![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 1587 : 2008 : R2012 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
Hardcopy , PDF
08-01-2024
English
15-05-2012
CONTAINED IN VOL. 04.08, 2015 Defines a procedure for using a thin-walled metal tube to recover relatively undisturbed soil samples suitable for laboratory tests of engineering properties, such as strength, compressibility, permeability, and density.
Committee |
D 18
|
DocumentType |
Standard Practice
|
Pages |
4
|
ProductNote |
Reconfirmed EDT 1
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers a procedure for using a thin-walled metal tube to recover relatively intact soil samples suitable for laboratory tests of engineering properties, such as strength, compressibility, permeability, and density. Thin-walled tubes used in piston, plug, or rotary-type samplers should comply with Section 6.3 of this practice which describes the thin-walled tubes.
1.2This practice is limited to soils that can be penetrated by the thin-walled tube. This sampling method is not recommended for sampling soils containing gravel or larger size soil particles, cemented, or very hard soils. Other soil samplers may be used for sampling these soil types. Such samplers include driven split barrel samplers and soil coring devices (D1586, D3550, and D6151). For information on appropriate use of other soil samplers refer to D6169.
1.3This practice is often used in conjunction with fluid rotary drilling (D1452, D5783) or hollow-stem augers (D6151). Subsurface geotechnical explorations should be reported in accordance with practice (D5434). This practice discusses some aspects of sample preservation after the sampling event. For information on preservation and transportation process of soil samples, consult Practice D4220. This practice does not address environmental sampling; consult D6169 and D6232 for information on sampling for environmental investigations.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4.1The tubing tolerances presented in Table 1 are from sources available in North America. Use of metric equivalent is acceptable as long as thickness and proportions are similar to those required in this standard.
Size Outside | 2 | 50.8 | 3 | 76.2 | 5 | 127 |
Outside diameter, Do | +0.007 | +0.179 | +0.010 | +0.254 | +0.015 | 0.381 |
-0.000 | -0.000 | -0.000 | -0.000 | -0.000 | -0.000 | |
Inside diameter, Di | +0.000 | +0.000 | +0.000 | +0.000 | +0.000 | +0.000 |
-0.007 | -0.179 | -0.010 | -0.254 | -0.015 | -0.381 | |
Wall thickness | ±0.007 | ±0.179 | ±0.010 | ±0.254 | ±0.015 | ±0.381 |
Ovality | 0.015 | 0.381 | 0.020 | 0.508 | 0.030 | 0.762 |
Straightness | 0.030/ft | 2.50/m | 0.030/ft | 2.50/m | 0.030/ft | 2.50/m |
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.6This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.
ASTM D 5434 : 2012 | Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021) |
ASTM D 2166/D2166M : 2016 | Standard Test Method for Unconfined Compressive Strength of Cohesive Soil |
ASTM D 6031/D6031M : 1996 : R2015 | Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes |
ASTM D 2488 : 2017 : EDT 1 | Standard Practice for Description and Identification of Soils (Visual-Manual Procedures) |
ASTM D 5311/D5311M : 2013 | Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022) |
ASTM D 6282/D6282M : 2014 | Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023) |
ASTM D 5092/D5092M : 2016 | Standard Practice for Design and Installation of Groundwater Monitoring Wells |
ASTM D 3550/D3550M : 2017 | Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils |
ASTM D 6035/D6035M : 2013 | Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter |
ASTM D 4767 : 2011 | Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils |
ASTM D 6169/D6169M : 2013 | Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
ASTM D 6528 : 2017 | Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils |
ASTM D 5084 : 2016 : REV A | Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
ASTM D 4186/D4186M : 2012 : EDT 1 | Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading |
ASTM D 6009 : 2012 | Standard Guide for Sampling Waste Piles |
ASTM D 1140 : 2017 | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
ASTM D 6286 : 2012 | Standard Guide for Selection of Drilling Methods for Environmental Site Characterization |
ASTM D 1452/D1452M : 2016 | Standard Practice for Soil Exploration and Sampling by Auger Borings |
ASTM D 4823 : 1995 : R2014 | Standard Guide for Core Sampling Submerged, Unconsolidated Sediments |
ASTM D 7100 : 2011 | Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
ASTM D 2435/D2435M : 2011 | Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading |
ASTM D 6640 : 2001 : R2015 | Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
ASTM D 4511 : 2011 | Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat |
ASTM D 5876/D5876M : 2017 | Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
ASTM D 5918 : 2013 : EDT 1 | Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022) |
ASTM D 6232 : 2016 | Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
ASTM D 2850 : 2015 | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
ASTM D 5195 : 2014 | Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods |
ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
ASTM D 3999/D3999M : 2011 : EDT 1 | Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020) |
ASTM D 3080/D3080M : 2011 | Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020) |
ASTM D 5220 : 2014 | Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method |
ASTM D 2937 : 2017 : EDT 2 | Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method |
ASTM D 4700 : 2015 | Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024) |
ASTM D 4546 : 2014 : EDT 1 | Standard Test Methods for One-Dimensional Swell or Collapse of Soils |
ASTM D 6914/D6914M : 2016 | Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices |
ASTM D 6391 : 2011 | Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration |
ASTM D 6151/D6151M : 2015 | Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024) |
ASTM D 4220/D4220M : 2014 | Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023) |
ASTM D 6519 : 2015 | Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler |
ASTM D 5782 : 2018 | Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices |
ASTM D 8037/D8037M : 2016 | Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils |
ASTM D 4648/D4648M : 2016 | Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated<brk/>Fine-Grained Clayey Soil |
ASTM D 7243 : 2011 | Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges |
ASTM F 1962 : 2011 | Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings (Withdrawn 2020) |
ASTM D 3282 : 2015 | Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
ASTM D 7181 : 2011 | Method for Consolidated Drained Triaxial Compression Test for Soils |
ASTM D 6232 : 2016 : REDLINE | Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
ASTM D 3740 : 2012-06 | PRACTICE FOR MINIMUM REQUIREMENTS FOR AGENCIES ENGAGED IN TESTING AND/OR INSPECTION OF SOIL AND ROCK AS USED IN ENGINEERING DESIGN AND CONSTRUCTION |
ASTM D 6169 : 1998 | Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
ASTM D 653 : 2014 : REDLINE | Standard Terminology Relating to Soil, Rock, and Contained Fluids |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.