![header thumbnail](/images/publishers\astm_cover.gif)
ASTM D 3694 : 1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
Hardcopy , PDF
11-11-2014
English
01-01-1996
CONTAINED IN VOL. 11.02, 2017 Defines the various means of preparing sample containers used for collection of waters to be analyzed for organic constituents and preservation of these samples from time of sample collection to time of analysis.
Committee |
D 19
|
DocumentType |
Standard Practice
|
Pages |
7
|
ProductNote |
Reconfirmed 1996
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1 These practices cover the various means of (1) preparing sample containers used for collection of waters to be analyzed for organic constituents and (2) preservation of such samples from the time of sample collection until the time of analysis.
1.2 The sample preservation practice is dependent upon the specific analysis to be conducted. See Section 9 for preservation practices listed with the corresponding applicable general and specific constituent test method. The preservation method for waterborne oils is given in Practice D3325. Use of the information given herein will make it possible to choose the minimum number of sample preservation practices necessary to ensure the integrity of a sample designated for multiple analysis. For further considerations of sample preservation, see the Manual on Water .
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 6.7, 6.24, and 8.1.3.
ASTM D 7572 : 2015 | Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil |
ASTM D 7979 : 2017 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 7644 : 2016 | Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
ASTM D 7597 : 2016 : R2017 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 5241 : 1992 : R2017 | Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water |
ASTM D 7600 : 2016 : R2017 | Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 7485 : 2016 | Standard Test Method for Determination of Nonylphenol, p-<emph type="bdit">tert</emph >-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 6517 : 2018 | Standard Guide for Field Preservation of Ground Water Samples |
ASTM D 6282/D6282M : 2014 | Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023) |
ASTM D 5788 : 1995 : R2017 | Standard Guide for Spiking Organics into Aqueous Samples |
ASTM D 7742 : 2017 | Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 7599 : 2016 : R2017 | Standard Test Method for Determination of Diethanolamine, Triethanolamine, <emph type="ital">N</emph>-Methyldiethanolamine and <emph type="ital">N</emph >-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 5173 : 2015 | Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide |
ASTM D 6169/D6169M : 2013 | Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
ASTM D 7574 : 2016 | Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 6520 : 2018 | Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds |
ASTM D 5810 : 1996 : R2015 | Standard Guide for Spiking into Aqueous Samples |
ASTM D 4841 : 1988 : R2018 | Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
ASTM D 7858 : 2013 : R2018 | Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 7728 : 2018 | Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance |
ASTM D 4128 : 2018 | Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry |
ASTM D 4840 : 1999 : R2018 : EDT 1 | Standard Guide for Sample Chain-of-Custody Procedures |
ASTM D 5315 : 2004 : R2017 : EDT 1 | Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization |
ASTM D 7365 : 2009 : REV A : R2015 | Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide |
ASTM D 5765 : 2016 | Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating |
ASTM D 3856 : 2011 : R2015 | Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water (Withdrawn 2024) |
ASTM D 6889 : 2003 : R2017 | Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME) |
ASTM D 6640 : 2001 : R2015 | Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations |
ASTM D 7645 : 2016 | Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
ASTM D 7598 : 2016 : R2017 | Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry |
ASTM D 7065 : 2017 | Standard Test Method for Determination of Nonylphenol, Bisphenol A, <emph type="bdit" >p-tert</emph>-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry |
ASTM D 4874 : 1995 : R2014 | Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021) |
ASTM D 5412 : 1993 | TEST METHOD FOR QUANTIFICATION OF COMPLEX POLYCYCLIC AROMATIC HYDROCARBON MIXTURES OR PETROLEUM OILS IN WATER |
ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
ASTM D 3371 : 1995 | Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography (Withdrawn 2002) |
ASTM D 3113 : 1992 : R1998 | Standard Test Methods for Sodium Salts of EDTA in Water (Withdrawn 2005) |
ASTM D 4282 : 2015 : REDLINE | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
ASTM D 5790 : 1995 | Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
ASTM D 4779 : 1993 | Standard Test Method for Total, Organic, and Inorganic Carbon in High Purity Water by Ultraviolet (UV) or Persulfate Oxidation, or Both, and Infrared Detection (Withdrawn 2002) |
ASTM D 3921 : 1996 | Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water |
ASTM D 3973 : 1985 | TEST METHOD FOR LOW-MOLECULAR WEIGHT HALOGENATED HYDROCARBONS IN WATER |
ASTM D 2330 : 2002 | Standard Test Method for Methylene Blue Active Substances (Withdrawn 2011) |
ASTM D 4657 : 1992 : R1998 | Standard Test Method for Polynuclear Aromatic Hydrocarbons in Water (Withdrawn 2005) |
ASTM D 2579 : 1993 : EDT 1 | Standard Test Method for Total Organic Carbon in Water (Withdrawn 2002) |
ASTM D 4332 : 2014 : REDLINE | Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.