ASTM D 1356 : 2015 : REV B
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology Relating to Sampling and Analysis of Atmospheres
Available format(s)
Hardcopy , PDF
Superseded date
31-12-2015
Superseded by
Language(s)
English
Published date
31-12-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 22
|
| DocumentType |
Reference Material
|
| Pages |
18
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 6216 : 2012 | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications |
| ASTM D 6176 : 1997 : R2015 | Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors |
| ASTM D 6480 : 2019 | Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy |
| ASTM D 4599 : 2014 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters |
| ASTM D 7440 : 2008 : R2015 : EDT 1 | Standard Practice for Characterizing Uncertainty in Air Quality Measurements |
| ASTM C 1817 : 2016 | Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry |
| ASTM D 3614 : 2007 : R2013 | Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions |
| ASTM D 5157 : 1997 : R2014 | Standard Guide for Statistical Evaluation of Indoor Air Quality Models |
| ASTM E 3203 : 2019 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM D 3249 : 1995 : R2011 | Standard Practice for General Ambient Air Analyzer Procedures |
| ASTM D 3266 : 1991 : R2018 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ASTM D 5466 : 2015 | Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology) |
| ASTM D 6333 : 2017 | Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors |
| ASTM D 7297 : 2014 | Standard Practice for Evaluating Residential Indoor Air Quality Concerns |
| ASTM D 6271 : 2010 : R2016 | Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol (Withdrawn 2022) |
| ASTM D 6589 : 2005 : R2015 | Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance |
| ASTM D 3686 : 2013 | Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) |
| ASTM E 631 : 2015 | Standard Terminology of Building Constructions |
| ASTM D 7707 : 2011 : R2016 | Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust |
| ASTM D 3608 : 2019 | Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 3270 : 2013 | Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
| ASTM D 2914 : 2015 | Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method) |
| ASTM D 6060 : 2017 | Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph |
| ASTM D 5280 : 1996 : R2013 | Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ASTM D 5012 : 2001 : R2013 | Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition |
| ASTM D 4844 : 2016 | Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection |
| ASTM D 4913 : 2000 : R2016 | Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors (Withdrawn 2023) |
| ASTM D 6011 : 1996 : R2015 | Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer |
| ASTM D 1608 : 2016 | Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures) (Withdrawn 2023) |
| ASTM D 4096 : 2017 | Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method) |
| ASTM D 6327 : 2010 : R2016 | Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
| ASTM D 6332 : 2012 : R2017 | Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ASTM D 6832 : 2013 : R2018 | Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide |
| ASTM D 6059 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy (Withdrawn 2020) |
| ASTM D 3685/D3685M : 2013 | Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| ASTM D 5086 : 2001 : R2013 | Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry |
| ASTM F 50 : 2012 : R2015 | Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles |
| ASTM D 4856 : 2011 : R2016 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
| ASTM D 6830 : 2002 : R2016 | Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media |
| ASTM D 1914 : 1995 : R2014 | Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres |
| ASTM D 4323 : 2015 | Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance |
| ASTM D 7034 : 2018 | Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations |
| ASTM D 7788 : 2014 | Standard Practice for Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology |
| ASTM D 6306 : 2017 | Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air |
| ASTM D 6561 : 2006 : R2016 | Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace |
| ASTM D 7035 : 2016 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM D 7202 : 2015 | Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection |
| ASTM D 4230 : 2002 : R2012 | Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer |
| ASTM D 7859 : 2019 | Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers |
| ASTM D 6803 : 2013 | Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers |
| ASTM D 8068 : 2019 | Standard Practice for Collection of Culturable Airborne Fungi or Bacteria on Agar Plates by Inertial Impaction Systems |
| ASTM D 6966 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals |
| ASTM D 6057 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy (Withdrawn 2020) |
| ASTM F 1977 : 2004 : R2017 | Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System |
| ASTM D 3267 : 2012 | Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| ASTM E 2693 : 2014 | Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment |
| ASTM D 5952 : 2008 : R2015 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024) |
| ASTM D 2913 : 2014 | Standard Test Method for Mercaptan Content of the Atmosphere |
| ASTM E 2993 : 2016 | Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone |
| ASTM D 5741 : 1996 : R2017 | Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer |
| ASTM D 6058 : 1996 : R2016 | Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment |
| ASTM E 2144 : 2011 : R2016 | Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres |
| ASTM E 1370 : 2014 | Standard Guide for Air Sampling Strategies for Worker and Workplace Protection |
| ASTM D 6062 : 2019 | Standard Guide for Personal Samplers of Health-Related Aerosol Fractions |
| ASTM D 8141 : 2017 | Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments |
| ASTM D 5932 : 2008 : R2013 : EDT 1 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace |
| ASTM D 5015 : 2015 | Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination |
| ASTM E 104 : 2002 : R2012 | Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Solutions |
| ASTM D 7049 : 2017 | Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres |
| ASTM D 5149 : 2002 : R2016 | Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence |
| ASTM D 4597 : 2010 : R2015 | Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers |
| ASTM D 3195/D3195M : 2010 : R2015 | Standard Practice for Rotameter Calibration |
| ASTM D 5085 : 2002 : R2013 | Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography |
| ASTM D 5337 : 2011 : R2016 | Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps |
| ASTM D 6669 : 2019 | Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints |
| ASTM D 6494 : 1999 : R2015 | Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction |
| ASTM D 6178 : 2014 | Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 6330 : 1998 : R2014 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM E 1620 : 1997 : R2016 | Standard Terminology Relating to Liquid Particles and Atomization |
