ASTM D 3667 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
Available format(s)
Hardcopy , PDF
Superseded date
12-11-2022
Superseded by
Language(s)
English
Published date
11-07-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 11
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the general requirements for materials used in rubber seals of flat-plate solar collectors, except vertically mounted passive collectors. Particular applications may necessitate other requirements that would take precedence over these requirements when specified.
1.2The design requirement pertains only to permissible deflections of the rubber during thermal expansion or contraction of the seal in use and the tolerances in dimensions of molded and extruded seals.
1.3This specification does not include requirements pertaining to the fabrication or installation of the seals.
1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5The following safety hazards caveat pertains only to Section 9, Test Methods, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 3903 : 2015 | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3182 : 2015 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
| ASTM D 2137 : 2011 : R2018 | Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1149 : 2016 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 2137 : 1994 : R2000 | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 3183 : 2010 | Standard Practice for Rubber<span class='unicode'>—</span>Preparation of Pieces for Test Purposes from Products |
| ASTM C 719 : 2022 | Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) |
| ASTM D 1229 : 1987 : R1997 : EDT 1 | Standard Test Method for Rubber Property-Compression Set at Low Temperatures |
| ASTM D 3182 : 2007 : R2012 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1349 : 2014 : R2019 | Standard Practice for Rubber—Standard Conditions for Testing |
| ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
| ASTM D 1415 : 2005 | Standard Test Method for Rubber Property—International Hardness |
| ASTM C 661 : 2015 : R2022 | Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
| ASTM D 1229 : 2003 : R2008 | Standard Test Method for Rubber Property-Compression Set at Low Temperatures |
| ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1415 : 1988 : R1999 | Standard Test Method for Rubber Property-International Hardness |
| ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
| ASTM D 1415 : 2018 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 3182 : 1989 : R2006 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
| ASTM D 1415 : 1988 : R2004 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
| ASTM C 661 : 2015 | Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
| ASTM D 3183 : 2009 | Standard Practice for Rubber<span class='unicode'>—</span>Preparation of Pieces for Test Purposes from Products |
| ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
| ASTM D 1149 : 2015 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1229 : 2003 | Standard Test Method for Rubber Property—Compression Set at Low Temperatures |
| ASTM D 3182 : 1989 : R2001 : EDT 1 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 412 : 2016 : EDT 1 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 3183 : 2010 : R2015 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
| ASTM D 1149 : 2007 | Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 3183 : 2007 | Standard Practice for Rubber—Preparation of Product Pieces for Test Purposes from Products |
| ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 2137 : 2010 | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
| ASTM G 155 : 2021 | Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials |
| ASTM D 1349 : 1999 | Standard Practice for Rubber-Standard Temperatures For Testing |
| ASTM D 1149 : 2018 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 3182 : 2007 | Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
| ASTM D 2137 : 2005 | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 1415 : 1968 | Standard Test Method for International Hardness Of Vulcanized Rubber |
| ASTM D 2240 : 2015 : R2021 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
| ASTM D 1415 : 1988 : R1994 | Standard Test Method for Rubber Property-International Hardness |
| ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 1229 : 2003 : R2019 | Standard Test Method for Rubber Property—Compression Set at Low Temperatures |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1349 : 2009 | Standard Practice for Rubber-Standard Temperatures for Testing |
| ASTM C 719 : 2014 : R2019 | Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) |
| ASTM D 1349 : 2014 | Standard Practice for Rubber—Standard Conditions for Testing |
| ASTM D 1229 : 2003 : R2015 | Standard Test Method for Rubber Property—Compression Set at Low Temperatures |
| ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
| ASTM D 3183 : 1984 : R1998 | Standard Practice for Rubber-Preparation of Pieces for Test Purposes from Products |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1149 : 2007 : R2012 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1149 : 1978 : REV A | Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen) |
| ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM G 155 : 2013 | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM D 1415 : 2006 : R2012 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 1415 : 2006 | Standard Test Method for Rubber Property—International Hardness |
| ASTM D 3182 : 1989 : R2001 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
| ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 1349 : 2007 | Standard Practice for Rubber-Standard Temperatures for Testing |
| ASTM D 3182 : 2021 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3182 : 1989 : R1994 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
| ASTM D 3182 : 2016 | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 3182 : 2021 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
| ASTM D 3183 : 2002 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3183 : 2010 : R2019 | Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products |
| ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
| ASTM D 1149 : 1999 | Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber |
| ASTM D 3182 : 2015 : REV A | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 2137 : 2011 | Standard Test Methods for Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.