ASTM D 1621 : 2016
|
Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
ASTM D 635 : 2018
|
Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
ASTM G 200 : 2020
|
Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil |
ASTM D 3801 : 2020 : REV A
|
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
ASTM C 832 : 2000 : R2021
|
Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load |
ASTM F 756 : 2017
|
Standard Practice for Assessment of Hemolytic Properties of Materials |
ASTM E 2283 : 2008 : R2019
|
Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features |
ASTM G 176 : 2003 : R2017
|
Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method |
ASTM D 5556 : 2019
|
Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fatliquors and Softening Compounds |
ASTM E 1601 : 2019
|
Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
ASTM F 1868 : 2017
|
Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate |
ASTM D 4797 : 2017
|
Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking |
ASTM D 2565 : 2016
|
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
ASTM F 1884 : 2004 : R2018
|
Standard Test Methods for Determining Residual Solvents in Packaging Materials |
ASTM D 8207 : 2018
|
Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry |
ASTM F 1304 : 2018
|
Standard Test Method for Deflection of Resilient Floor Tile |
ASTM D 5083 : 2017
|
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens |
ASTM D 6113 : 2016
|
Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
ASTM D 7520 : 2016
|
Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere |
ASTM F 2845 : 2014
|
Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs |
ASTM D 7000 : 2019 : REV A
|
Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples |
ASTM D 7559/D7559M : 2009 : R2020
|
Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions |
ASTM D 5885/D5885M : 2020
|
Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
ASTM D 7280 : 2020
|
Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration |
ASTM D 7291/D7291M : 2015
|
Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
ASTM C 225 : 1985 : R2014
|
Standard Test Methods for Resistance of Glass Containers to Chemical Attack |
ASTM D 1746 : 2015
|
Standard Test Method for Transparency of Plastic Sheeting |
ASTM C 876 : 2015
|
Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete |
ASTM E 1623 : 2016
|
Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
ASTM E 3098 : 2017
|
Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys |
ASTM D 4355/D4355M : 2021
|
Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus |
ASTM D 7918 : 2017 : REV A
|
Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation |
ASTM E 2301 : 2012 : R2017
|
Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry |
ASTM E 1695 : 2020
|
Standard Test Method for Measurement of Computed Tomography (CT) System Performance |
ASTM E 2187 : 2020 : REV A
|
Standard Test Method for Measuring the Ignition Strength of Cigarettes |
ASTM D 1790 : 2021
|
Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact |
ASTM E 537 : 2020
|
Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry |
ASTM D 3768 : 2016
|
Standard Test Method for Microcellular Urethanes—Flexural Recovery |
ASTM D 6042 : 2009 : R2016
|
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
ASTM C 1182 : 2009(R2019)
|
Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation |
ASTM A 1038 : 2019
|
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
ASTM E 3097 : 2017
|
Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys |
ASTM D 1214 : 2010 : R2020
|
Standard Test Method for Sieve Analysis of Glass Spheres |
ASTM D 1693 : 2015 : EDT 1
|
Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics |
ASTM D 6195 : 2003 : R2019
|
Standard Test Methods for Loop Tack |
ASTM D 4812 : 2019
|
Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
ASTM E 2551 : 2020
|
Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers |
ASTM B 939 : 2015
|
Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials |
ASTM F 609 : 2005 : R2013
|
Standard Test Method for Using a Horizontal Pull Slipmeter (HPS) (Withdrawn 2022) |
ASTM D 8019 : 2015
|
Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets |
ASTM C 1549 : 2016
|
Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer |
ASTM F 3287 : 2017 : EDT 1
|
Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method |
ASTM E 535 : 2019
|
Standard Practice for Preparation of Fire-Test-Response Standards |
ASTM D 5357 : 2019
|
Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction |
ASTM E 646 : 2016
|
Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials |
ASTM C 1891 : 2020
|
Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325) |
ASTM D 8040 : 2018
|
Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware |
ASTM D 6493 : 2011 : R2015
|
Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus |
ASTM D 4440 : 2015
|
Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology |
ASTM D 7911 : 2019
|
Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
ASTM E 2823 : 2017
|
Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based) |
ASTM D 7744/D7744M : 2020
|
Standard Test Methods for Tensile Testing of High Performance Polyethylene Films |
ASTM D 5178 : 2016
|
Standard Test Method for Mar Resistance of Organic Coatings |
ASTM E 2269 : 2014
|
Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography |
