Skip to content
Please enter a keyword to search

  • ASTM D 1621 : 2016 : REDLINE

    Current The latest, up-to-date edition.

    Standard Test Method for Compressive Properties of Rigid Cellular Plastics

    Available format(s):  PDF

    Language(s):  English

    Published date:  17-05-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 08.01, 2016 Specifies a procedure for determining the compressive properties of rigid cellular materials, particularly expanded plastics.

    Scope - (Show below) - (Hide below)

    1.1This test method describes a procedure for determining the compressive properties of rigid cellular materials, particularly expanded plastics.

    1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    Note 1:This test method and ISO 844 are technically equivalent.

    General Product Information - (Show below) - (Hide below)

    Committee D 20
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASCE 45 05 : 2006 Standard Guidelines for the Design (45-05), Installation (46-05), and Operation and Maintenance (47-05) of Urban Stormwater Systems
    MIL P 24249 : A PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, POUR-IN-PLACE, LARGE SCALE AND INSTALLATION OF
    MIL F 83671 : A FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR
    HH-I-1972-5 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE BOARD ON BOTH SIDES OF THE FOAM
    ACI 360R : 2010 GUIDE TO DESIGN OF SLABS-ON-GROUND
    MIL P 26514 : F POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING
    HH-I-1972 Base Document:1981 INSULATION BOARD, THERMAL, FACED, POLYURETHANE OR POLYISOCYANURATE
    ASTM F 1839 : 2008 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
    CSA Z245.30 : 2014 FIELD-APPLIED EXTERNAL COATINGS FOR STEEL PIPELINE SYSTEMS
    I.S. EN ISO 13590:2004 SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS
    ASTM F 755 : 1999 : EDT 1 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
    ASCE/EWRI 12-13, 13-13, 14-13 : 2013 STANDARD GUIDELINES FOR THE DESIGN, INSTALLATION, AND OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE
    ASTM C 447 : 2015 : REDLINE Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
    ASTM D 7361 : 2007 : R2012 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
    ASTM C 1512 : 2010 : R2015 : EDT 1 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
    ASTM E 1974 : 2011 : REDLINE SPECIFICATION FOR SHELTER, ELECTRICAL EQUIPMENT S-250/G
    ASTM D 7425 : 2008 Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
    ASTM D 7425/D7425M : 2013 : REDLINE Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
    ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44
    MIL-C-10933 Revision E:1985 CHILLED WATER UNITS, BAKERY
    MIL-P-46847 Revision B:1984 PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS
    MIL-PRF-46194 Revision A:1997 FOAM, RIGID, STRUCTURAL, CLOSED CELL
    HH-I-1972-3 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE INSULATION BOARD ON ONE SIDE AND ASPHALT/ORGANIC FELT OR ASPHALT/GLASS FIBER FELT ON THE OTHER SIDE OF THE FOAM
    HH-I-1972-1 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE, FACED WITH ALUMINUM FOIL ON BOTH SIDES OF THE FOAM
    BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
    MIL-B-36970 Revision A:1991 BOX, BLOOD PRODUCTS SHIPPING
    ASTM C 1512 : 2010 : R2015 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
    MIL-P-21929 Revision C:1991 PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID 2 AND 4 POUNDS PER CUBIC FOOT
    ASTM F 755 : 1999 : R2005 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
    MIL-PRF-83671 Revision B:1997 FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR
    ASCE 47 05 : 2006 GUIDELINES FOR THE OPERATION AND MAINTENANCE OF URBAN STORMWATER SYSTEMS
    ACI 301 : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
    SAE AMS 3572 : 2016 RESIN POLYURETHANE, FOAM-IN-PLACE, RIGID
    ASTM F 2150 : 2013 : REDLINE Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
    ASTM F 1839 : 2008 : EDT 1 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
    ASTM F 1839 : 2008 : EDT 2 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
    ASTM F 2759 : 2011 : REDLINE Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
    ASTM D 5469 : 2000 : R2005 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
    ASTM D 7361 : 2007 : R2018 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
    ASTM F 561 : 2013 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
    NASA MSFC PROC 3687 : 2015 MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE
    HH-I-1972-2 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH ASPHALT/ORGANIC FELT, ASPHALT/ASBESTOS FELT OR ASPHALT/GLASS FIBER FELT ON BOTH SIDES OF THE FOAM
    BS EN ISO 13590:2003 Small craft. Personal watercraft. Construction and system installation requirements
    HH-I-1972-4 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH GYPSUM BOARD ON SIDE AND ALUMINUM FOIL OR ASPHALT/ORGANIC FELT ON THE OTHER SIDE OF THE FOAM
