ASTM D 1176 : 2014 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
Available format(s)
PDF
Language(s)
English
Published date
01-04-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.05, 2015 Specifies information on sampling and preparing solutions of engine coolants and antirusts.
| Committee |
D 15
|
| DocumentType |
Redline
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This practice covers information on sampling and preparing solutions of engine coolants and antirusts (Notes 1 and 2).
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are approximate equivalents given for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Note 1—Antirust as referred to in this practice covers products intended for use in automotive/light-duty and heavy-duty applications in which water is used as the cooling medium.
Note 2—Antirust products are available in liquid and solid form. Solids should be handled as outlined in Annex A1.
| ASTM D 7437 : 2008 : R2013 | Standard Test Method for Temperature and Hard Water Stability of Engine Coolants |
| O-A-548 Revision D:1974 | ANTIFREEZE COOLANT, ENGINE, ETHYLENE GLYCOL, INHIBITED, CONCENTRATED |
| MIL-A-8243 Revision D:1985 | ANTI-ICING AND DEICING-DEFROSTING FLUIDS |
| ASTM D 6130 : 2011 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 6660 : 2001 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 7437:2008 | Standard Test Method for Temperature and Hard Water Stability of Engine Coolants |
| ASTM D 7896 : 2014 | Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method |
| ASTM D 7820 : 2012 | Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel |
| ASTM D 5827 : 2009 : EDT 1 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 6129 : 1997 | Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ASTM D 2809 : 2009 : R2017 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 6107 : 1997 : R2012 | Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ASTM D 2809 : 2009 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 1123 : 1999 : R2003 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1119 : 2005 : R2009 | Standard Test Method for Percent Ash Content of Engine Coolants |
| ASTM D 6130 : 2011 : R2018 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 1120 : 2017 : REDLINE | Standard Test Method for Boiling Point of Engine Coolants |
| ASTM D 1123 : 1999 : R2003 : EDT 1 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 1123 : 1999 : R2003e1 | TEST METHODS FOR WATER IN ENGINE COOLANT CONCENTRATE BY THE KARL FISCHER REAGENT METHOD |
| ASTM D 1122 : 2016 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 6107 : 1997 : R2017 | Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ASTM D 3147 : 2006 : R2013 | Standard Test Method for Testing Stop-Leak Additives for Engine Coolants |
| ASTM D 6660 : 2001 : R2007 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 4340 : 2019 : REDLINE | Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions |
| ASTM D 1119 : 2005 : R2015 | Standard Test Method for Percent Ash Content of Engine Coolants |
| ASTM D 7304 : 2016 : REDLINE | Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC |
| ASTM D 3585 : 2008 | Standard Specification for ASTM Reference Fluid for Coolant Tests |
| ASTM D 3634 : 1999 : EDT 1 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 7736 : 2012 : R2018 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM D 3634 : 1999 : R2005 : EDT 1 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 3585 : 2008 : R2013 | Standard Specification for ASTM Reference Fluid for Coolant Tests |
| ASTM D 2570 : 2016 : REDLINE | Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants |
| ASTM D 3634 : 1999 : R2005 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 6660 : 2001 : R2019 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 1881 : 2017 : REDLINE | Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
| ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
| MIL-T-37402 Base Document:1977 | TESTER, ANTIFREEZE, SOLUTIONS |
| ASTM D 1384 : 2005 : EDT 1 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM D 1119 : 2005 | Standard Test Method for Percent Ash Content of Engine Coolants |
| ASTM D 1384 : 2005 : R2012 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM D 3634 : 1999 : R2009 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 6129 : 1997 : R2002 | Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ASTM D 6660 : 2001 : R2014 : EDT 1 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 6107 : 1997 : R2002 | Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ASTM D 1177 : 2017 : REDLINE | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
| ASTM D 1882 : 2017 : REDLINE | Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles |
| ASTM D 1384 : 2005 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM D 5827 : 2009 : R2015 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 3634 : 1999 : R2015 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 6129 : 1997 : R2007 | Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ASTM D 7934/D7934M : 2014 | Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions (Withdrawn 2023) |
| ASTM D 6107 : 1997 : R2007 | Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ASTM D 7736 : 2012 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM D 7935/D7935M : 2014 | Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware |
| ASTM D 6107 : 1997 | Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ASTM D 3147 : 2006 | Standard Test Method for Testing Stop-Leak Additives for Engine Coolants |
| ASTM D 1123 : 1999 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 5827 : 2009 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 6660 : 2001 : EDT 1 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 4921 : 1995 : R2006 | Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature |
| ASTM D 1287 : 2011 : REDLINE | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 1123 : 1999 : R2009 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| MIL-A-46153 Revision C:1991 | ANTIFREEZE, ETHYLENE GLYCOL, INHIBITED, HEAVY DUTY, SINGLE PACKAGE |
| ASTM D 7933 : 2015 | Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers |
| CGSB 3.532 : M85 | ANTIFREEZE, WINDSHIELD WASHER, METHANOL BASE |
| ASTM D 1121 : 2011 : REDLINE | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D 1122 : 2016 : R2017 : EDT 1 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 4921 : 1995 : R2000 | Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature |
| ASTM D 4921 : 1995 : R2012 | Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature |
| ASTM D 1123 : 1999 : R2015 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 6129 : 1997 : R2015 | Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ASTM D 7935 : 2020 : REDLINE | Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.