ASTM D 1356 : 2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Sampling and Analysis of Atmospheres
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
01-05-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 22
|
| DocumentType |
Reference Material
|
| Pages |
14
|
| ProductNote |
Reconfirmed 2005
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This terminology is a collective vocabulary relating to sampling and analysis of atmospheres. As a convenience to general interest, it contains most of the standard terms, definitions, and nomenclature under the jurisdiction of Committee D22.
1.2 Many of the entries in this terminology are copied (with attribution) from standards of origin referenced in Section 2. The standard of origin are noted in bold type at the right margin of the applicable definition.
1.3 Certain terms in the common language that comprise multiple concepts are included herein with the definition specific to standards and practices of Committee D22.
| ASTM D 8208 : 2019 | Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler |
| ASTM D 5955 : 2002 : R2017 : EDT 1 | Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM (Withdrawn 2022) |
| ASTM D 4600 : 1995 : R2016 | Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres |
| ASTM D 5953M : 2016 | Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection |
| ASTM D 7910 : 2014 | Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift |
| ASTM D 5791 : 1995 : R2017 | Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings |
| ASTM D 6331 : 2016 | Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| ASTM D 3796 : 2009 : R2016 | Standard Practice for Calibration of Type S Pitot Tubes |
| ASTM D 5366 : 1996 : R2017 | Standard Test Method for Determining the Dynamic Performance of a Wind Vane |
| ASTM D 5156 : 2002 : R2016 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| ASTM E 800 : 2014 | Standard Guide for Measurement of Gases Present or Generated During Fires |
| ASTM D 3609 : 2000 : R2014 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 7658 : 2017 | Standard Test Method for Direct Microscopy of Fungal Structures from Tape |
| ASTM D 7911 : 2014 | Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
| ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM D 3631 : 1999 : R2017 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 7520 : 2016 | Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere |
| ASTM D 3154 : 2014 | Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ASTM D 6552 : 2006 : R2016 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM D 6420 : 2018 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
| ASTM D 5527 : 2000 : R2017 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 6281 : 2015 | Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
| ASTM D 6522 : 2011 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers |
| ASTM D 7439 : 2014 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| ASTM D 4185 : 2017 | Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry |
| ASTM D 7200 : 2012 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy (Withdrawn 2021) |
| ASTM D 7339 : 2018 | Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography |
| ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
| ASTM D 7659 : 2010 : R2015 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
| ASTM D 6056 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020) |
| ASTM D 7036 : 2016 | Standard Practice for Competence of Air Emission Testing Bodies |
| ASTM D 7201 : 2006 : R2011 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy) |
| ASTM D 5836 : 2008 : R2013 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
| ASTM D 3687 : 2007 : R2012 | Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| ASTM D 6784 : 2016 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) |
| ASTM D 4298 : 2004 : R2014 : EDT 1 | Standard Guide for Intercomparing Permeation Tubes to Establish Traceability |
| ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM D 7614 : 2012 | Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements |
| ASTM D 5111 : 2012 | Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations |
| ASTM E 337 : 2015 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 7948 : 2014 : EDT 1 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| ASTM D 6329 : 1998 : R2015 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM D 7143 : 2017 | Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ASTM D 3162 : 2012 | Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry) |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM D 3464 : 1996 : R2014 | Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer |
| ASTM E 1998 : 2011 : R2018 | Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
| ASTM D 6670 : 2018 | Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ASTM D 4532 : 2015 | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
| ASTM D 6209 : 2013 | Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
| ASTM D 5075 : 2001 : R2017 : EDT 1 | Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air |
| ASTM D 6177 : 2014 | Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 1914 : 1995 : R2014 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| ASTM D 4323 : 2015 | Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance |
| ASTM D 7034 : 2018 | Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations |
| ASTM D 7788 : 2014 | Standard Practice for Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology |
| ASTM D 6306 : 2017 | Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air |
| ASTM D 6561 : 2006 : R2016 | Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace |
| ASTM D 7035 : 2016 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 7202 : 2015 | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
| ASTM D 4230 : 2002 : R2012 | Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM D 7859 : 2019 | Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers |
| ASTM D 6803 : 2013 | Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers |
| ASTM D 8068 : 2019 | Standard Practice for Collection of Culturable Airborne Fungi or Bacteria on Agar Plates by Inertial Impaction Systems |
| ASTM D 6966 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
| ASTM D 6057 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy (Withdrawn 2020) |
| ASTM D 3195/D3195M : 2010 : R2015 | Standard Practice for Rotameter Calibration |
| ASTM F 1977 : 2004 : R2017 | Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System |
| ASTM D 3267 : 2012 | Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| ASTM E 2693 : 2014 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
| ASTM D 5952 : 2008 : R2015 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024) |
| ASTM D 2913 : 2014 | Standard Test Method for Mercaptan Content of the Atmosphere |
| ASTM E 2993 : 2016 | Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone |
| ASTM D 5741 : 1996 : R2017 | Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer |
| ASTM D 6058 : 1996 : R2016 | Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment |
| ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM D 7392 : 2007 : R2013 | Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants |
| ASTM D 6216 : 2012 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications |
| ASTM D 6176 : 1997 : R2015 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors |
| ASTM D 6480 : 2019 | Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy |
| ASTM D 4599 : 2014 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters |
| ASTM D 7296 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds |
| ASTM D 5096 : 2002 : R2017 | Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer |
| ASTM D 5835 : 1995 : R2013 | Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations |
| ASTM D 5578 : 2004 : R2015 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) (Withdrawn 2024) |
| ASTM D 5197 : 2016 | Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
| ASTM D 7822 : 2018 | Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids |
| ASTM D 4430 : 2000 : R2015 | Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM E 2267 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022) |
| ASTM D 6332 : 2012 : R2017 | Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ASTM D 4913 : 2000 : R2016 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors (Withdrawn 2023) |
| ASTM D 6011 : 1996 : R2015 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
| ASTM D 1608 : 2016 | Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023) |
| ASTM D 4096 : 2017 | Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method) |
| ASTM D 6327 : 2010 : R2016 | Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
| ASTM D 6832 : 2013 : R2018 | Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide |
| ASTM D 6059 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy (Withdrawn 2020) |
| ASTM D 3685/D3685M : 2013 | Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| ASTM D 5086 : 2001 : R2013 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM F 50 : 2012 : R2015 | Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
| ASTM D 4856 : 2011 : R2016 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
| ASTM D 6830 : 2002 : R2016 | Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media |
| ASTM D 4490 : 1996 : R2016 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
| ASTM D 6363 : 1998 : R2013 | Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ASTM E 1620 : 1997 : R2016 | Standard Terminology Relating to Liquid Particles and Atomization |
| ASTM D 6348 : 2012 : EDT 1 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ASTM D 7789 : 2012 | Standard Practice for Collection of Fungal Material from Surfaces by Swab |
| ASTM D 8142 : 2017 | Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers |
| ASTM D 7144 : 2005 : REV A : R2016 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 2010/D2010M : 1998 : R2017 | Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| ASTM D 7145 : 2005 : R2015 | Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means |
| ASTM D 4766 : 1998 : R2014 | Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method) |
| ASTM D 6620 : 2019 | Standard Practice for Asbestos Detection Limit Based on Counts |
| ASTM D 5110 : 1998 : R2017 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 5011 : 2017 | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 5116 : 2017 | Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
| ASTM D 7758 : 2017 | Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations |
| ASTM D 6245 : 2018 | Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation |
| ASTM D 7459 : 2008 : R2016 | Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources |
| ASTM D 6061 : 2001 : R2018 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| ASTM D 1357 : 1995 : R2011 | Standard Practice for Planning the Sampling of the Ambient Atmosphere |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM F 2299/F2299M : 2003 : R2017 | Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres |
| ASTM D 6562 : 2012 | Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace |
| ASTM D 3824 : 2012 | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
| ASTM D 1739 : 1998 : R2017 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM D 7706 : 2017 | Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers |
| ASTM E 1370 : 2014 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
| ASTM D 6062 : 2019 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| ASTM D 8141 : 2017 | Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments |
| ASTM D 5932 : 2008 : R2013 : EDT 1 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace |
| ASTM D 5015 : 2015 | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| ASTM E 104 : 2002 : R2012 | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
| ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
| ASTM D 5149 : 2002 : R2016 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| ASTM D 4597 : 2010 : R2015 | Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers |
| ASTM D 3266 : 1991 : R2018 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ASTM D 5466 : 2015 | Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology) |
| ASTM D 6333 : 2017 | Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
| ASTM D 7297 : 2014 | Standard Practice for Evaluating Residential Indoor Air Quality Concerns |
| ASTM D 6271 : 2010 : R2016 | Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol (Withdrawn 2022) |
| ASTM D 6589 : 2005 : R2015 | Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance |
| ASTM D 3686 : 2013 | Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM D 7707 : 2011 : R2016 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
| ASTM D 3608 : 2019 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 3270 : 2013 | Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
| ASTM D 2914 : 2015 | Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) |
| ASTM D 6060 : 2017 | Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph |
| ASTM D 5280 : 1996 : R2013 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM D 5012 : 2001 : R2013 | Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
| ASTM D 4844 : 2016 | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
| ASTM D 5085 : 2002 : R2013 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM D 5337 : 2011 : R2016 | Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps |
| ASTM D 6669 : 2019 | Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints |
| ASTM D 6494 : 1999 : R2015 | Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction |
| ASTM D 6178 : 2014 | Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 6330 : 1998 : R2014 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM D 7440 : 2008 : R2015 : EDT 1 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
| ASTM C 1817 : 2016 | Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry |
| ASTM D 5157 : 1997 : R2014 | Standard Guide for Statistical Evaluation of Indoor Air Quality Models |
| ASTM E 3203 : 2019 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM D 3249 : 1995 : R2011 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 3614 : 2007 : R2013 | Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.