ASTM D 5531 : 2017 : REDLINE
|
Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
ASTM D 6675 : 2001 : R2015
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
MIL-DTL-24607 Revision B:2008
|
ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS |
MIL-DTL-1115 Revision E:2010
|
ENAMEL, INTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
MIL-E-52891 Revision B:1988
|
ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
ASTM D 7377 : 2009
|
Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet |
DOD E 24635 : (1)
|
ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
ASTM D 6189 : 1997 : R2008
|
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
ASTM D 7306 : 2007 : R2013
|
Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation |
MIL-PRF-32584 Base Document:2017
|
Deck Covering Materials, Monolithic |
MIL-DTL-24631 Revision A:1997
|
PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
MIL-PRF-24763 Revision B:2009
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
MIL W 3688 : C
|
WAX EMULSION (RUST INHIBITING) |
ASTM D 6675 : 2001 : R2011
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
ASTM D 6490 : 1999
|
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
MIL-PRF-85322 Revision C:2014
|
COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
ASTM D 2353 : 1983
|
Method of Test for Flow Ratings of Organic Coatings Using the Shell Flow Comparator (Withdrawn 1990) |
ASTM D 522 : 1993 : REV A
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
ASTM D 6279 : 2015 : REDLINE
|
Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings |
TT-R-2918 Revision A:2001
|
REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
ASTM D 3322 : 1982 : R2001
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 1212 : 1991 : R1996 : EDT 1
|
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 2803 : 2009
|
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
ASTM D 2794 : 1993 : R1999 : EDT 1
|
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM D 1212 : 1991 : R2013
|
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 2248 : 2001 : REV A : R2007
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM D 3089 : 1997 : R2008
|
Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
ASTM D 6577 : 2015 : REDLINE
|
Standard Guide for Testing Industrial Protective Coatings |
ASTM D 4138 : 2007 : REV A : R2017
|
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
ASTM D 1005 : 1995 : R2007
|
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
ASTM D 1474 : 1998
|
Standard Test Methods for Indentation Hardness of Organic Coatings |
ASTM D 1186 : 2001
|
Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) |
ASTM D 2248 : 2001 : REV A : R2018
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM E 1795 : 2017 : REDLINE
|
Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 1212 : 1991 : R2001
|
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 1212 : 1991 : R2007
|
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 522/D522M : 2017 : REDLINE
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
ASTM D 3719 : 2000
|
Standard Test Method for Quantifying Dirt Collection on Coated Exterior Panels (Withdrawn 2009) |
ASTM D 6486 : 2001
|
Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
ASTM D 6905 : 2003 : R2012
|
Standard Test Method for Impact Flexibility of Organic Coatings |
ASTM E 1797 : 2012
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 3105 : 2017 : REDLINE
|
Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials |
ASTM D 7091 : 2013 : REDLINE
|
Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
ASTM D 2134 : 1993 : R2001
|
Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
NACE RP 02 81 : 2004
|
METHOD FOR CONDUCTING COATING (PAINT) PANEL EVALUATION TESTING IN ATMOSPHERIC EXPOSURES |
MIL E 15090 : C
|
ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
MIL-I-24718 Base Document:1990
|
INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING - GENERAL SPECIFICATION FOR |
ASTM D 6675 : 2001 : R2006
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
ASTM D 6490 : 1999 : R2006
|
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
SSPC-PAINT 29 : 2014
|
ZINC DUST PIGMENTED PRIMER, PERFORMANCE-BASED |
ASTM D 7377 : 2009 : R2013
|
Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet |
SAE AMS P 21600 : 2013
|
PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
MIL E 24635 : B
|
ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
ASTM D 4518 : 1991
|
Standard Test Methods for Measuring Static Friction of Coating Surfaces (Withdrawn 2000) |
ASTM D 658 : 1991
|
Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996) |
MIL-PRF-23377 Revision K:2012
|
PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
ASTM D 1400 : 2000
|
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) |
TT-P-2756 Revision A:1996
|
POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
MIL-PRF-81352 Revision C:2005
|
COATINGS, AIRCRAFT TOUCH-UP |
ASTM D 6490 : 1999 : R2014
|
Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels |
ASTM D 4938 : 1989 : R2007
|
Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water |
ASTM D 6905 : 2003
|
Standard Test Method for Impact Flexibility of Organic Coatings |
ASTM D 711 : 2010 : R2015
|
Standard Test Method for No-Pick-Up Time of Traffic Paint |
ASTM D 3964 : 2010 : R2015
|
Standard Practice for Selection of Coating Specimens for Appearance Measurements |
ASTM D 3260 : 2001 : R2005
|
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
ASTM D 1005 : 1995 : R2013
|
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
ASTM D 522 : 1993 : REV A : R2001
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
ASTM D 4141/D4141M : 2014 : REDLINE
|
Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings |
ASTM D 3322 : 1982 : R2011
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 1005 : 1995
|
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
ASTM D 4138 : 2007 : REV A : R2013
|
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
ASTM D 3322 : 1982 : R2005
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 6486 : 2001 : R2011
|
Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
ASTM D 3260 : 2001 : R2011
|
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
ASTM D 1474 : 1998 : R2008
|
Standard Test Methods for Indentation Hardness of Organic Coatings |
ASTM D 2248 : 2001
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM D 2803 : 2009 : R2015
|
Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
ASTM D 5767 : 2017-09
|
TEST METHODS FOR INSTRUMENTAL MEASUREMENT OF DISTINCTNESS-OF-IMAGE GLOSS OF COATING SURFACES |
ASTM D 2134 : 1993 : R2007
|
Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
ASTM E 1828 : 2001
|
Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010) |
ASTM D 2248 : 2001 : REV A : R2013
|
Standard Practice for Detergent Resistance of Organic Finishes |
ASTM D 3170/D3170M : 2014 : REDLINE
|
Standard Test Method for Chipping Resistance of Coatings |
ASTM D 333 : 2001 : R2007
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 6899 : 2003
|
Standard Guide for Laboratory Cyclic Corrosion Testing of Automotive Painted Steel (Withdrawn 2010) |
ASTM D 1212 : 1991
|
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
MIL-C-27725 Revision B:1969
|
COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
ASTM D 4938 : 1989 : R1996
|
Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water |
MIL-PRF-23236 Revision D:2009
|
Coating Systems for Ship Structures |
MIL-PRF-85285 Revision E:2012
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
ASTM D 6905 : 2003 : R2008
|
Standard Test Method for Impact Flexibility of Organic Coatings |
MIL-DTL-15090 Revision E:2010
|
ENAMEL, EQUIPMENT, LIGHT GRAY, (NAVY FORMULA NO. 111) |
ASTM D 4712 : 1987 : REV A : R2001
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
BS ISO 16862 : 2003 AMD 16867
|
PAINTS AND VARNISHES - EVALUATION OF SAG RESISTANCE |
MIL-PRF-24635 Revision E:2009
|
COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
ASTM D 1653 : 2013 : REDLINE
|
Standard Test Methods for Water Vapor Transmission of Organic Coating Films |
ASTM D 3323 : 1980 : R1988 : EDT 1
|
Guide for Testing Interior Solvent-Thinned Flat Wall Paints (Withdrawn 1993) |
ASTM D 2794 : 1993
|
TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
ASTM D 2091 : 1996
|
Standard Test Method for Print Resistance of Lacquers |
ASTM D 5178 : 2016 : REDLINE
|
Standard Test Method for Mar Resistance of Organic Coatings |
ASTM D 3399 : 1981 : R1995
|
Standard Specification for General-Purpose Synthetic Detergent Liquid (Withdrawn 2000) |
ASTM D 522 : 1993 : REV A : R2008
|
Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
ASTM D 3322 : 1982 : R1996 : EDT 1
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 333 : 2001 : R2013
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 6486 : 2001 : R2005
|
Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
ASTM D 4712 : 1987 : REV A : R1996
|
Standard Guide for Testing Industrial Water-Reducible Coatings |
ASTM D 4039 : 2009
|
Standard Test Method for Reflection Haze of High-Gloss Surfaces |
ASTM D 7306 : 2007
|
Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation |
ASTM D 2248 : 2001 : REV A
|
Standard Practice for Detergent Resistance of Organic Finishes |
DIN EN ISO 16862:2006-08
|
Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
ISO 16862:2003
|
Paints and varnishes Evaluation of sag resistance |
ASTM D 2197 : 2016 : REDLINE
|
Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
ASTM D 7306 : 2007 : R2017
|
Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation |
ASTM D 4938 : 1989 : R2013
|
Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water (Withdrawn 2022) |
ASTM D 2485 : 2018 : REDLINE
|
Standard Test Methods for Evaluating Coatings For High Temperature Service |
MIL-DTL-3688 Revision D:2005
|
WAX EMULSION (RUST INHIBITING) |
SSPC-PA 15 : 2013
|
MATERIAL AND PREPARATION REQUIREMENTS FOR STEEL TEST PANELS USED TO EVALUATE THE PERFORMANCE OF INDUSTRIAL COATINGS |
ASTM D 4587 : 2011 : REDLINE
|
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
ASTM D 4039 : 2009 : R2015
|
Standard Test Method for Reflection Haze of High-Gloss Surfaces |
ASTM D 6132 : 2013
|
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
ASTM D 7538 : 2009 : R2013
|
Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device |
ASTM D 3468/D3468M : 1999 : R2013 : EDT 1
|
Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
MIL E 24763 : A
|
ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
ASTM D 2091 : 1996 : R2011
|
Standard Test Method for Print Resistance of Lacquers |
ASTM D 3260 : 2001
|
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
ASTM D 7538 : 2009
|
Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device |
ASTM D 2134 : 1993 : R2012
|
Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
ASTM D 4938 : 1989 : R2002
|
Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water |
ASTM D 1005 : 1995 : R2001
|
Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
ASTM D 4712 : 1987 : REV A : R2005
|
Standard Guide for Testing Industrial Water-Reducible Coatings (Withdrawn 2014) |
ASTM D 870 : 2015
|
Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
ASTM D 523 : 2014 : R2018
|
Standard Test Method for Specular Gloss |
ASTM E 1797 : 2012 : R2017 : EDT 1
|
Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 3964 : 2010
|
Standard Practice for Selection of Coating Specimens for Appearance Measurements |
ASTM D 4138 : 2007 : REV A
|
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
ASTM D 333 : 2001
|
Standard Guide for Clear and Pigmented Lacquers |
ASTM D 6675 : 2001
|
Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
ASTM D 1474 : 1998 : R2002
|
Standard Test Methods for Indentation Hardness of Organic Coatings |
ASTM D 2794 : 1993 : R2010
|
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM D 4138 : 2007
|
Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means |
ASTM D 2247 : 2015 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
GOST 849:2018
|
Primary nickel. SpecificationsE |
BS EN ISO 16862:2006
|
Paints and varnishes. Evaluation of sag resistance |
EN ISO 16862:2006
|
Paints and varnishes - Evaluation of sag resistance (ISO 16862:2003) |
CGSB 1.71-38 : 1996
|
METHODS OF TESTING PAINTS AND PIGMENTS - BLUSHING RESISTANCE OF LACQUER FINISHES |
ASTM D 6189 : 1997 : R2014
|
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
ASTM D 6695 : 2016 : REDLINE
|
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings |
ASTM D 6189 : 1997 : R2003
|
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
ASTM D 3260 : 2001 : R2017
|
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
ASTM D 1735 : 2014 : REDLINE
|
Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
ASTM D 2794 : 1993 : R2004
|
Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
CGSB 1.501 : M89
|
METHOD FOR PERMEANCE OF COATED WALLBOARD |
MIL-I-24092 Revision D:1993
|
INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
MIL-PRF-85582 Revision E:2012
|
PRIMER COATINGS: EPOXY, WATERBORNE |
MIL-PRF-32587 Base Document:2018
|
Remover, Paint, Hap-Free, Neutral |
ASTM D 2454 : 2014-03
|
PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS |
ASTM D 8163 : 2017
|
Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings |
ASTM D 7514 : 2014 : REDLINE
|
Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment |
ASTM D 2134 : 1993
|
Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker |
ASTM D 711 : 2010
|
Standard Test Method for No-Pick-Up Time of Traffic Paint |
ASTM D 2091 : 1996 : R2017
|
Standard Test Method for Print Resistance of Lacquers |
ASTM D 5895 : 2013 : REDLINE
|
Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
ASTM D 6132 : 2013 : R2017
|
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage |
ASTM D 3322 : 1982 : R2017
|
Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal |
ASTM D 2091 : 1996 : R2003
|
Standard Test Method for Print Resistance of Lacquers |
ASTM D 3468 : 1999
|
Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
ASTM D 1212 : 1991 : R2007 : EDT 1
|
Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings |
ASTM D 7187 : 2015 : REDLINE
|
Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching |
ASTM D 6486 : 2001 : R2017
|
Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings |
ASTM D 4708 : 2012 : REDLINE
|
Standard Practice for Preparation of Uniform Free Films of Organic Coatings |
ASTM D 523 : 2014
|
Standard Test Method for Specular Gloss |
ASTM D 2370 : 2016 : REDLINE
|
Standard Test Method for Tensile Properties of Organic Coatings |
ASTM D 6189 : 1997
|
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
ASTM D 3359 : 2017 : REDLINE
|
Standard Test Methods for Rating Adhesion by Tape Test |
ASTM D 5724 : 2016 : REDLINE
|
Standard Specification for Gouache Paints |