ASTM E 3160 : 2018
|
Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles |
ASTM D 7304 : 2016
|
Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC |
ASTM D 2134 : 2019
|
Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
ASTM C 749 : 2015 : R2020
|
Standard Test Method for Tensile Stress-Strain of Carbon and Graphite |
ASTM F 1307 : 2020
|
Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor |
ASTM D 4674 : 2019
|
Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments |
ASTM C 1445 : 2013 : R2018
|
Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table |
ASTM C 67/C67M : 2020
|
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
ASTM G 174 : 2004 : R2017
|
Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact |
ASTM D 4383 : 2018
|
Standard Specification for Plowable, Raised Retroreflective Pavement Markers |
ASTM D 6037 : 2018
|
Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings |
ASTM D 4020 : 2018
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials |
ASTM D 6576 : 2020
|
Standard Specification for Flexible Cellular Rubber Chemically Blown |
ASTM D 7284 : 2020
|
Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
ASTM D 2197 : 2016
|
Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
ASTM F 1446 : 2020
|
Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear |
ASTM D 6038 : 2021
|
Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point) |
ASTM C 1773 : 2017
|
Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature |
ASTM C 1446 : 2019
|
Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories |
ASTM E 2832 : 2012 : R2017
|
Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2) |
ASTM D 2638 : 2021
|
Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer |
ASTM D 5824 : 1998 : R2017
|
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
ASTM D 5628 : 2018
|
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass) |
ASTM B 648 : 2010 : R2015 : EDT 1
|
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor |
ASTM E 1834 : 2018
|
Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
ASTM E 991 : 2016
|
Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
ASTM F 2607 : 2008 : R2014
|
Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
ASTM C 1559 : 2015
|
Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type) |
ASTM F 2828 : 2020
|
Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System |
ASTM D 5158 : 1998 : R2019
|
Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air-Jet Sieving |
ASTM F 1334 : 2018
|
Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners |
ASTM D 6886 : 2018
|
Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography |
ASTM D 1004 : 2021
|
Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
ASTM E 1868 : 2010 : R2015
|
Standard Test Methods for Loss-On-Drying by Thermogravimetry |
ASTM F 2004 : 2017
|
Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis |
ASTM C 1279 : 2013 : R2019
|
Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
ASTM D 3574 : 2017
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM D 7967 : 2016
|
Standard Test Method for Analysis of Chrome Content (as Cr2O3) in Wet Blue using Atomic Absorption |
ASTM E 2603 : 2015
|
Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters |
ASTM F 1914 : 2018
|
Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering |
ASTM D 5504 : 2020
|
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
ASTM D 8087 : 2018
|
Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry |
ASTM C 1134 : 2017
|
Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion |
ASTM F 1978 : 2018
|
Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser |
ASTM D 4567 : 2019
|
Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method |
ASTM D 7305 : 2008 : REV A : R2020
|
Standard Test Method for Reflection Density of Printed Matter |
ASTM D 7234 : 2019
|
Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers |
ASTM D 953 : 2019
|
Standard Test Method for Pin-Bearing Strength of Plastics |
ASTM F 970 : 2017
|
Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading |
ASTM D 7148 : 2019 : REV A
|
Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System |
ASTM C 1733 : 2020
|
Standard Test Method for Distribution Coefficients of Inorganic Species by Batch Method |
ASTM C 307 : 2018
|
Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings |
ASTM D 4204 : 2016
|
Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study |
ASTM E 3047 : 2016
|
Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry |
ASTM F 1802 : 2015
|
Standard Test Method for Performance Testing of Excess Flow Valves |
ASTM D 4512 : 2003 : R2018 : EDT 1
|
Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder |
ASTM F 1165 : 2020
|
Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts |
ASTM E 2335 : 2017
|
Standard Guide for Laboratory Monitors |
ASTM F 2299/F2299M : 2003 : R2017
|
Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres |
ASTM D 1425/D1425M : 2014 : R2020
|
Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment |
ASTM D 4493 : 2020
|
Standard Test Method for Solidification Point of Bisphenol A(4,4′-Isopropylidenediphenol) |
ASTM F 1291 : 2016
|
Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
ASTM C 473 : 2019
|
Standard Test Methods for Physical Testing of Gypsum Panel Products |
ASTM G 69 : 2020
|
Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys |
ASTM E 1165 : 2020
|
Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
ASTM D 4058 : 1996 : R2020
|
Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers |
ASTM D 2063/D2063M : 2010 : R2018
|
Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment |
ASTM G 192 : 2008 : R2020 : EDT 1
|
Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique |
ASTM D 1686 : 2019
|
Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale) |
ASTM D 6631 : 2005 : R2019
|
Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method |
ASTM D 6110 : 2018
|
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics |
ASTM B 311 : 2017
|
Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity |
ASTM F 152 : 1995 : R2017
|
Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
ASTM G 48 : 2011 : R2020 : EDT 1
|
Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution |
ASTM E 1323 : 2015 : R2020
|
Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM D 6132 : 2013 : R2017
|
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
ASTM D 1998 : 2015
|
Standard Specification for Polyethylene Upright Storage Tanks |
ASTM G 5 : 2014 : EDT 1
|
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements |
ASTM D 4222 : 2020
|
Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements |
ASTM D 5757 : 2011 : R2017
|
Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets |
ASTM E 1858 : 2008 : R2015 : EDT 1
|
Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry |
ASTM C 24 : 2009 : R2018
|
Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials |
ASTM E 1362 : 2015 : R2019
|
Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells |
ASTM D 7998 : 2019
|
Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading |
ASTM F 2476 : 2020
|
Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using an Infrared Detector |
ASTM D 7591 : 2012 : R2017
|
Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography |
ASTM F 3004 : 2013 : R2020
|
Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound |
ASTM C 651 : 2020
|
Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature |
ASTM D 6566 : 2018
|
Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats |
ASTM D 1316 : 2020
|
Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer |
ASTM F 608 : 2018
|
Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners |
ASTM D 3763 : 2018
|
Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
ASTM D 8289 : 2020
|
Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite |
ASTM D 2121 : 2016
|
Standard Test Methods for Polymer Content of Styrene Monomer |
ASTM F 2203 : 2013 : R2018
|
Standard Test Method for Linear Measurement Using Precision Steel Rule |
ASTM E 2480 : 2012 : R2017
|
Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands |
ASTM C 704/C704M : 2015 : EDT 1
|
Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature |
ASTM F 3300 : 2018
|
Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus |
ASTM D 7514 : 2014
|
Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment |
ASTM D 7940 : 2014
|
Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy |
ASTM D 6722 : 2019
|
Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis |
ASTM E 948 : 2016 : R2020
|
Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight |
ASTM D 6272 : 2017 : EDT 1
|
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
ASTM D 6900 : 2010 : R2020
|
Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate |
ASTM D 7057 : 2018
|
Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard) |
ASTM E 2864 : 2018
|
Standard Test Method for Measurement of Airborne Metal Oxide Nanoparticle Surface Area Concentration in Inhalation Exposure Chambers using Krypton Gas Adsorption |
ASTM D 7127 : 2017
|
Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument (Withdrawn 2021) |
ASTM D 3985 : 2017
|
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor |
ASTM F 558 : 2021
|
Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners |
ASTM C 1674 : 2016
|
Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures |
ASTM D 5748 : 1995 : R2019
|
Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film |
ASTM D 7330 : 2015
|
Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales |
ASTM D 5135 : 2021
|
Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography |
ASTM D 7897 : 2018
|
Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance |
ASTM D 4533/D4533M : 2015
|
Standard Test Method for Trapezoid Tearing Strength of Geotextiles |
ASTM D 1921 : 2018
|
Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials |
ASTM E 194 : 2020
|
Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders |
ASTM E 1367 : 2003 : R2014
|
Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates |
ASTM F 820 : 2021
|
Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems |
ASTM D 4273 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols |
ASTM F 2977 : 2020
|
Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants |
ASTM F 2894 : 2019
|
Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven |
ASTM D 4417 : 2021
|
Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel |
ASTM F 387 : 2017
|
Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer |
ASTM C 413 : 2018
|
Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
ASTM D 5458 : 1995 : R2020
|
Standard Test Method for Peel Cling of Stretch Wrap Film |
ASTM F 137 : 2008 : R2018
|
Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus |
ASTM D 7624 : 2018
|
Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry |
ASTM B 873 : 2017
|
Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417 |
ASTM D 7271 : 2006 : R2020
|
Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer |
ASTM F 904 : 2016
|
Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials |
ASTM E 1194 : 2017
|
Standard Test Method for Vapor Pressure |
ASTM D 5306 : 1992 : R2018
|
Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids |
ASTM D 3321 : 2019
|
Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants |
ASTM F 1515 : 2015
|
Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change |
ASTM E 398 : 2020
|
Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement |
ASTM D 2868 : 2017
|
Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White |
ASTM D 6130 : 2011 : R2018
|
Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
ASTM D 5071 : 2006 : R2013
|
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
ASTM D 5836 : 2020
|
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
ASTM D 4213 : 2008 : R2016
|
Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss |
ASTM D 6559 : 2000 : REV A : R2016 : EDT 1
|
Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks |
ASTM C 1275 : 2018
|
Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
ASTM F 3107 : 2014
|
Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems |
ASTM D 1824 : 2016
|
Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
ASTM D 4603 : 2018
|
Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer |
ASTM D 7370/D7370M : 2014
|
Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
ASTM D 2065 : 2003 : R2017
|
Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress |
ASTM E 110 : 2014
|
Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers |
ASTM D 6762 : 2018
|
Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings |
ASTM D 6499 : 2018
|
Standard Test Method for Immunological Measurement of Antigenic Protein in Hevea Natural Rubber (HNR) and its Products |
ASTM D 1667 : 2017
|
Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell) |
ASTM D 5084 : 2016 : REV A
|
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter |
ASTM F 2516 : 2018
|
Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials |
ASTM C 1067 : 2020
|
Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials |
ASTM D 5828 : 1997 : R2018
|
Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
ASTM C 1427 : 2016
|
Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
ASTM D 1499 : 2013
|
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics |
ASTM D 6857/D6857M : 2018
|
Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method |
ASTM C 1501 : 2019
|
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
ASTM E 3039 : 2020
|
Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens |
ASTM C 747 : 2016
|
Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance |
ASTM D 7972 : 2014 : R2020
|
Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature |
ASTM E 2455 : 2006 : R2013
|
Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels (Withdrawn 2022) |
ASTM D 1623 : 2017
|
Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
ASTM C 1104/C1104M : 2019
|
Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
ASTM A 343/A343M : 2014 : R2019
|
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame |
ASTM D 5419 : 2014 : REV A
|
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
ASTM D 4498 : 2007 : R2015
|
Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives (Withdrawn 2021) |
ASTM D 5199 : 2012 : R2019
|
Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
ASTM D 3160 : 2020 : REV A
|
Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene) |
ASTM D 4642 : 2004 : R2016
|
Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry |
ASTM F 1438 : 1993 : R2020
|
Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components |
ASTM F 1921/F1921M : 2012 : R2018
|
Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
ASTM D 7748/D7748M : 2014 : EDT 1
|
Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products |
ASTM D 256 : 2010 : R2018
|
Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
ASTM D 3174 : 2012 : R2018 : EDT 1
|
Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal |
ASTM D 3953 : 2015
|
Standard Specification for Strapping, Flat Steel and Seals |
ASTM C 1012/C1012M : 2018 : REV B
|
Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
ASTM D 6281 : 2015
|
Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
ASTM D 882 : 2018
|
Standard Test Method for Tensile Properties of Thin Plastic Sheeting |
ASTM D 6761 : 2017
|
Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers |
ASTM D 4590 : 2018
|
Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry |
ASTM F 1284 : 2009 : R2016
|
Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
ASTM E 247 : 2001 : R2015 : EDT 1
|
Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry |
ASTM D 5296 : 2019
|
Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography |
ASTM D 6743 : 2020
|
Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids |
ASTM E 2399/E2399M : 2019
|
Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems |
ASTM G 32 : 2016
|
Standard Test Method for Cavitation Erosion Using Vibratory Apparatus |
ASTM E 1655 : 2017
|
Standard Practices for Infrared Multivariate Quantitative Analysis |