| ASTM D 6348 : 2012 : EDT 1 | Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ASTM D 7789 : 2012 | Standard Practice for Collection of Fungal Material from Surfaces by Swab |
| ASTM D 8142 : 2017 | Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers |
| ASTM D 7144 : 2005 : REV A : R2016 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
| ASTM D 2010/D2010M : 1998 : R2017 | Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique |
| ASTM D 7145 : 2005 : R2015 | Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means |
| ASTM D 4766 : 1998 : R2014 | Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method) |
| ASTM D 6620 : 2019 | Standard Practice for Asbestos Detection Limit Based on Counts |
| ASTM D 5110 : 1998 : R2017 | Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry |
| ASTM D 5011 : 2017 | Standard Practices for Calibration of Ozone Monitors Using Transfer Standards |
| ASTM D 5116 : 2017 | Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
| ASTM D 7758 : 2017 | Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations |
| ASTM D 6245 : 2018 | Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation |
| ASTM D 7459 : 2008 : R2016 | Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources |
| ASTM D 6061 : 2001 : R2018 : EDT 1 | Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| ASTM D 1357 : 1995 : R2011 | Standard Practice for Planning the Sampling of the Ambient Atmosphere |
| ASTM D 6785 : 2013 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM F 2299/F2299M : 2003 : R2017 | Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres |
| ASTM D 6562 : 2012 | Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace |
| ASTM D 3824 : 2012 | Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method |
| ASTM D 1739 : 1998 : R2017 | Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM D 7143 : 2017 | Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ASTM D 3162 : 2012 | Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry) |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM D 3464 : 1996 : R2014 | Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer |
| ASTM E 1998 : 2011 : R2018 | Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
| ASTM D 6670 : 2018 | Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ASTM D 4532 : 2015 | Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers |
| ASTM D 6209 : 2013 | Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
| ASTM D 5075 : 2001 : R2017 : EDT 1 | Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air |
| ASTM D 6177 : 2014 | Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 6329 : 1998 : R2015 | Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ASTM D 3154 : 2014 | Standard Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ASTM D 6552 : 2006 : R2016 | Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols |
| ASTM D 6420 : 2018 | Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
| ASTM D 5527 : 2000 : R2017 : EDT 1 | Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 6281 : 2015 | Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
| ASTM D 6522 : 2011 | Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers |
| ASTM D 7439 : 2014 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| ASTM D 4185 : 2017 | Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry |
| ASTM D 7200 : 2012 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy (Withdrawn 2021) |
| ASTM D 7339 : 2018 | Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography |
| ASTM E 2148 : 2016 | Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety |
| ASTM D 7659 : 2010 : R2015 | Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection |
| ASTM D 6056 : 1996 : R2011 | Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy (Withdrawn 2020) |
| ASTM D 7036 : 2016 | Standard Practice for Competence of Air Emission Testing Bodies |
| ASTM D 7201 : 2006 : R2011 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy) |
| ASTM D 5836 : 2008 : R2013 | Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
| ASTM D 3687 : 2007 : R2012 | Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| ASTM D 6784 : 2016 | Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) |
| ASTM D 4298 : 2004 : R2014 : EDT 1 | Standard Guide for Intercomparing Permeation Tubes to Establish Traceability |
| ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM D 7614 : 2012 | Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements |
| ASTM D 5111 : 2012 | Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations |
| ASTM E 337 : 2015 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 7948 : 2014 : EDT 1 | Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry |
| ASTM D 4490 : 1996 : R2016 | Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes |
| ASTM D 4430 : 2000 : R2015 | Standard Practice for Determining the Operational Comparability of Meteorological Measurements |
| ASTM E 2267 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022) |
| ASTM D 3796 : 2009 : R2016 | Standard Practice for Calibration of Type S Pitot Tubes |
| ASTM D 5366 : 1996 : R2017 | Standard Test Method for Determining the Dynamic Performance of a Wind Vane |
| ASTM D 5156 : 2002 : R2016 | Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption) |
| ASTM D 7296 : 2018 | Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds |
| ASTM D 5096 : 2002 : R2017 | Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer |
| ASTM D 5835 : 1995 : R2013 | Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations |
| ASTM D 5578 : 2004 : R2015 | Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) (Withdrawn 2024) |
| ASTM D 5197 : 2016 | Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology) |
| ASTM E 800 : 2014 | Standard Guide for Measurement of Gases Present or Generated During Fires |
| ASTM D 3609 : 2000 : R2014 | Standard Practice for Calibration Techniques Using Permeation Tubes |
| ASTM D 7658 : 2017 | Standard Test Method for Direct Microscopy of Fungal Structures from Tape |
| ASTM D 3631 : 1999 : R2017 | Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 8208 : 2019 | Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler |
| ASTM D 5955 : 2002 : R2017 : EDT 1 | Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM (Withdrawn 2022) |
| ASTM D 4600 : 1995 : R2016 | Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres |
| ASTM D 5953M : 2016 | Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection |
| ASTM D 7910 : 2014 | Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift |
| ASTM D 5791 : 1995 : R2017 | Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings |
| ASTM D 6331 : 2016 | Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| ASTM D 7911 : 2014 | Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
| ASTM E 2889 : 2012 : R2017 | Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment |
| ASTM D 7520 : 2016 | Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere |
| ASTM D 7706 : 2017 | Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers |
| ASTM D 7822 : 2018 | Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids |
| ASTM D 7392 : 2007 : R2013 | Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants |
| ASTM D 6363 : 1998 : R2013 | Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.