Skip to content
Please enter a keyword to search

  • ASTM D 1613 : 2017 : REDLINE

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    Available format(s):  PDF

    Superseded date:  24-02-2017

    Language(s):  English

    Published date:  24-02-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 06.04, 2017 Defines the determination of total acidity as acetic acid, in concentrations below 0.05%, in organic compounds and hydrocarbon mixtures used in paint, varnish, and lacquer solvents and diluents.

    Scope - (Show below) - (Hide below)

    1.1This test method covers the determination of total acidity as acetic acid, in concentrations below 0.05 %, in organic compounds and hydrocarbon mixtures used in paint, varnish, and lacquer solvents and diluents. It is known to be applicable to such mixtures as low molecular weight saturated and unsaturated alcohols, ketones, ethers, esters, hydrocarbon diluents, naphtha, and other light distillate petroleum fractions.

    1.2For purposes of determining conformance of an observed value or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.

    1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

    1.4For specific hazard information and guidance consult supplier’s Safety Data Sheet.

    1.5This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 01
    Development Note Supersedes ASTM UOP 809. (10/2010)
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Superseded
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 4835 : 2008 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
    ASTM D 4837 : 2007 Standard Specification for Propylene Glycol Monomethyl Ether
    BS ISO 4925:2005 Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems
    MIL I 27686 : F INHIBITOR, ICING, FUEL SYSTEM
    ASTM D 3728 : 2008 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)
    CGSB 15.52 : 1992 TECHNICAL GRADE METHYL ETHYL KETONE
    ASTM D 3128 : 2007 : R2013 Standard Specification for 2-Methoxyethanol
    A-A-3007 Base Document:1996 THINNER, FOR PHENOL-FORMALDEHYDE AND MEDIUM OIL AND STYRENATED ALKYD PAINTS AND VARNISHES
    TT-A-511 Revision E:1992 AMYL ACETATE, TECHNICAL
    XP M15 029 : 2006 XP AUTOMOTIVE FUELS - PETROL-SUPERETHANOL - REQUIREMENTS AND TEST METHODS
    ASTM E 202 : 2012-06 TEST METHODS FOR ANALYSIS OF ETHYLENE GLYCOLS AND PROPYLENE GLYCOLS
    ASTM D 330 : 2007 Standard Specification for 2-Butoxyethanol
    ASTM D 3329 : 2003 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
    ASTM D 2916 : 2009 Standard Specification for Isophorone
    ASTM D 4252 : 1989 : R2017 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
    ASTM D 329 : 2007 : R2013 Standard Specification for Acetone
    ASTM D 2634 : 2007 : R2013 Standard Specification for Methyl Amyl Acetate (95 % Grade)
    ASTM D 2635 : 2007 : R2012 Standard Specification for Methyl Isobutyl Carbinol (Withdrawn 2021)
    ASTM D 5137 : 2007 : R2013 Standard Specification for Hexyl Acetate
    ASTM D 2636 : 2007 : R2012 Standard Specification for Hexylene Glycol (Withdrawn 2021)
    ASTM D 3893 : 2003 : R2009 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
    ASTM D 3362 : 2005 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011)
    ASTM D 2636 : 2007 Standard Specification for Hexylene Glycol
    ASTM D 2917 : 2007 : R2013 Standard Specification for Methyl Isoamyl Ketone
    ASTM D 4773 : 2002 : R2007 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
    ASTM D 3131 : 2007 : R2013 Standard Specification for Isopropyl Acetate (99 % Grade)
    ASTM D 4709 : 2007 : R2012 Standard Specification for Methyl Acrylate (Withdrawn 2021)
    CEN/TR 15993:2018 Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
    P-W-2891 Revision A:2002 WIPE SOLVENTS, EXEMPT AND NON-EXEMPT
    ISO 4925:2005 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
    MIL-DTL-27686 Revision G:1997 INHIBITOR, ICING, FUEL SYSTEM
    SAE AMS 3166 : 2014 SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS
    ASTM D 319 : 2004 Standard Specification for Amyl Alcohol (Synthetic) (Withdrawn 2010)
    ASTM D 4252 : 1989 : R1995 : EDT 1 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
    O-A-51 Revision H:1992 ACETONE, TECHNICAL
    ASTM D 2916 : 2009 : R2017 Standard Specification for Isophorone
    CGSB-1.110 : M1991 CORR 1991 GENERAL PURPOSE THINNER FOR LACQUERS
    TT-E-781 Revision D:1992 ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL
    ASTM D 3545 : 2006 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
    SAE J 1704 : 2016 MOTOR VEHICLE BRAKE FLUID BASED UPON GLYCOLS, GLYCOL ETHERS AND THE CORRESPONDING BORATES
    ASTM D 1258 : 2005 Standard Test Methods for High-Gravity Glycerin (Withdrawn 2011)
    ASTM D 4836 : 2009 Standard Specification for Dipropylene Glycol Monomethyl Ether
    ASTM D 2635 : 2007 Standard Specification for Methyl Isobutyl Carbinol
    ASTM D 4709 : 2007 Standard Specification for Methyl Acrylate
    ASTM D 2804 : 2002 : R2012 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography (Withdrawn 2021)
    ASTM D 3329 : 2003 : R2017 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
    ASTM D 268 : 2001 : R2007 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
    ASTM D 3585 : 2008 Standard Specification for ASTM Reference Fluid for Coolant Tests
    ASTM D 3893 : 2003 : R2017 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
