ASTM D 4470 : 2018
|
Standard Test Method for Static Electrification |
ASTM F 3123 : 2018 : REV A
|
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN) |
ASTM D 2673 : 2014
|
Standard Specification for Oriented Polypropylene Film |
ASTM F 793/F793M : 2020
|
Standard Classification of Wall Coverings by Use Characteristics |
ASTM E 2945 : 2014 : R2021
|
Standard Test Method for Film Permeability Determination Using Static Permeability Cells |
ASTM D 2466 : 2021
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 |
ASTM F 2818 : 2010 : R2019
|
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing |
ASTM D 116 : 1986 : R2020
|
Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications |
ASTM D 3307 : 2016
|
Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials |
ASTM F 877 : 2020
|
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems |
ASTM D 4495 : 2016
|
Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight |
ASTM D 704 : 1999 : R2020
|
Standard Specification for Melamine-Formaldehyde Molding Compounds |
ASTM F 1505 : 2016
|
Standard Specification for Insulated and Insulating Hand Tools |
ASTM F 2648/F2648M : 2020
|
Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications |
ASTM D 6261 : 2014
|
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
ASTM D 5926 : 2015 : R2020
|
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
ASTM D 3835 : 2016
|
Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
ASTM D 5988 : 2018
|
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil |
ASTM D 7774 : 2017
|
Standard Test Method for Flexural Fatigue Properties of Plastics |
ASTM D 1621 : 2016
|
Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
ASTM D 635 : 2018
|
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
ASTM F 667/F667M : 2016 : R2021
|
Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings |
ASTM D 6262 : 2017
|
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
ASTM F 409 : 2017
|
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
ASTM F 2562/F2562M : 2015 : R2019
|
Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
ASTM D 2517 : 2018
|
Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings |
ASTM D 6324 : 2011 : R2017
|
Standard Specification for Male Condoms Made from Polyurethane |
ASTM D 5279 : 2013
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion |
ASTM D 494 : 2011(R2019)
|
Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products |
ASTM D 5205 : 2016
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
ASTM D 7474 : 2017
|
Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents |
ASTM F 2987 : 2012 : R2018
|
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications (Withdrawn 2024) |
ASTM D 1525 : 2017 : EDT 1
|
Standard Test Method for Vicat Softening Temperature of Plastics |
ASTM F 3371 : 2019
|
Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications |
ASTM D 2290 : 2019 : REV A
|
Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe |
ASTM D 2122 : 2016
|
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
ASTM D 4024 : 2015
|
Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
ASTM D 5041 : 1998 : R2019
|
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints |
ASTM D 790 : 2017
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
ASTM D 1337 : 2010 : R2021
|
Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength |
ASTM D 5338 : 2015 : R2021
|
Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures |
ASTM D 2990 : 2017
|
Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
ASTM D 2442 : 1975 : R2020
|
Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
ASTM F 1281 : 2017
|
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
ASTM D 4020 : 2018
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials |
ASTM F 2947/F2947M : 2021
|
Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
ASTM D 7292 : 2018
|
Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) |
ASTM F 2159 : 2021
|
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing |
ASTM D 2661 : 2014 : EDT 1
|
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
ASTM D 3846 : 2008 : R2015
|
Standard Test Method for In-Plane Shear Strength of Reinforced Plastics (Withdrawn 2024) |
ASTM D 792 : 2020
|
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
ASTM D 3595 : 2014 : R2019 : EDT 1
|
Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film |
ASTM D 2996 : 2017
|
Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM D 3139 : 2019
|
Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals |
ASTM D 256 : 2010 : R2018
|
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM D 2561 : 2017
|
Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers |
ASTM D 3679 : 2017
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
ASTM D 2239 : 2012 : REV A : R2020
|
Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter |
ASTM D 1708 : 2018
|
Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
ASTM D 5990 : 2020 : REV A
|
Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK) |
ASTM F 3036 : 2013
|
Standard Guide for Testing Absorbable Stents |
ASTM D 1434 : 1982 : R2015 : EDT 1
|
Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
ASTM D 5204 : 2019
|
Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials |
ASTM D 2732 : 2014 : R2020
|
Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting |
ASTM D 4203 : 2017
|
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
ASTM D 7293 : 2019
|
Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
ASTM D 4067 : 2016
|
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
ASTM D 1784 : 2020
|
Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
ASTM D 6988 : 2013
|
Standard Guide for Determination of Thickness of Plastic Film Test Specimens |
ASTM D 3354 : 2015
|
Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
ASTM F 791 : 2018
|
Standard Test Method for Stress Crazing of Transparent Plastics |
ASTM D 4065 : 2020
|
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
ASTM D 5336 : 2015 : REV A
|
Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material |
ASTM D 3299 : 2018
|
Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
ASTM F 2468 : 2005 : R2019
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM D 3368 : 2017
|
Standard Specification for FEP Sheet and Film |
ASTM D 2739 : 1997 : R2017
|
Standard Test Method for Volume Resistivity of Conductive Adhesives |
ASTM D 2765 : 2016
|
Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
ASTM F 1732 : 2012 : R2018
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material |
ASTM D 542 : 2014
|
Standard Test Method for Index of Refraction of Transparent Organic Plastics |
ASTM D 6339 : 2011 : R2019
|
Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
ASTM F 1697 : 2018
|
Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit |
ASTM D 4726 : 2018
|
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors |
ASTM D 7793 : 2020
|
Standard Specification for Insulated Vinyl Siding |
ASTM D 1710 : 2015
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
ASTM G 175 : 2013
|
Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
ASTM F 2785 : 2020 : EDT 1
|
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings |
ASTM F 1499 : 2017
|
Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
ASTM D 2584 : 2018
|
Standard Test Method for Ignition Loss of Cured Reinforced Resins |
ASTM D7444 : 2018 : REV A
|
Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
|
ASTM D 5420 : 2021
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
ASTM D 5870 : 2016
|
Standard Practice for Calculating Property Retention Index of Plastics |
ASTM D 4066 : 2013 : R2019
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
ASTM D 7853 : 2013 : R2020
|
Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete |
ASTM D 5511 : 2018
|
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
ASTM D 5857 : 2017
|
Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
ASTM D 2684/D2684M : 2015
|
Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products (Withdrawn 2024) |
ASTM D 5083 : 2017
|
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
ASTM D 2464 : 2015
|
Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
ASTM D 3035 : 2015
|
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
ASTM D 4350 : 2016
|
Standard Test Method for Corrosivity Index of Plastics and Fillers |
ASTM D 1746 : 2015
|
Standard Test Method for Transparency of Plastic Sheeting |
ASTM D 5893/D5893M : 2016 : R2021
|
Standard Specification for Cold-Applied, Single-Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements |
ASTM F 876 : 2020 : REV B
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing |
ASTM F 2953 : 2012 : R2021
|
Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages |
ASTM D 6263 : 2015
|
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
ASTM D 3528 : 1996 : R2016
|
Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading |
ASTM D 2924 : 2012 : R2017
|
Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM D 6041 : 2018
|
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
ASTM D 2997 : 2021
|
Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
ASTM G 147 : 2017
|
Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
ASTM D 5171 : 2015 : R2020
|
Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons |
ASTM D 1929 : 2020
|
Standard Test Method for Determining Ignition Temperature of Plastics |
ASTM D 5170 : 1998 : R2021
|
Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners |
ASTM D 2240 : 2015 : R2021
|
Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 3013 : 2013 : R2021
|
Standard Specification for Epoxy Molding Compounds |
ASTM D 3350 : 2021
|
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials |
ASTM D 4475 : 2021
|
Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method |
ASTM F 2929 : 2017 : R2021
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
ASTM D 2116 : 2016 : R2021
|
Standard Specification for FEP Resin Molding and Extrusion Materials |
ASTM D 5279 : 2021
|
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion |
ASTM D 5169 : 1998 : R2021
|
Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
ASTM F 2785 : 2021
|
Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings |
ASTM F 2905/F2905M : 2021 : REV A
|
Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications |