ASTM D 1349 : 2014 : R2024
Current
The latest, up-to-date edition.
Standard Practice for Rubber—Standard Conditions for Testing
Hardcopy , PDF
English
01-11-2024
Committee |
D 11
|
DocumentType |
Standard Practice
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1Reliable comparisons between different rubber compounds and between different laboratories is an essential component of effective testing.
1.2It is necessary to standardize the temperature and humidity conditions to which materials are subjected prior to and during testing.
1.3Section 2 of this practice includes the definition of terms commonly used to describe the conditions of testing.
1.4Section 3 of this practice covers a list of standard test temperatures for testing from which selection may be made for a specification, procedure, practice, standard or method.
1.4.1Any specification, procedure, practice, standard or method that specifies test temperatures shall take precedence over this practice.
1.4.2The standard test temperatures for testing do not apply to preparation, mixing, processing, or vulcanizing temperatures for rubber compounds.
1.5Section 4 of this practice covers a list of standard relative humidity conditions for testing from which selection may be made for a specification, procedure, practice, standard or method.
1.5.1Any specification, procedure, practice, standard or method that specifies relative humidity shall take precedence over this practice.
1.5.2The standard relative humidity conditions for testing do not apply to preparation, mixing, processing, or vulcanizing of rubber compounds, but may serve as a guide when the condition is not specified.
1.6Section 5 of this practice covers the standard conditioning of materials for testing.
1.6.1Any specification, procedure, practice, standard or method that specifies the conditioning of materials for testing shall take precedence over this practice.
1.7Section 6 of this practice includes the keywords associated with this document which may be used in standard document or internet searches.
1.8The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.10This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 623 : 2007 : R2019 : EDT 1 | Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
ASTM D 395 : 2018 | Standard Test Methods for Rubber Property—Compression Set |
ASTM F 1035 : 2023 | Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System |
ASTM D 573 : 2004 : R2019 | Standard Test Method for Rubber—Deterioration in an Air Oven |
ASTM D 3575 : 2020 | Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers |
ASTM F 1441 : 2003 : R2022 | Standard Specification for Soft-Tissue Expander Devices |
ASTM D 6515 : 2000 : R2023 : EDT 1 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
ASTM F 2051 : 2000 : R2022 | Standard Specification for Implantable Saline-Filled Breast Prostheses |
ASTM D 3389 : 2021 | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
ASTM D 2000 : 2018 | Standard Classification System for Rubber Products in Automotive Applications |
ASTM D 430 : 2006 : R2018 | Standard Test Methods for Rubber Deterioration—Dynamic Fatigue |
ASTM D 3771 : 2015 : R2022 | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
ASTM D 3667 : 2016 : R2022 | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
ASTM F 477 : 2014 : R2021 | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
ASTM F 2468 : 2005 : R2019 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
ASTM D 5099 : 2008 : R2022 | Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
ASTM D 1630 : 2016 : R2021 | Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader) |
ASTM D 1052 : 2009 : R2019 | Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus |
ASTM F 2042 : 2018 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
ASTM D 1456 : 1986 : R2020 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
ASTM D 624 : 2000 : R2020 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
ASTM D 1415 : 2018 | Standard Test Method for Rubber Property—International Hardness |
ASTM D 5289 : 2019 : REV A | Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters |
ASTM D 7605 : 2011 : R2022 | Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers |
ASTM G 114 : 2021 | Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service |
ASTM D 531 : 2015 : R2019 | Standard Test Method for Rubber Property—Pusey and Jones Indentation |
ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
ASTM D 751 : 2019 | Standard Test Methods for Coated Fabrics |
ASTM F 2508 : 2023 | Standard Practice for Validation of Walkway Tribometry Using Research-based Reference Materials |
ASTM F 703 : 2018 : R2022 | Standard Specification for Implantable Breast Prostheses |
ASTM D 3903 : 2015 : R2022 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
ASTM D 7121 : 2005 : R2024 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
ASTM F 1957 : 2024 | Standard Test Method for Composite Foam Hardness-Durometer Hardness |
ASTM D 1646 : 2019 : REV A | Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) |
ASTM D 865 : 2011 : R2018 | Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure) |
ASTM D 3832 : 1979 : R2022 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
ASTM D 1460 : 1986 : R2020 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
ASTM D 813 : 2007 : R2019 | Standard Test Method for Rubber Deterioration—Crack Growth |
ASTM D 6147 : 1997 : R2020 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
ASTM D 6601 : 2019 | Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer |
ASTM D 2084 : 2019 : REV A | Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter |
ASTM D 2240 : 2015 : R2021 | Standard Test Method for Rubber Property—Durometer Hardness |
ASTM D 1149 : 2018 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
ASTM D 6746 : 2015 : R2020 | Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.