ASTM D 1071 : 2017
|
Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
ASTM A 569/A569M : 1998
|
Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial (Withdrawn 2000) |
AATCCTM107:2013e2:2019
|
COLORFASTNESS TO WATER |
ASTM D 6695 : 2016 : REDLINE
|
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
ASTM D 297 : 2015 : REDLINE
|
Standard Test Methods for Rubber Products—Chemical Analysis |
GPA 2166 : 2005(R2017)
|
OBTAINING NATURAL GAS SAMPLES FOR ANALYSIS BY GAS CHROMATOGRAPHY |
ASTM D 2652 : 2011 : REDLINE
|
Standard Terminology Relating to Activated Carbon |
ASTM E 122 : 2017 : REDLINE
|
Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
ISO 8130-13:2001
|
Coating powders Part 13: Particle size analysis by laser diffraction |
ASTM D 3515 : 2001
|
Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009) |
AATCC TM23:2015e
|
COLORFASTNESS TO BURNT GAS FUMES |
ASTM D 870 : 2015
|
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
ASTM D 3900 : 2017 : REDLINE
|
Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry |
TAPPI T 236 : 2013
|
KAPPA NUMBER OF PULP |
ASTM E 1 : 2014 : REDLINE
|
Standard Specification for ASTM Liquid-in-Glass Thermometers |
ASTM D 1129 : 2013 : REDLINE
|
Standard Terminology Relating to Water |
ASTM D 98 : 2015 : REDLINE
|
Standard Specification for Calcium Chloride |
ASTM D 618 : 2013 : REDLINE
|
Standard Practice for Conditioning Plastics for Testing |
MIL-P-15931 Revision F:1991
|
PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
ASTM E 177 : 2014 : REDLINE
|
Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 2258 : 1999
|
Standard Practice for Sampling Yarn for Testing |
ASTM D 2777 : 2013 : REDLINE
|
Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
ASTM D 1729 : 2016 : REDLINE
|
Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
ASTM D 143 : 2014 : REDLINE
|
Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 4728 : 2017 : REDLINE
|
Standard Test Method for Random Vibration Testing of Shipping Containers |
ASTM D 1176 : 2014 : REDLINE
|
Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes |
ASTM D 1177 : 2017 : REDLINE
|
Standard Test Method for Freezing Point of Aqueous Engine Coolants |
ASTM D 2132 : 2012-02
|
TEST METHOD FOR DUST-AND-FOG TRACKING AND EROSION RESISTANCE OF ELECTRICAL INSULATING MATERIALS |
ISO 8130-10:1998
|
Coating powders Part 10: Determination of deposition efficiency |
TAPPI T 411 : 2010
|
THICKNESS (CALIPER) OF PAPER, PAPERBOARD, AND COMBINED BOARD |
ASTM D 3198 : 1997
|
Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures |
ASTM B 265 : 2015 : REDLINE
|
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate |
ASTM E 181 : 2017 : REDLINE
|
Standard Test Methods for Detector Calibration and Analysis of Radionuclides |
ASTM E 302 : 1995
|
Test Methods for Monobasic Organic Acids (Withdrawn 2001) |
ISO 8130-5:1992
|
Coating powders Part 5: Determination of flow properties of a powder/air mixture |
ASTM D 1248 : 2016 : REDLINE
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 1613 : 2017 : REDLINE
|
Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
ASTM D 3613 : 1998
|
Standard Practice for Sampling Insulating Liquids for Gas Analysis and Determination of Water Content (Withdrawn 2007) |
ISO 8130-11:1997
|
Coating powders Part 11: Inclined-plane flow test |
ASTM G 153 : 2013 : REDLINE
|
Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM D 3424 : 2011 : REDLINE
|
Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
MIL-STD-810 Revision G:2008
|
ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
ISO 8130-1:1992
|
Coating powders Part 1: Determination of particle size distribution by sieving |
ASTM D 609 : 2017 : REDLINE
|
Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
ISO 2859:1974
|
Sampling procedures and tables for inspection by attributes |
ASTM D 1149 : 2016-02
|
TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
AATCC EP 1 : 2012
|
GRAY SCALE FOR COLOR CHANGE |
ASTM E 50 : 2017 : REDLINE
|
Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
ASTM D 660 : 1993
|
Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
ASTM A 666 : 2015 : REDLINE
|
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
ISO 9706:1994
|
Information and documentation — Paper for documents — Requirements for permanence |
ASTM D 585 : 1997
|
Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
ISO 8130-2:1992
|
Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method) |
ASTM D 3648 : 2014 : REDLINE
|
Standard Practices for the Measurement of Radioactivity (Withdrawn 2023) |
ASTM D 2262 : 1983
|
Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse Tensile Testing Machine) (Withdrawn 1995) |
ASTM D 1711 : 2015 : REDLINE
|
Standard Terminology Relating to Electrical Insulation |
ASTM D 1120 : 2017 : REDLINE
|
Standard Test Method for Boiling Point of Engine Coolants |
ASTM D 3474 : 1990
|
PRACTICE FOR CALIBRATION AND USE OF TORQUE METERS USED IN PACKAGING APPLICATIONS |
ASTM D 5742 : 2016 : REDLINE
|
Standard Test Method for Determination of Butane Activity of Activated Carbon |
ASTM D 333 : 2001
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 6883 : 2017 : REDLINE
|
Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles |
ASTM D 2084 : 2017 : REDLINE
|
TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER |
MIL P 15328 : LATEST
|
PRIMER PRETREATMENT FORMULA 117 FOR METALS |
ASTM E 105 : 2016 : REDLINE
|
Standard Practice for Probability Sampling of Materials |
ASTM D 3546 : 2005 : R2019
|
Standard Test Method for Formic Acid in Glacial Acetic Acid |
ASTM D 5767 : 2017-09
|
TEST METHODS FOR INSTRUMENTAL MEASUREMENT OF DISTINCTNESS-OF-IMAGE GLOSS OF COATING SURFACES |
ASTM D 3362 : 2005
|
Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011) |
ASTM E 275 : 2008
|
Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
ASTM D 996 : 2016 : REDLINE
|
Standard Terminology of Packaging and Distribution Environments |
ASTM D 1200 : 2010
|
Standard Test Method for Viscosity by Ford Viscosity Cup |
ASTM D 7036 : 2016 : REDLINE
|
Standard Practice for Competence of Air Emission Testing Bodies |
ASTM E 260 : 1996
|
Standard Practice for Packed Column Gas Chromatography |
ASTM E 284 : 2017 : REDLINE
|
Standard Terminology of Appearance |
MIL P 15929 : C
|
PRIMER COATING, SHIPBOARD, VINYL-RED LEAD (FORMULA 119 - FOR HOT SPRAY) |
ISO 8130-8:1994
|
Coating powders Part 8: Assessment of the storage stability of thermosetting powders |
IEC 60567:2011
|
Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
ASTM D 1287 : 2011 : REDLINE
|
Standard Test Method for pH of Engine Coolants and Antirusts |
TAPPI T 400 : 2011
|
SAMPLING AND ACCEPTING A SINGLE LOT OF PAPER, PAPERBOARD, CONTAINERBOARD, OR RELATED PRODUCT |
ASTM D 5712 : 2015 : REDLINE
|
Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method |
ASTM D 1732 : 2003
|
Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
ASTM D 5289 : 2017 : REDLINE
|
TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
IEEE/ASTM SI_10-2010
|
American National Standard for Metric Practice |
ASTM D 322 : 1997
|
Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation |
EN 1943 : 2002
|
SELF ADHESIVE TAPES - MEASUREMENT OF STATIC SHEAR ADHESION |
ASTM D 610 : 2008
|
Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
ASTM E 200 : 2016 : REDLINE
|
Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
ASTM D 1921 : 2012-09
|
TEST METHODS FOR PARTICLE SIZE (SIEVE ANALYSIS) OF PLASTIC MATERIALS |
ASTM E 180 : 2003
|
Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
ASTM D 2244 : 2016 : REDLINE
|
Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 661 : 1993
|
Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
ASTM D 2247 : 2015 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
ASTM D 662 : 1993
|
Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
ASTM G 154 : 2016 : REDLINE
|
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
TAPPI T 544 : 2008
|
AGING OF PAPER AND BOARD WITH MOIST HEAT |
GPA 2261 : 2013
|
ANALYSIS FOR NATURAL GAS AND SIMILAR GASEOUS MIXTURES BY GAS CHROMATOGRAPHY |
ASTM D 1121 : 2011 : REDLINE
|
Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
ASTM D 2867 : 2017 : REDLINE
|
Standard Test Methods for Moisture in Activated Carbon |
IEEE C57.104-2008
|
IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
ASTM G 152 : 2013 : REDLINE
|
Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM D 1968 : 2015
|
Standard Terminology Relating to Paper and Paper Products |
ASTM D 3402 : 1993
|
Standard Test Method for Tumbler Test for Coke |
ISO 2233:2000
|
Packaging Complete, filled transport packages and unit loads Conditioning for testing |
ASTM B 152/B152M : 2013 : REDLINE
|
Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar |
NFPA 86 : 2015
|
OVENS AND FURNACES |
GPA 2145 : 2016
|
TABLE OF PHYSICAL PROPERTIES FOR HYDROCARBONS AND OTHER COMPOUNDS OF INTEREST TO NATURAL GAS AND NATURAL GAS LIQUIDS INDUSTRIES |
AATCC TM 116 : 2013
|
COLORFASTNESS TO CROCKING: ROTARY VERTICAL CROCKMETER METHOD |
ASTM D 3182 : 2016 : REDLINE
|
Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
ISO 8130-7:1992
|
Coating powders Part 7: Determination of loss of mass on stoving |
ASTM D 3134 : 2015 : REDLINE
|
Standard Practice for Establishing Color and Gloss Tolerances |
ASTM D 1735 : 2014 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
ASTM D 3888 : 2015 : REDLINE
|
Standard Terminology for Yarn Spinning Systems |
ASTM E 394 : 2015 : REDLINE
|
Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method |
ASTM C 136 : 2006
|
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM D 2060 : 2014
|
Standard Test Methods for Measuring Zipper Dimensions |
ASTM D 2765 : 2016 : REDLINE
|
Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics |
ASTM D 2633 : 2013-03
|
TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
CFR 29(PT1910.1000 TO END) : 0
|
LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
ASTM D 4587 : 2011 : REDLINE
|
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
ASTM D 5750/D5750M : 1995
|
Standard Guide for Width and Length of Pressure-Sensitive Tape |
TAPPI T 401 : 2015
|
FIBER ANALYSIS OF PAPER AND PAPERBOARD |
ASTM D 3171 : 2015 : REDLINE
|
Standard Test Methods for Constituent Content of Composite Materials |
ASTM D 907 : 2015 : REDLINE
|
Standard Terminology of Adhesives |
TAPPI T 511 : 2013
|
FOLDING ENDURANCE OF PAPER (MIT TESTER) |
ASTM D 7091 : 2013 : REDLINE
|
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
ASTM B 209 : 2014 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
ASTM E 11 : 2017 : REDLINE
|
Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
ASTM E 220 : 2013 : REDLINE
|
Standard Test Method for Calibration of Thermocouples By Comparison Techniques |
ASTM D 2050 : 2011
|
Standard Terminology Relating to Fasteners and Closures Used with Textiles |
ASTM E 430 : 2011 : REDLINE
|
Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry |
ASTM D 3790 : 2017 : REDLINE
|
Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying |
ASTM G 155 : 2013 : REDLINE
|
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
CFR 16(PTS0-149) : JAN 96
|
COMMERCIAL PRACTICES |
ASTM D 2794 : 1993
|
TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
ISO 2476:2014
|
Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures |
AATCC TM8-2016e(2022)e
|
COLORFASTNESS TO CROCKING: CROCKMETER METHOD |
ASTM D 5386 : 2016 : REDLINE
|
Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM E 104 : 2002
|
Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
ASTM D 257 : 2014 : REDLINE
|
Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
ISO 8130-9:1992
|
Coating powders Part 9: Sampling |
PPP-C-2020 Revision A:1994
|
CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF |
ASTM G 147 : 2017 : REDLINE
|
Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
ISO 8130-12:1998
|
Coating powders Part 12: Determination of compatibility |
TAPPI T 452 : 2008
|
BRIGHTNESS OF PULP, PAPER AND PAPERBOARD (DIRECTIONAL REFLECTANCE AT 457 NM) |
AATCC TM 16 : 2004
|
COLORFASTNESS TO LIGHT |
ASTM D 1717 : 1961 : R1975
|
Method of Test for Analysis of Commercial Butane-Butiene Mixtures and Isolutylene by Gas Chromatography (Withdrawn 1982) |
ICEA T 28 562 : 2003(R2014)
|
TEST METHOD FOR MEASUREMENT OF HOT CREEP OF POLYMERIC INSULATIONS |
ASTM E 173 : 1993
|
Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
ASTM D 3330/D3330M : 2004
|
Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape |
ASTM D 434 : 1995
|
Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam (Withdrawn 2004) |
ASTM D 1474 : 1998
|
Standard Test Methods for Indentation Hardness of Organic Coatings |
AATCC EP 8 : 2010
|
9-STEP CHROMATIC TRANSFERENCE SCALE |
ASTM D 658 : 1991
|
Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996) |
ASTM D 4483 : 2014-02
|
PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
ASTM E 202 : 2012-06
|
TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS |
ASTM D 1000 : 2017 : REDLINE
|
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
TAPPI T 425 : 2011
|
OPACITY OF PAPER (15/D GEOMETRY, ILLUMINANT A/2 DEGREES, 89% REFLECTANCE BACKING AND PAPER BACKING) |
ASTM D 2234/D2234M : 2017 : REDLINE
|
Standard Practice for Collection of a Gross Sample of Coal |
ASTM D 522 : 1993 : REV A
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
ISO 8130-14:2004
|
Coating powders Part 14: Terminology |
ASTM D 2454 : 2014-03
|
PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS |
ASTM D 1881 : 1997 : R2002 : EDT 2
|
Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
TAPPI T 410 : 2013
|
GRAMMAGE OF PAPER AND PAPERBOARD (WEIGHT PER UNIT AREA) |
ASTM D 3387 : 2011 : REDLINE
|
Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) |
GPA 2172 : 2014
|
CALCULATION OF GROSS HEATING VALUE, RELATIVE DENSITY, COMPRESSIBILITY AND THEORETICAL HYDROCARBON LIQUID CONTENT FOR NATURAL GAS MIXTURES FOR CUSTODY TRANSFER |
ASTM D 5531 : 2017 : REDLINE
|
Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
ASTM D 3359 : 2017 : REDLINE
|
Standard Test Methods for Rating Adhesion by Tape Test |
ASTM E 1331 : 2015 : REDLINE
|
Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
ASTM D 1895 : 2017 : REDLINE
|
Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
ASTM D 470 : 2013 : REDLINE
|
Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
ASTM E 128 : 1999
|
Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use |
ASTM D 1945 : 2014 : REDLINE
|
Standard Test Method for Analysis of Natural Gas by Gas Chromatography |
ASTM D 1560 : 2015 : REDLINE
|
Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus |
ISO 8130-3:1992
|
Coating powders Part 3: Determination of density by liquid displacement pyknometer |
ASTM D 1693 : 2015 : REDLINE
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ASTM E 168 : 2016
|
Standard Practices for General Techniques of Infrared Quantitative Analysis |