Skip to content
Please enter a keyword to search

  • GOST 849:2018

    Current The latest, up-to-date edition.

    Primary nickel. SpecificationsE

    Available format(s):  Hardcopy

    Language(s):  Russian

    Published date:  05-09-2018

    Publisher:  Interstandard (Russia)

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 15.06, 2017 Defines the determination of the relative peel resistance of adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing.

    Scope - (Show below) - (Hide below)

    1.1 This specification covers polyolefin monofilament yarn materials, and test methods for standard polyolefin monofilaments. While designed primarily for testing standard polyolefin monofilaments, many of the procedures can be used, with little or no modification, for other polyolefin monofilaments. However, testing on non-standard polyolefin monofilaments should be conducted with caution. See 3.1 for a definition of standard polyolefin monofilament.
    1.2 Only on condition that interlaboratory precision data are available for the specific procedure is any test method described, or referenced in this specification, recommended for acceptance testing of commercial shipments of polyolefin monofilaments.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 3195. (08/2010) Supersedes ASTM D 3195. (08/2010) Supersedes ASTM D 84. (02/2002) Supersedes ASTM D 84. (02/2002) Supersedes ASTM D 84. (02/2002) Supersedes ASTM D 84. (02/2002) Supersedes O A 51 (07/2004) Supersedes O A 51 (07/2004) Supersedes MIL P 22241 (07/2004) Supersedes MIL P 22241 (07/2004) Also numbered as AASHTO T 279. (05/2013) Also numbered as AASHTO T 279. (05/2013) Supersedes ASTM D 3330. (07/2010) Supersedes ASTM D 3330. (07/2010) Supersedes ASTM D 2088. (02/2002) Supersedes ASTM D 2088. (02/2002)
    Document Type Standard
    Product Note Reconfirmed EV A Reconfirmed 2017 Reconfirmed 2010 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed 2001 Reconfirmed 1995 Reconfirmed 2007 Reconfirmed 2003 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed 1994 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2007 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2017 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed EV (1999) Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2014 Reconfirmed 2010 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed 2000 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 1998 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 1995 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 1993 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed EN Reconfirmed 2016 Reconfirmed 2012 Reconfirmed EDT 1 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2010 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed EV A Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2014 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 1995 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 1996 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed EDT 1 Reconfirmed 1995 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed 2013 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2001 Reconfirmed 1997 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2014 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2002 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2015 Reconfirmed 2011 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 1998 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2007 Reconfirmed 2013 Reconfirmed 2006 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2014 Reconfirmed 2009
    Publisher Interstandard (Russia)
    Status Current
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1353 : 2013 : REDLINE Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
    ASTM D 1071 : 2017 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
    ASTM D 75 : 2003 Standard Practice for Sampling Aggregates
    ASTM D 115 : 2017 : REDLINE Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
    ASTM E 122 : 2017 : REDLINE Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
    ASTM D 3418 : 2015 : REDLINE Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
    ASTM D 870 : 2015 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
    TAPPI T 236 : 2013 KAPPA NUMBER OF PULP
    ASTM E 1 : 2014 : REDLINE Standard Specification for ASTM Liquid-in-Glass Thermometers
    ASTM D 1129 : 2013 : REDLINE Standard Terminology Relating to Water
    ISO 12086-1:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications
    ASTM D 3176 : 2015 : REDLINE Standard Practice for Ultimate Analysis of Coal and Coke
    ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
    ASTM E 177 : 2014 : REDLINE Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
    ASTM D 2258 : 1999 Standard Practice for Sampling Yarn for Testing
    ASTM D 646 : 2013 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) (Withdrawn 2022)
    ASTM D 529 : 2004 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials (Withdrawn 2013)
