ASTM D 7608 : 2018
|
Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
|
ASTM A 746 : 2018
|
Standard Specification for Ductile Iron Gravity Sewer Pipe
|
ASTM D 1883 : 2016
|
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
|
ASTM E 3163 : 2018
|
Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action
|
ASTM D 425 : 2017
|
Standard Test Method for Centrifuge Moisture Equivalent of Soils (Withdrawn 2024)
|
ASTM D 6913/D6913M : 2017
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
|
ASTM B 788/B788M : 2009 : R2014
|
Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
|
ASTM D 2435/D2435M : 2011
|
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
|
ASTM F 1668 : 2016
|
Standard Guide for Construction Procedures for Buried Plastic Pipe
|
ASTM D 4546 : 2014 : EDT 1
|
Standard Test Methods for One-Dimensional Swell or Collapse of Soils
|
ASTM F 2787 : 2013 : R2018
|
Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
|
ASTM C 1479 : 2016
|
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
|
ASTM A 798/A798M : 2017
|
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
|
ASTM D 2774 : 2012
|
Standard Practice for Underground Installation of Thermoplastic Pressure Piping
|
ASTM D 7181 : 2011
|
Method for Consolidated Drained Triaxial Compression Test for Soils
|
ASTM D 4253 : 2016
|
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
|
ASTM D 7758 : 2017
|
Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
|
ASTM D 7928 : 2017
|
Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
|
ASTM D 5092/D5092M : 2016
|
Standard Practice for Design and Installation of Groundwater Monitoring Wells
|
ASTM D 420 : 2018
|
Standard Guide for Site Characterization for Engineering Design and Construction Purposes
|
ASTM D 6088 : 2006 : R2016
|
Standard Practice for Installation of Geocomposite Pavement Drains
|
ASTM E 2993 : 2016
|
Standard Guide for Evaluating Potential Hazard as a Result of Methane in the Vadose Zone
|
ASTM C 1675 : 2019
|
Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
|
ASTM C 12 : 2017
|
Standard Practice for Installing Vitrified Clay Pipe Lines
|
ASTM B 790/B790M : 2016
|
Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
|
ASTM B 789/B789M : 2016
|
Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
|
ASTM D 3839 : 2014
|
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
|
ASTM D 3550/D3550M : 2017
|
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
|
ASTM D 6938 : 2017 : REV A
|
Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
|
ASTM E 2392/E2392M : 2010 : R2016
|
Standard Guide for Design of Earthen Wall Building Systems
|
ASTM D 4083 : 1989 : R2016
|
Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
|
ASTM D 6528 : 2017
|
Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils
|
ASTM D 4254 : 2016
|
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
|
ASTM D 1452/D1452M : 2016
|
Standard Practice for Soil Exploration and Sampling by Auger Borings
|
ASTM D 1586/D1586M : 2018
|
Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
|
ASTM D 6066 : 2011
|
Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential (Withdrawn 2020)
|
ASTM D 6467 : 2013 : EDT 1
|
Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
|
ASTM D 4972 : 2019
|
Standard Test Methods for pH of Soils
|
ASTM D 653 : 2014
|
Standard Terminology Relating to Soil, Rock, and Contained Fluids
|
ASTM D 4186/D4186M : 2012 : EDT 1
|
Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
|
ASTM D 8167/D8167M : 2018 : REV A
|
Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
|
ASTM D 1140 : 2017
|
Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
|
ASTM E 2583 : 2007 : R2015
|
Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
|
ASTM D 854 : 2014
|
Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
|
ASTM D 2488 : 2017 : EDT 1
|
Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
|
ASTM D 4647/D4647M : 2013
|
Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
|
ASTM D 8204 : 2018
|
Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners
|
ASTM D 4318 : 2017 : EDT 1
|
Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
|
ASTM F 3016/F3016M : 2014
|
Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
|
ASTM A 807/A807M : 2017
|
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
|
ASTM D 698 : 2012 : EDT 2
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
|
ASTM D 7277 : 2016
|
Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
|
ASTM D 4221 : 2018
|
Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
|
ASTM D 5299/D5299M : 2018
|
Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
|
ASTM D 5321/D5321M : 2019
|
Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
|
ASTM D 2850 : 2015
|
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
|
ASTM D 5101 : 2012 : R2017
|
Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
|
ASTM D 3999/D3999M : 2011 : EDT 1
|
Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020)
|
ASTM D 3080/D3080M : 2011
|
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020)
|
ASTM C 1821/C1821M : 2016
|
Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
|
ASTM D 1557 : 2012 : EDT 1
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
|
ASTM D 6243/D6243M : 2016
|
Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
|
ASTM A 796/A796M : 2017 : REV A
|
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
|
ASTM C 1479M : 2016
|
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
|