ASTM D 3575 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
Hardcopy , PDF
26-05-2020
English
01-01-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.These test methods apply to flexible closed cell materials made from olefin polymers or blends of olefin polymers with other polymers as defined in Section 3.
| Committee |
D 20
|
| DocumentType |
Test Method
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1These test methods apply to flexible closed cell materials made from olefin polymers or blends of olefin polymers with other polymers as defined in Section 3.
1.2These test methods cover test procedures only. Product requirements are outlined in Specification D4819.
1.3Unless specifically stated otherwise, by agreement between the purchaser and supplier, all tests shall be performed in accordance with the test methods specified in this standard.
1.4The values stated in SI units are to be regarded as the standard.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability or regulatory limitations prior to use.
| ASTM E 1996 : 2017 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM D 4819 : 2013 | Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics |
| ASTM C 1427 : 2016 | Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form |
| ASTM F 1551 : 2009 : R2017 | Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials |
| ASTM D 1056 : 2007 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
| ASTM D 1349 : 2014 : R2019 | Standard Practice for Rubber—Standard Conditions for Testing |
| ASTM D 1596 : 2014 | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM D 2863 : 2008 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 1596 : 1997 : R2003 | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM D 1056 : 1968 : EDT 1 | Standard Specification for Sponge and Expanded Cellular Rubber Products |
| ASTM D 1596 : 1997 : R2011 | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM D 1056 : 2000 | Standard Specification for Flexible Cellular Materials-Sponge or Expanded Rubber |
| ASTM D 2863 : 2012 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 1667 : 1976 : R1990 | Standard Specification for Flexible Cellular MaterialsÐVinyl Chloride Polymers and Copolymers (Closed-Cell Foam) |
| ASTM D 2863 : 2000 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 1667 : 2005 | Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) |
| ASTM D 1667 : 1997 | Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam) |
| ASTM D 2863 : 2006 : REV A | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 2863 : 2009 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 1596 : 1997 | Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material |
| ASTM D 2863 : 1995 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-like Combustion of Plastics (Oxygen Index) |
| ASTM D 4819 : 2013 | Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics |
| ASTM D 1349 : 1999 | Standard Practice for Rubber-Standard Temperatures For Testing |
| ASTM D 2863 : 2019 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 1349 : 2009 | Standard Practice for Rubber-Standard Temperatures for Testing |
| ASTM D 1349 : 2014 | Standard Practice for Rubber—Standard Conditions for Testing |
| ASTM D 2863 : 2006 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 1056 : 2014 | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
| ASTM D 1667 : 2005 : R2011 | Standard Specification for Flexible Cellular Materials<char: emdash>Poly (Vinyl Chloride) Foam (Closed-Cell) |
| ASTM D 2863 : 2017 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 4819 : 1996 | Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics |
| ASTM D 1349 : 2007 | Standard Practice for Rubber-Standard Temperatures for Testing |
| ASTM D 2863 : 2017 : REV A | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 1667 : 2017 | Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell) |
| ASTM D 2863 : 2010 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 2863 : 2012 : EDT 1 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 2863 : 2013 | Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.