    ASTM D 1729 : 2016 : REDLINE Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
    ASTM D 484 : LATEST SPECIFICATION FOR HYDROCARBON DRY CLEANING SOLVENTS
    TAPPI T 411 : 2010 THICKNESS (CALIPER) OF PAPER, PAPERBOARD, AND COMBINED BOARD
    ASTM D 823 : 1995 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
    ASTM D 2463 : 2015 : REDLINE Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
    ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
    ASTM D 1613 : 2017 : REDLINE Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
    ASTM D 3424 : 2011 : REDLINE Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
    ASTM D 609 : 2017 : REDLINE Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
    ASTM D 2029 : 1997 Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
    ASTM D 3666 : 2016 : REDLINE Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
    ASTM D 660 : 1993 Standard Test Method for Evaluating Degree of Checking of Exterior Paints
    ASTM A 666 : 2015 : REDLINE Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
    ISO 9706:1994 Information and documentation — Paper for documents — Requirements for permanence
    ASTM D 585 : 1997 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
    ASTM D 1711 : 2015 : REDLINE Standard Terminology Relating to Electrical Insulation
    ASTM D 3699 : 2013-05 SPECIFICATION FOR KEROSINE
    ASTM D 1238 : 2013 : REDLINE Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
    ASTM D 1455 : 2017 : REDLINE Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
    ASTM D 2084 : 2017 : REDLINE TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER
    ASTM E 105 : 2016 : REDLINE Standard Practice for Probability Sampling of Materials
    ISO 12086-2:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
    ASTM E 275 : 2008 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
    ASTM D 996 : 2016 : REDLINE Standard Terminology of Packaging and Distribution Environments
    ASTM D 1200 : 2010 Standard Test Method for Viscosity by Ford Viscosity Cup
    NAPM IT9.16 : 1993 IMAGING MEDIA - PHOTOGRAPHIC ACTIVITY TEST
    ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
    ASTM D 1959 : 1997 Standard Test Method for Iodine Value of Drying Oils and Fatty Acids (Withdrawn 2006)
    ASTM F 477 : 2014 : REDLINE Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    ASTM E 260 : 1996 Standard Practice for Packed Column Gas Chromatography
    ASTM D 1076 : 2015 : REDLINE Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
    TAPPI T 489 : 2013 BENDING RESISTANCE (STIFFNESS) OF PAPER AND PAPERBOARD (TABER-TYPE TESTER IN BASIC CONFIGURATION)
    ASTM D 16 : 2016 : REDLINE TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS
    ASTM D 86 : 2017-06 TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE
    TAPPI T 400 : 2011 SAMPLING AND ACCEPTING A SINGLE LOT OF PAPER, PAPERBOARD, CONTAINERBOARD, OR RELATED PRODUCT
    ASTM D 1732 : 2003 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
    ASTM E 2251 : 2014 : REDLINE Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
    ASTM D 2176 : 2016 Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
    ASTM D 5289 : 2017 : REDLINE TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS
    ASTM D 3267 : 2012 : REDLINE Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
    IEEE/ASTM SI_10-2010 American National Standard for Metric Practice
    ASTM D 545 : 2014 : REDLINE Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
    ASTM D 1781 : 1998 Standard Test Method for Climbing Drum Peel for Adhesives
    ASTM D 2197 : 2016 : REDLINE Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
    ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
    ASTM D 610 : 2008 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
    ASTM E 200 : 2016 : REDLINE Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
    ASTM D 1921 : 2012-09 TEST METHODS FOR PARTICLE SIZE (SIEVE ANALYSIS) OF PLASTIC MATERIALS
    ASTM E 180 : 2003 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009)
    ASTM D 1533 : 2012 : REDLINE Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
    ASTM D 2244 : 2016 : REDLINE Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
    IEC 60172:2015 Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
    ASTM D 661 : 1993 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
    ASTM D 662 : 1993 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
    ASTM B 344 : 2014 : REDLINE Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements
    ASTM D 3266 : 1991 : R2018 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
    TAPPI T 544 : 2008 AGING OF PAPER AND BOARD WITH MOIST HEAT
    IEEE C57.104-2008 IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
    ASTM D 1968 : 2015 Standard Terminology Relating to Paper and Paper Products
    ISO 13000-1:2005 Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 1: Requirements and designation
