ASTM D 198 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods of Static Tests of Lumber in Structural Sizes
Available format(s)
Hardcopy , PDF
Superseded date
13-08-2021
Superseded by
Language(s)
English
Published date
14-12-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 07
|
| DocumentType |
Test Method
|
| Pages |
28
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods cover the evaluation of lumber and wood-based products in structural sizes by various testing procedures.
1.2The test methods appear in the following order:
| Sections | |
| Flexure | 4 – 11 |
| Compression (Short Specimen) | 13 – 20 |
| Compression (Long Specimen) | 21 – 28 |
| Tension | 29 – 36 |
| Torsion | 37 – 44 |
| Shear Modulus | 45 – 52 |
1.3Notations and symbols relating to the various testing procedures are given in Appendix X1.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 6570 : 2018 : REV A | Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber |
| ASTM D 7469 : 2016 | Standard Test Methods for End-Joints in Structural Wood Products |
| ASTM D 7032 : 2017 | Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
| ASTM D 6815 : 2009 : R2015 | Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products |
| ASTM D 5055 : 2019 : EDT 1 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D 1990 : 2019 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens |
| ASTM D 1036 : 1999 : R2017 | Standard Test Methods of Static Tests of Wood Poles |
| ASTM D 7857 : 2016 | Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures |
| ASTM E 2954 : 2015 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
| ASTM D 6874 : 2021 | Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation |
| ASTM D 7341 : 2021 | Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing |
| ASTM D 7199 : 2020 | Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models |
| ASTM D 7672 : 2019 | Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies |
| ASTM D 5457 : 2021 : REV A | Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 4945 : 2017 | Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
| ASTM D 5456 : 2021 : EDT 1 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 7381 : 2007 : R2013 | Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material |
| ASTM D 1165 : 1980 : R1994 : EDT 1 | Standard Nonmenclature of Domestic Hardwoods and Softwoods (Withdrawn 2002) |
| ASTM D 1165 : 2007 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
| ASTM D 3737 : 2008 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 9 : 2020 | Standard Terminology Relating to Wood and Wood-Based Products |
| ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 4761 : 2013 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 4442 : 2007 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM E 83 : 2000 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
| ASTM D 3737 : 2001 : REV B | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 2915 : 2017 | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 3737 : 2012 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2018 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 7438 : 2020 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2015 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 4761 : 2002 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM E 691 : 2020 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 4761 : 2011 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 3737 : 2009 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 4761 : 2018 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM E 691 : 2019 : EDT 1 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 4442 : 2016 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 2395 : 1993 : R1997 : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 1165 : 2018 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
| ASTM D 7438 : 2013 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 2395 : 2007 : REV A | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 4761 : 2019 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials |
| ASTM D 2395 : 2017 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 2915 : 2003 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 4761 : 2005 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM E 691 : 2009 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ASTM D 7438 : 2008 | Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters |
| ASTM D 4442 : 2020 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D 3737 : 2009 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3737 : 2018 : EDT 1 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2002 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2007 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 2395 : 2014 : EDT 1 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 2395 : 2014 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D 2395 : 2006 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 3737 : 2006 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM E 2309 : 2005 | Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines |
| ASTM D 3737 : 2003 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
| ASTM D 3737 : 2000 : REV A | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 3737 : 2004 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
| ASTM D 2395 : 2007 : REV A : EDT 1 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 1165 : 2003 | Standard Nonmenclature of Domestic Hardwoods and Softwoods |
| ASTM D 1165 : 2013 | Standard Nomenclature of Commercial Hardwoods and Softwoods |
| ASTM D 4761 : 2002 : REV A | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 2915 : 2010 | Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
| ASTM D 2915 : 1998 : EDT 1 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 2915 : 2002 | Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber |
| ASTM D 2395 : 2002 | Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials |
| ASTM D 4442 : 1992 : R1997 : EDT 1 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4442 : 1984 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 4442 : 1992 : R2003 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials |
| ASTM D 3737 : 2005 | Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.