ASTM F 2338 : 2009 : R2020
|
Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method |
ASTM F 519 : 2018
|
Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments |
ASTM D 7488 : 2011 : R2016
|
Standard Test Method for Open Time of Latex Paints |
ASTM D 5629 : 2016
|
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers |
ASTM B 922 : 2020
|
Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption |
ASTM D 6109 : 2019
|
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products |
ASTM D 1894 : 2014
|
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
ASTM F 1608 : 2016
|
Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method) |
ASTM D 6740 : 2015 : R2019
|
Standard Test Method for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition |
ASTM D 7426 : 2008 : R2013
|
Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound (Withdrawn 2022) |
ASTM D 7309 : 2020
|
Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry |
ASTM E 1085 : 2016
|
Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
ASTM B 934 : 2015
|
Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements |
ASTM D 7607/D7607M : 2019
|
Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method) |
ASTM F 2878 : 2019
|
Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture |
ASTM B 557 : 2015
|
Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products |
ASTM D 5386 : 2016
|
Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
ASTM D 3354 : 2015
|
Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
ASTM F 791 : 2018
|
Standard Test Method for Stress Crazing of Transparent Plastics |
ASTM D 8271 : 2021
|
Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete |
ASTM D 8117 : 2017
|
Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry |
ASTM D 7191 : 2018
|
Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor |
ASTM D 5891/D5891M : 2019
|
Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners |
ASTM D 4275 : 2017
|
Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography |
ASTM D 8031 : 2016
|
Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration |
ASTM F 3203 : 2019
|
Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing |
ASTM E 1352 : 2016
|
Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies (Withdrawn 2022) |
ASTM D 7816 : 2012 : R2016
|
Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins |
ASTM F 2466 : 2010 : R2018
|
Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications |
ASTM D 3288/D3288M : 2020
|
Standard Test Methods for Magnet-Wire Enamels |
ASTM D 7310 : 2020
|
Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors |
ASTM F 2102 : 2017
|
Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants |
ASTM D 7028 : 2007 : R2015
|
Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) |
ASTM D 3591 : 2017
|
Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds |
ASTM F 2617 : 2015
|
Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry |
ASTM C 1335 : 2012 : R2017
|
Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
ASTM E 1970 : 2016
|
Standard Practice for Statistical Treatment of Thermoanalytical Data |
ASTM E 96/E96M : 2016
|
Standard Test Methods for Water Vapor Transmission of Materials |
ASTM D 4208 : 2019
|
Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method |
ASTM D 4179 : 2011 : R2017
|
Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers |
ASTM D 6583 : 2013 : R2019
|
Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption |
ASTM E 291 : 2018
|
Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) |
ASTM D 5329 : 2020
|
Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements |
ASTM F 2778 : 2009 : R2020
|
Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR) |
ASTM F 3189 : 2020
|
Standard Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete |
ASTM D 4782 : 2010 : R2016
|
Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry |
ASTM D 4944 : 2018
|
Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester |
ASTM D 5744 : 2018
|
Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell |
ASTM D 5031/D5031M : 2013 : R2018
|
Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings |
ASTM D 6099 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
ASTM D 4685/D4685M : 2015 : R2020
|
Standard Test Method for Pile Fabric Abrasion |
ASTM D 6809 : 2020 : REV A
|
Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials |
ASTM D 5528 : 2013
|
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
ASTM D 6475 : 2017
|
Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets |
ASTM B 329 : 2020
|
Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter |
ASTM D 1475 : 2013 : R2020
|
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products |
ASTM D 7708 : 2014
|
Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks |
ASTM C 1246 : 2017
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
ASTM B 647 : 2010 : R2016
|
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage |
ASTM D 5154/D5154M : 2018
|
Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test |
ASTM D 6150 : 2016
|
Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility |
ASTM E 8/E8M : 2021
|
Standard Test Methods for Tension Testing of Metallic Materials |
ASTM D 6558 : 2000 : REV A : R2015 : EDT 1
|
Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks |
ASTM D 6531 : 2000 : R2019
|
Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement |
ASTM C 1285 : 2014