    EN 1939 : 2003 SELF ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES
    ASTM D 3182 : 2016 : REDLINE Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
    ASTM D 985 : 1997 Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
    ASTM D 2939 : 2003 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012)
    ASTM D 1735 : 2014 : REDLINE Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
    ASTM D 790 : 2017 : REDLINE Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
    ASTM C 778 : 2017 : REDLINE Standard Specification for Standard Sand
    ASTM D 5750/D5750M : 1995 Standard Guide for Width and Length of Pressure-Sensitive Tape
    ASTM D 93 : 2016-07 TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER
    TAPPI T 401 : 2015 FIBER ANALYSIS OF PAPER AND PAPERBOARD
    ASTM D 907 : 2015 : REDLINE Standard Terminology of Adhesives
    TAPPI T 511 : 2013 FOLDING ENDURANCE OF PAPER (MIT TESTER)
    ASTM G 7 : 2005 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
    ASTM E 337 : 2015 : REDLINE Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
    ASTM D 2755 : 1990 : R1997 : EDT 1 Standard Test Method of Sampling and Reduction to Test Weight of Electrical Grade Magnesium Oxide (Withdrawn 2003)
    ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
    ASTM D 1639 : 1990 : R1996 : EDT 1 Standard Test Method for Acid Value of Organic Coating Materials (Withdrawn 2005)
    ASTM D 3180 : 2015 : REDLINE Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
    ASTM E 137 : 1982 : R1987 Practice for Evaluation of Mass Spectrometers for Quantitative Analysis from a Batch Inlet (Withdrawn 1992)
    ASTM F 913 : 2002 : EDT 1 Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    ASTM D 2122 : 2016 : REDLINE Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    ASTM D 3224 : 2002 Standard Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions (Withdrawn 2006)
    ASTM D 5386 : 2016 : REDLINE Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
    ASTM D 3835 : 2016 : REDLINE Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
    ASTM D 1211 : 1997 Standard Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to Wood (Withdrawn 2006)
    ASTM D 257 : 2014 : REDLINE Standard Test Methods for DC Resistance or Conductance of Insulating Materials
    ASTM D 2204 : 1965 : R1970 Method of Test for Perspiration Resistance of Organic Coatings (Withdrawn 1975)
    PPP-C-2020 Revision A:1994 CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF
    ISO 3680:2004 Determination of flash/no flash Rapid equilibrium closed cup method
    ASTM D 2565 : 2016 : REDLINE Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
    TAPPI T 452 : 2008 BRIGHTNESS OF PULP, PAPER AND PAPERBOARD (DIRECTIONAL REFLECTANCE AT 457 NM)
    MIL-P-46105 Base Document:1966 PRIMER COATING: WELD-THROUGH, ZINC-RICH
    ASTM D 2246 : 1987 Standard Method of Testing Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking (Withdrawn 1992)
    ASTM E 203 : 2016 : REDLINE Standard Test Method for Water Using Volumetric Karl Fischer Titration
    ASTM D 1474 : 1998 Standard Test Methods for Indentation Hardness of Organic Coatings
    ASTM D 2606 : 1994 : R2000 Standard Test Method for Solubility of Pentachlorophenol in Heavy Hydrocarbon Solvents (Withdrawn 2006)
    ASTM D 658 : 1991 Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996)
    ASTM D 4483 : 2014-02 PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
    ASTM D 685 : 2017 : REDLINE Standard Practice for Conditioning Paper and Paper Products for Testing
    ASTM D 2090 : 1998 Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids (Withdrawn 2007)
    TAPPI T 425 : 2011 OPACITY OF PAPER (15/D GEOMETRY, ILLUMINANT A/2 DEGREES, 89% REFLECTANCE BACKING AND PAPER BACKING)
    ISO 13000-2:2005 Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties
    FED-STD-141 Revision D:2001 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING
    ASTM D 542 : 2014 : REDLINE Standard Test Method for Index of Refraction of Transparent Organic Plastics
    ASTM D 1475 : 2013 : REDLINE Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
    ASTM D 522 : 1993 : REV A Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
    ASTM D 2454 : 2014-03 PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS
    TAPPI T 410 : 2013 GRAMMAGE OF PAPER AND PAPERBOARD (WEIGHT PER UNIT AREA)
    ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
    ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
    ASTM D 3270 : 2013 : REDLINE Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
    ASTM D 374 : 1999 Standard Test Methods for Thickness of Solid Electrical Insulation
    ASTM D 589 : 1997 Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing)
    ASTM D 3892 : 2015 : REDLINE PRACTICE FOR PACKAGING/PACKING OF PLASTICS
    ASTM D 5423 : 2014 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
    ISO 2322:2014 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective