ASTM D 1353 : 2013 : REDLINE
Current
Current
The latest, up-to-date edition.
Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
Available format(s)
PDF
Language(s)
English
Published date
01-02-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 06.04, 2017 Describes the determination of the non-volatile matter in volatile solvents for use in paint, varnish, lacquer, and related products.
| Committee |
D 01
|
| DevelopmentNote |
Supersedes ASTM UOP 810. (05/2011)
|
| DocumentType |
Redline
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method covers the determination of the nonvolatile matter in volatile solvents for use in paint, varnish, lacquer, and related products.
1.2The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4For hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this test method.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 5.
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| MIL-PRF-32405 Base Document:2013 | CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| MIL-PRF-32359 Base Document:2012 | CLEANER, GENERAL, FOR GROUND VEHICLES AND GROUND SUPPORT EQUIPMENT, HAP-FREE |
| CGSB 15.52 : 1992 | TECHNICAL GRADE METHYL ETHYL KETONE |
| A-A-3007 Base Document:1996 | THINNER, FOR PHENOL-FORMALDEHYDE AND MEDIUM OIL AND STYRENATED ALKYD PAINTS AND VARNISHES |
| TT-A-511 Revision E:1992 | AMYL ACETATE, TECHNICAL |
| ASTM D 2832 : 1992 : R2011 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| NASA MSFC SPEC 2490 : 1995 | CLEANER, ORGANIC WITH D-LIMONENE |
| SAE AMSC27725D | Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C) |
| ASTM D 7670 : 2010 | Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters |
| ASTM D 329 : 2007 : R2013 | Standard Specification for Acetone |
| ASTM D 1152 : 2006 : R2012 | Standard Specification for Methanol (Methyl Alcohol) (Withdrawn 2021) |
| ASTM D 2634 : 2007 : R2013 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
| ASTM D 2635 : 2007 : R2012 | Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021) |
| ASTM D 1836 : 2007 : R2013 | Standard Specification for Commercial Hexanes |
| ASTM D 3131 : 2007 : R2013 | Standard Specification for Isopropyl Acetate (99 % Grade) |
| P-W-2891 Revision A:2002 | WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
| TT-N-97 Revision D:2007 | Naphtha; Aromatic |
| CGSB-1.4 : 2000 CORR 2000 | PETROLEUM SPIRITS THINNER |
| O-A-51 Revision H:1992 | ACETONE, TECHNICAL |
| ASTM D 4965 : 1996 : R2008 | Standard Terminology of Seams and Seam Finishes Used in Home Sewing (Withdrawn 2011) |
| TT-E-781 Revision D:1992 | ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL |
| ASTM D 4710 : 2007 | Standard Specification for Acetaldehyde |
| ASTM D 2635 : 2007 | Standard Specification for Methyl Isobutyl Carbinol |
| ASTM D 2804 : 2002 : R2012 | Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography (Withdrawn 2021) |
| SAE AMS3167B | Solvents, Wipe for Cleaning Prior to Application of Primer and Top Coat Materials, or Sealing Compounds |
| ASTM D 3131 :2007 | Standard Specification for Isopropyl Acetate (99 % Grade) |
| ASTM D 2832 : 1992 : R2016 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM D 268 : 2001 : R2007 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM D 329 : 2007 : EDT 1 | Standard Specification for Acetone <a href="#fn00002"></a> |
| ASTM D 1718 : 2009 : R2017 | Standard Specification for Isobutyl Acetate (95 % Grade) |
| ASTM D 268 : 2001 : R2012 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021) |
| ASTM D 2627 : 2008 : R2012 | Standard Specification for Diacetone Alcohol (Withdrawn 2021) |
| ASTM D 4615 : 2012 : REDLINE | Standard Specification for n-Butyl Acetate (All Grades) |
| MIL-PRF-32295 Revision B:2017 | CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE |
| TT-E-776 Revision B:1960 | ETHYLENE GLYCOL MONOBUTYL ETHER (FOR USE IN ORGANIC COATINGS) |
| ASTM D 268 : 2001 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material |
| ASTM E 1145 : 1987 : R1992 : EDT 1 | Specification for Denatured Ethyl Alcohol, Formula 3A (Withdrawn 1993) |
| ASTM D 2627 : 2008 | Standard Specification for Diacetone Alcohol |
| ASTM D 1153 : 2012 : REDLINE | Standard Specification for Methyl Isobutyl Ketone |
| ASTM D 128 : 1998 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM F 311 : 2008 : R2013 | Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
| ASTM D 2804 : 2002 : R2007 | Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography |
| ASTM D 329 : 2007 | Standard Specification for Acetone |
| ASTM D 128 : 1998 : R2003 : EDT 1 | Standard Test Methods for Analysis of Lubricating Grease |
| CGSB 15.50 : 1992 | TECHNICAL GRADE ACETONE |
| ASTM D 128 : 1998 : R2014 : EDT 1 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 4965 : 1996 | Standard Terminology of Seams and Seam Finishes in Home Sewing |
| ASTM D 7670 : 2010 : R2017 | Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters |
| MIL-PRF-32597 Base Document:2018 | CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE |
| ASTM D 128 : 1998 : R2014 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 128 : 1998 : R2008 | Standard Test Methods for Analysis of Lubricating Grease |
| ASTM D 1152 : 2006 | Standard Specification for Methanol (Methyl Alcohol) |
| ASTM D 4710 : 2007 : R2012 | Standard Specification for Acetaldehyde (Withdrawn 2021) |
| ASTM D 2832 : 1992 : R1999 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM D 4140 : 2007 | Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| O M 00232 : H | METHANOL (METHYL ALCOHOL) |
| ASTM D 4965 : 1996 : R2002 | Standard Terminology of Seams and Seam Finishes in Home Sewing |
| SAE AMS1450A | Disinsectant (Insecticide), Aircraft |
| O-M-232 Revision M:2016 | METHANOL (METHYL ALCOHOL) |
| ASTM F 311 : 2008 | Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
| O-E-760 Revision D:1987 | ETHYL ALCOHOL (ETHANOL), DENATURED ALCOHOL, PROPRIETARY SOLVENTS & SPECIAL INDUSTRIAL SOLVENTS |
| O-E-751 Revision D:2015 | ETHER, PETROLEUM; TECHNICAL GRADE |
| ASTM D 2832 : 1992 : R2005 | Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings |
| ASTM F 65 : 1968 : R1983 | Specification for Primary Amyl Acetate (Mixed Isomers) for Use in Fabricating Electron Devices (Withdrawn 1989) |
| ASTM D 4140 : 2007 : R2013 | Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents |
| ASTM D 2804 : 2002 | Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 2634 : 2007 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
| ASTM D 1836 : 2007 | Standard Specification for Commercial Hexanes |
| ASTM D 1718 : 2009 | Standard Specification for Isobutyl Acetate (95% Grade) |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.