|
Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
ASTM F 1702 : 2010 : R2018
|
Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus |
ASTM E 2655 : 2014 : R2020
|
Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods |
ASTM D 7253 : 2016
|
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols |
ASTM C 179 : 2014 : R2019
|
Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens |
ASTM D 1726 : 2011 : R2019
|
Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins |
ASTM C 1869 : 2018
|
Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites |
ASTM E 1488 : 2012 : R2018
|
Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods |
ASTM F 2055 : 2017
|
Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method |
ASTM D 6175 : 2003 : R2019
|
Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles |
ASTM D 5450/D5450M : 2016
|
Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
ASTM D 6357 : 2019
|
Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Furnace Atomic Absorption Spectrometry |
ASTM D 6855 : 2017
|
Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode |
ASTM B 212 : 2017
|
Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel |
ASTM D 2866 : 2011 : R2018
|
Standard Test Method for Total Ash Content of Activated Carbon |
ASTM D 6580 : 2017
|
Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings |
ASTM D 5766/D5766M : 2011 : R2018
|
Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates |
ASTM D 5994/D5994M : 2010 : R2015 : EDT 1
|
Standard Test Method for Measuring Core Thickness of Textured Geomembranes |
ASTM D 5074 : 1990 : R2019 : EDT 1
|
Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures |
ASTM D 2519 : 2019 : REV A
|
Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test |
ASTM F 1632 : 2003 : R2018
|
Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes |
ASTM D 4672 : 2018
|
Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols |
ASTM E 246 : 2010 : R2015
|
Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry |
ASTM D 7100 : 2011 : R2020
|
Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions |
ASTM C 471M : 2020 : REV A
|
Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) |
ASTM D 3467 : 2004 : R2020
|
Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon |
ASTM D 7977 : 2019
|
Standard Test Methods for Polymer Content of AMS (α-Methylstyrene) |
ASTM F 2251 : 2013 : R2018
|
Standard Test Method for Thickness Measurement of Flexible Packaging Material |
ASTM F 2013 : 2010 : R2016
|
Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector |
ASTM D 4716/D4716M : 2020
|
Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head |
ASTM D 7011 : 2015 : R2019
|
Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection |
ASTM E 810 : 2020
|
Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry |
ASTM F 2853 : 2010 : R2015
|
Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams |
ASTM E 202 : 2018
|
Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols |
ASTM G 152 : 2013
|
Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM D 3505 : 2018
|
Standard Test Method for Density or Relative Density of Pure Liquid Chemicals |
ASTM F 218 : 2013 : R2020
|
Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass |
ASTM G 132 : 1996 : R2018
|
Standard Test Method for Pin Abrasion Testing |
ASTM E 2931 : 2013 : R2019
|
Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds |
ASTM D 3967 : 2016
|
Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens |
ASTM D 7882 : 2020
|
Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode |
ASTM D 1631 : 2010 : R2018 : EDT 1
|
Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method |
ASTM D 852 : 2020
|
Standard Test Method for Solidification Point of Benzene |
ASTM E 643 : 2015
|
Standard Test Method for Ball Punch Deformation of Metallic Sheet Material |
ASTM C 531 : 2018
|
Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes |
ASTM D 542 : 2014
|
Standard Test Method for Index of Refraction of Transparent Organic Plastics |
ASTM E 2653 : 2015
|
Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories |
ASTM D 6143 : 2018
|
Standard Test Method for Iron Content of Bisphenol A (4,4′ - Isopropylidenediphenol) |
ASTM D 1994 : 2007 : R2015
|
Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives (Withdrawn 2021) |
ASTM E 2694 : 2016
|
Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids |
ASTM D 6266 : 2000 : REV A : R2017
|
Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
ASTM E 517 : 2019
|
Standard Test Method for Plastic Strain Ratio r for Sheet Metal |
ASTM D 7313 : 2020
|
Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry |
ASTM C 110 : 2020
|
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone |
ASTM F 355 : 2016 : EDT 1
|
Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play |
ASTM D 3575 : 2020
|
Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers |
ASTM E 2008 : 2017
|
Standard Test Methods for Volatility Rate by Thermogravimetry |
ASTM D 5235 : 2018
|
Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products |
ASTM B 527 : 2020
|
Standard Test Method for Tap Density of Metal Powders and Compounds |
ASTM E 1582 : 2017
|
Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers |
ASTM D 7348 : 2013
|
Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues |
ASTM D 4562 : 2001 : R2019
|
Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen |
|