    ASTM D 3585 : 2008 : R2013 Standard Specification for ASTM Reference Fluid for Coolant Tests
    ASTM D 3548 : 2009 : R2017 Standard Specification for Ethyl Acrylate
    ASTM D 1718 : 2009 : R2017 Standard Specification for Isobutyl Acetate (95 % Grade)
    ASTM D 268 : 2001 : R2012 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021)
    ASTM D 608 : 2005 : R2019 Standard Specification for Dibutyl Phthalate
    ASTM D 2627 : 2008 : R2012 Standard Specification for Diacetone Alcohol (Withdrawn 2021)
    ASTM D 345 : 2002 Side bearings of the freight wagon bogies. General specifications
    CGSB 1.136 : 1992 ANTIBLUSH THINNER FOR CELLULOSE NITRATE LACQUER
    ASTM E 1145 : 1987 : R1992 : EDT 1 Specification for Denatured Ethyl Alcohol, Formula 3A (Withdrawn 1993)
    MIL I 85470 : A INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH
    09/30199323 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS
    ASTM D 608 : 2005 : R2011 Standard Specification for Dibutyl Phthalate
    03/106442 DC : DRAFT APR 2003 ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS
    MIL-PRF-32295 Revision B:2017 CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE
    ASTM D 5008 : 2007 : R2012 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography (Withdrawn 2021)
    MIL-PRF-32597 Base Document:2018 CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
    ASTM D 4773 : 2002 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
    ASTM D 4835 : 2008 Standard Specification for Propylene Glycol Monomethyl Ether Acetate
    S.R. CEN/TR 15993:2018 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
    CGSB 1.164 : 1999 SOLVENT FOR VINYL PRETREATMENT COATING
    ASTM D 3131 :2007 Standard Specification for Isopropyl Acetate (99 % Grade)
    ASTM D 2627 : 2008 Standard Specification for Diacetone Alcohol
    ASTM D 2804 : 2002 : R2007 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
    PD CEN/TR 15993:2013 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
    ASTM D 4615 : 2012 : REDLINE Standard Specification for n-Butyl Acetate (All Grades)
    ASTM D 3541 : 2005 Standard Specification for 2-Ethylhexyl Acrylate
    DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
    CGSB 15.50 : 1992 TECHNICAL GRADE ACETONE
    MIL-DTL-83800 Revision B:2009 Propanediol, 1, 2-
    ASTM D 2634 : 2007 Standard Specification for Methyl Amyl Acetate (95 % Grade)
    ASTM D 3540 : 2012 : REDLINE Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)
    SAE J 1703 : 2016 MOTOR VEHICLE BRAKE FLUID
    ASTM D 2917 : 2007 Standard Specification for Methyl Isoamyl Ketone
    ASTM D 3547 : 2005 Standard Specification for n-Butyl Acrylate (Withdrawn 2011)
    ASTM D 329 : 2007 Standard Specification for Acetone
    ASTM D 329 : 2007 : EDT 1 Standard Specification for Acetone
    ASTM D 608 : 2005 Standard Specification for Dibutyl Phthalate
    ASTM D 5137 :2007 Standard Specification for Hexyl Acetate
    ASTM D 5008 : 2007 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
    ASTM D 3548 : 2009 Standard Specification for Ethyl Acrylate
    ASTM D 330 : 2007 : R2013 Standard Specification for 2-Butoxyethanol
    ASTM D 3728 : 2008 : R2012 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021)
    ASTM D 4252 : 1989 : R2003 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
    ASTM D 4252 : 1989 : R2009 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
    GOST 849:2018 Primary nickel. SpecificationsE
    ASTM D 4773 : 2002 : R2012 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021)
    MIL-D-218 Revision B:1981 DIBUTYL PHTHALATE, TECHNICAL (METRIC)
    MIL-E-51454 Revision A:1994 ETHYL ALCOHOL (ETHANOL)
    ASTM D 3329 : 2003 : R2009 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
    MIL-E-7125 Revision A:1982 ETHYLENE GLYCOL MONOETHYL ETHER ACETATE, TECHNICAL
    O-E-760 Revision D:1987 ETHYL ALCOHOL (ETHANOL), DENATURED ALCOHOL, PROPRIETARY SOLVENTS & SPECIAL INDUSTRIAL SOLVENTS
    ASTM D 1153 : 2012 : REDLINE Standard Specification for Methyl Isobutyl Ketone
    ASTM D 4837 : 2007 : R2012 Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021)
    ASTM F 65 : 1968 : R1983 Specification for Primary Amyl Acetate (Mixed Isomers) for Use in Fabricating Electron Devices (Withdrawn 1989)
    ASTM D 363 : 1990 : R2000 Standard Specification for Tricresyl Phosphate (Withdrawn 2005)
    SAE AMS 3167 : 2005 SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
    ASTM D 2804 : 2002 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
    ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
    ASTM D 3893 : 2003 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
    ASTM E 1177 : 2014 : REDLINE Standard Specification for Engine Coolant Grade Glycol
    ASTM D 3128 :2007 Standard Specification for 2-Methoxyethanol
    ASTM D 268 : 2001 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
    ASTM D 4836 : 2009 : R2017 Standard Specification for Dipropylene Glycol Monomethyl Ether
    ASTM D 3545 : 2006 : R2012 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography (Withdrawn 2021)
    ASTM D 1718 : 2009 Standard Specification for Isobutyl Acetate (95% Grade)
    I.S. CWA 15293:2005 AUTOMOTIVE FUELS - ETHANOL E85 - REQUIREMENTS AND TEST METHODS

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 7795 : 2015 : REDLINE Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
    ASTM E 200 : 2016 : REDLINE Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective