ASTM D 3468/D3468M : 1999 : R2013 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
Hardcopy , PDF
08-08-2020
English
01-05-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 04.04, 2015 Specifies liquid-applied neoprene and chlorosulfonated polyethylene synthetic rubber solutions suitable for use in roofing and waterproofing.
| Committee |
D 08
|
| DevelopmentNote |
Supersedes ASTM D 3468. (07/2013)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers liquid-applied neoprene and chlorosulfonated polyethylene synthetic rubber solutions suitable for use in roofing and waterproofing.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3The following precautionary caveat pertains only to the test method portion, Section 9, of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM D 1644 : 2001 | Standard Test Methods for Nonvolatile Content of Varnishes |
| ASTM D 1149 : 2016 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1824 : 1995 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| ASTM D 429 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
| ASTM D 1644 : 2001 : R2006 | Standard Test Methods for Nonvolatile Content of Varnishes |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM D 1824 : 2016 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D 1149 : 2015 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1644 : 2001 : R2012 | Standard Test Methods for Nonvolatile Content of Varnishes |
| ASTM D 1149 : 2007 | Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment |
| ASTM D 1644 : 2001 : R2017 | Standard Test Methods for Nonvolatile Content of Varnishes |
| ASTM D 1640 : 1983 : R1989 : EDT 1 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 1824 : 1966 : R1972 | Standard Method Of Test For Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer |
| ASTM D 1149 : 2018 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1824 : 1995 : R2010 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D 1640 : 2003 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 1149 : 2007 : R2012 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1640 : 1995 : R1999 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 1149 : 1978 : REV A | Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen) |
| ASTM D 1640 : 2003 : R2009 | Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature |
| ASTM D 1824 : 2016 : REDLINE | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D 1824 : 1995 : R2002 | Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 1149 : 1999 | Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.