ASTM D 1675 : 2018
Current
The latest, up-to-date edition.
Standard Test Methods for Polytetrafluoroethylene Tubing
Hardcopy , PDF
English
01-05-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 09
|
| DocumentType |
Test Method
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1These test methods cover procedures for testing polytetrafluoroethylene tubing for use as electrical insulation. The procedures appear in the following sections:
| | | ASTM |
| Conditioning | 7 | ... |
| Dielectric Breakdown Voltage | 28 – 30 | D149, D876 |
| Inside Diameter | 8 – 13 | D876 |
| Mandrel Bend Test | 46 – 52 | D149, D876 |
| Melting Point | 41 – 45 | D3418, D4895 |
| Penetration Test | 26 and 27 | D876 |
| Specific Gravity | 36 – 40 | D792, D1505 |
| Strain Relief | 31 – 35 | ... |
| Volatile Loss | 20 – 25 | ... |
| Wall Thickness | 14 – 19 | ... |
Note 1:These test methods are similar but not identical to those in IEC 60684–2.
1.2The values stated in inch-pound units are the standard except for temperature, which is stated in degrees Celsius. Values in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Section 5.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 6867 : 2003 : R2014 | Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing |
| ASTM D 3296 : 2014 : REV A : R2019 | Standard Specification for FEP-Fluorocarbon Tube |
| ASTM D 3295 : 2015 | Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing |
| ASTM D 3418 : 1982 : R1988 : EDT 1 | Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis |
| ASTM D 3418 : 2021 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| ASTM D 3487 : 2016 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
| ASTM D 1711 : 2011 | Standard Terminology Relating to Electrical Insulation |
| ASTM E 176 : 2021 : REV A : EDT 1 | Standard Terminology of Fire Standards |
| ASTM E 176 : 2018 : REV A : EDT 1 | Standard Terminology of Fire Standards |
| ASTM D 1711 : 2024 : REV A | Standard Terminology Relating to Electrical Insulation |
| ASTM D 4895 : 1998 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
| ASTM E 176 : 2024 | Standard Terminology of Fire Standards |
| ASTM D 3418 : 2015 | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| ASTM D 4895 : 2018 : R2023 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
| ASTM D 1711 : 1999 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 876 : 2021 | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| ASTM E 176 : 2021 | Standard Terminology of Fire Standards |
| ASTM D 4895 : 2018 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
| ASTM D 1711 : 2014 : REV A | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1505 : 1968 : R1979 | Standard Test Method for Density Of Plastics By The Density-Gradient Technique |
| ASTM E 176 : 2018 : REV A : EDT 2 | Standard Terminology of Fire Standards |
| ASTM D 3487 : 2024 | Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus |
| ASTM D 1711 : 2015 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 876 : 2013 | Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
| ASTM D 1711 : 2024 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 1711 : 2022 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 3487 : 1988 : R1993 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
| ASTM D 3487 : 2016 : EDT 1 | Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus |
| ASTM D 1711 : 2020 | Standard Terminology Relating to Electrical Insulation |
| ASTM D 4895 : 2016 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
| ASTM E 176 : 2021 : REV A | Standard Terminology of Fire Standards |
| ASTM D 4895 : 2015 | Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.