    MIL I 24172 : A INSULATION, PLASTIC, CELLULAR POLYURETHANE, RIGID, PREFORMED AND FOAM IN PLACE
    CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
    SAE J 2621 : 2011 QUALIFYING AFTERMARKET TWO-COMPONENT STRUCTURAL FOAMS
    NASA MSFC SPEC 2083 : 2007 MULTIPROGRAM/PROJECT COMMON USE DOCUMENT FOAM, POLYURETHANE
    ASTM D 2341 : 1981 Specification for Rigid Urethane Foam (Withdrawn 1988)
    MIL-W-70948 Base Document:1991 WARHEAD SECTION, GM, PRACTICE XM276 LOADING, ASSEMBLING AND PACKING
    MIL-PRF-24172 Revision B:2004 Insulation, Plastic, Cellular Foam, Rigid, Preformed and Foam-in-Place
    ASTM D 5469 : 2000 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
    ASCE 14 05 : 2006 GUIDELINES FOR THE OPERATION AND MAINTENANCE OF URBAN SUBSURFACE DRAINAGE
    MIL-F-47222 Base Document:1974 FOAM, POLYURETHANE, RIGID
    ASTM F 1839 : 2008 : R2012 : EDT 1 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
    SAE AMS PRF 46194 : 2016 FOAM, RIGID, STRUCTURAL, CLOSED CELL
    ASCE 12 05 : 2006 GUIDELINES FOR THE DESIGN OF URBAN SUBSURFACE DRAINAGE
    ACI 301M : 2016 SPECIFICATIONS FOR STRUCTURAL CONCRETE
    ACI 223 : 1998 PRACTICE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE
    ACI 223R : 2010 GUIDE FOR THE USE OF SHRINKAGE-COMPENSATING CONCRETE
    ASCE 13 05 : 2006 GUIDELINES FOR THE INSTALLATION OF URBAN SUBSURFACE DRAINAGE
    ASTM C 1029 : 2015 : REDLINE Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
    ASTM D 7361 : 2007 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
    ASTM D 6817/D6817M : 2017 : REDLINE Standard Specification for Rigid Cellular Polystyrene Geofoam
    ASTM C 1594 : 2011 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
    ASTM F 1839 : 2008 : R2016 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
    ASTM F 755:1999 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
    ASTM E 1730 : 2015 : REDLINE SPECIFICATION FOR RIGID FOAM FOR USE IN STRUCTURAL SANDWICH PANEL CORES
    ASTM F 2883 : 2011 Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020)
    ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 IRC® Code and Commentary, Volume 2
    ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
    NASA MSFC SPEC 3686 : A2015 MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE
    MIL-I-50412 Base Document:1970 INITIATOR ASSEMBLY FOR PRIMER, ELECTRIC, XM91E1 AND XM117, PARTS FOR
    CSA A123.21 : 2014 STANDARD TEST METHOD FOR THE DYNAMIC WIND UPLIFT RESISTANCE OF MEMBRANE-ROOFING SYSTEMS
    HH-I-1972-6 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH MINERAL FIBERBOARD ON ONE SIDE OF THE FOAM AND GLASS MAT ON THE OTHER SIDE OF THE FOAM
    MIL-F-81254 Base Document:1965 FOAM, URETHANE
    13/30242622 DC : 0 BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
    ASTM F 1839 : 2008 : R2012 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
    API 17U : 2015 RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT
    ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
    ASTM D 6388 : 1999 : R2012 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
    ASTM C 1594 : 2011 : R2017 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
    EN ISO 13590:2003/AC:2004 SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS
    ASTM C 1512 : 2010 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
    ASTM C 1696 : 2016 : REDLINE Standard Guide for Industrial Thermal Insulation Systems
    MIL-S-0055541 Revision H:1991 SHELTER, ELECTRICAL EQUIPMENT S-250()/G
    MIL-P-47099 Revision A:1989 POLYURETHANE FOAM, POLYETHER TYPE, RIGID, FOR PACKAGING AND ENCAPSULATION OF ELECTRONIC COMPONENTS
    MIL-S-24167 Revision A:1972 SYNTACTIC MATERIAL, RIGID, POUR-IN-PLACE, STRUCTURAL VOID FILLING
    AASHTO M 230 : 2007 SPECIFICATION FOR EXPANDED AND EXTRUDED FOAM BOARD (POLYSTYRENE)
    MIL-DTL-24688 Revision A:2011 INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM
    MIL-P-40619 Revision B:1991 PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS)
    ASTM C 1013 : 1994 Specification for Faced Rigid Cellular Polyisocyanurate Roof Insulation (Withdrawn 1997)
    NF EN ISO 13590 : 2004 SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS
    ASTM D 7119 : 2007 Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
    ASTM E 1420 : 1991 Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
    ASTM F 755 : 1999 : R2011 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
    ASTM D 6388 : 1999 : R2005 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
    ASTM D 6388:1999 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
    DIN EN ISO 13590:2004-11 SMALL CRAFT - PERSONAL WATERCRAFT - CONSTRUCTION AND SYSTEM INSTALLATION REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
    ASTM E 83 : 2016 : REDLINE Standard Practice for Verification and Classification of Extensometer Systems
    ISO 844:2014 Rigid cellular plastics Determination of compression properties
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective