ASTM D 3039/D3039M : 2017
Current
The latest, up-to-date edition.
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
Hardcopy , PDF
English
09-11-2017
This test method determines the in-plane tensile properties of polymer matrix composite materials reinforced by high-modulus fibers.
Committee |
D 30
|
DocumentType |
Test Method
|
Pages |
13
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method determines the in-plane tensile properties of polymer matrix composite materials reinforced by high-modulus fibers. The composite material forms are limited to continuous fiber or discontinuous fiber-reinforced composites in which the laminate is balanced and symmetric with respect to the test direction.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
SAE AMS6562 | Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials |
ASTM D 3171 : 1999 | Standard Test Methods for Constituent Content of Composite Materials |
ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
ASTM E 83 : 2023 | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM E 177 : 1990 : REV A : R1996 | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
ASTM E 1012 : 2014 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM D 2584 : 2002 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
ASTM D 3878 : 2002 : REV A | Standard Terminology for Composite Materials |
ASTM E 83 : 2000 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
ASTM D 3878 : 2023 | Standard Terminology for Composite Materials |
ASTM E 83 : 2016 | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
ASTM E 1237 : 1993 : R1998 | Standard Guide for Installing Bonded Resistance Strain Gages |
ASTM D 3878 : 2015 | Standard Terminology for Composite Materials |
ASTM D 2584 : 2008 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
ASTM D 3878 : 2019 | Standard Terminology for Composite Materials |
ASTM E 83 : 1998 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM D 3878 : 2000 | Standard Terminology Composite Materials |
ASTM D 2584 : 1994 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
ASTM D 3171 : 2011 | Standard Test Methods for Constituent Content of Composite Materials |
ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 2734 : 2023 | Standard Test Methods for Void Content of Reinforced Plastics |
ASTM E 1012 : 1999 | Standard Practice for Verification of Specimen Alignment Under Tensile Loading |
ASTM D 2734 : 2016 | Standard Test Methods for Void Content of Reinforced Plastics |
ASTM E 1012 : 2012 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
ASTM E 122 : 2017 : R2022 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
ASTM E 122 : 2017 | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
ASTM E 1012 : 2014 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM D 3878 : 2003 : REV A | Standard Terminology for Composite Materials |
ASTM D 2584 : 2011 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
ASTM E 1237 : 1993 : R2009 | Standard Guide for Installing Bonded Resistance Strain Gages |
ASTM D 3878 : 2016 | Standard Terminology for Composite Materials |
ASTM D 3878 : 2019 : REV A | Standard Terminology for Composite Materials |
ASTM D 3878 : 2020 : REV A | Standard Terminology for Composite Materials |
ASTM D 3878 : 1998 | Standard Terminology Composite Materials |
ASTM D 3171 : 2022 | Standard Test Methods for Constituent Content of Composite Materials |
ASTM D 3878 : 2018 | Standard Terminology for Composite Materials |
ASTM E 1012 : 2012 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM D 3171 : 2009 | Standard Test Methods for Constituent Content of Composite Materials |
ASTM D 3878 : 2002 | Standard Terminology for Composite Materials |
ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 3878 : 2020 : REV B | Standard Terminology for Composite Materials |
ASTM E 1237 : 1993 : R2003 | Standard Guide for Installing Bonded Resistance Strain Gages |
ASTM D 2584 : 1968 | Standard Method Of Test For Ignition Loss Of Cured Reinforced Resins |
ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 1012 : 2005 | Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM D 3878 : 2004 | Standard Terminology for Composite Materials |
ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
ASTM E 1237 : 1993 : R2014 | Standard Guide for Installing Bonded Resistance Strain Gages |
ASTM D 2734 : 1994 | Standard Test Methods for Void Content of Reinforced Plastics |
ASTM D 3878 : 2007 : R2013 | Standard Terminology for Composite Materials |
ASTM D 3878 : 2020 : REDLINE | Standard Terminology for Composite Materials |
ASTM D 3878 : 2020 | Standard Terminology for Composite Materials |
ASTM D 2584 : 2018 | Standard Test Method for Ignition Loss of Cured Reinforced Resins |
ASTM D 3878 : 2003 | Standard Terminology for Composite Materials |
ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 3878 : 2007 | Standard Terminology for Composite Materials |
ASTM D 2734 : 2009 | Standard Test Methods for Void Content of Reinforced Plastics |
ASTM D 3171 : 1999 : R2004 | Standard Test Methods for Constituent Content of Composite Materials |
ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM D 3171 : 2015 | Standard Test Methods for Constituent Content of Composite Materials |
ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
ASTM D 3878 : 2004 : REV A | Standard Terminology for Composite Materials |
ASTM D 3171 : 2006 | Standard Test Methods for Constituent Content of Composite Materials |
ASTM E 1012 : 2019 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 4 : 2024 | Standard Practices for Force Calibration and Verification of Testing Machines |
ASTM D 3878 : 2001 | Standard Terminology Composite Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.